BSOD error 0x0000001a

G

gerdanspy

New member
Local time
7:12 AM
Messages
2

My Computer

Computer Manufacturer/Model Number
Custom
OS
Windows 7 Professional
CPU
Intel Core 2 Extreme (Quad) CPU X9750 @3.2 Ghz
Motherboard
ASUS P5N-D LGA 775 NVIDIA nForce 750i SLI ATX
Memory
4 GB of RAM
Graphics Card(s)
ATI Radeon HD 5750
Hard Drives
Crosair Force 3 SSD 90GB;
Seagate Barracuda ST500DM002 500GB 7200 RPM
PSU
Rosewill Stallion Series RD500-2DB 500W ATX12V
Case
COOLER MASTER Elite RC-310-BWN1-GP Black Steel
Cooling
Rosewill RCX-Z90-AL 92mm Sleeve CPU Cooler
Welcome

Almost all your dumps show memory as the issue with different bug checks

BSOD Analyze

Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d8959d0787, b3b7465ee819d74d, fffff80002b18030, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : [COLOR="Blue"]memory_corruption[/COLOR]

Followup: memory_corruption
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d8959d0787, Reserved
Arg2: b3b7465ee819d74d, Reserved
Arg3: fffff80002b18030, Failure type dependent information
Arg4: 0000000000000001, Type of corrupted region, can be
	0 : A generic data region
	1 : Modification of a function or .pdata
	2 : A processor IDT
	3 : A processor GDT
	4 : Type 1 process list corruption
	5 : Type 2 process list corruption
	6 : Debug routine modification
	7 : Critical MSR modification

Debugging Details:
------------------


BUGCHECK_STR:  0x109

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

PROCESS_NAME:  System

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff80002a861c0

STACK_TEXT:  
fffff880`03387598 00000000`00000000 : 00000000`00000109 a3a039d8`959d0787 b3b7465e`e819d74d fffff800`02b18030 : nt!KeBugCheckEx


STACK_COMMAND:  kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
    fffff80002b18056 - nt!MiInitializePageAccessLogging+26
	[ f8:fa ]
1 error : !nt (fffff80002b18056)

MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  ONE_BIT

FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption

Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8018b2de00, 2, 1, fffff80002ac0469}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : [COLOR="Red"]memory_corruption ( nt!MiDeletePteRun+6af )[/COLOR]

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa8018b2de00, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ac0469, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cbd100
 fffffa8018b2de00 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiDeletePteRun+6af
fffff800`02ac0469 f00fba6f1000    lock bts dword ptr [rdi+10h],0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  FlashPlayerPlu

TRAP_FRAME:  fffff88003d6b3a0 -- (.trap 0xfffff88003d6b3a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffff88003d6b4a0
rdx=000000000001919f rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ac0469 rsp=fffff88003d6b530 rbp=000000000004d09f
 r8=0000000000000001  r9=0000000000000000 r10=fffffa80017fdbf8
r11=fffff88003d6b500 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
nt!MiDeletePteRun+0x6af:
fffff800`02ac0469 f00fba6f1000    lock bts dword ptr [rdi+10h],0 ds:00000000`00000010=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a8d769 to fffff80002a8e1c0

STACK_TEXT:  
fffff880`03d6b258 fffff800`02a8d769 : 00000000`0000000a fffffa80`18b2de00 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`03d6b260 fffff800`02a8c3e0 : 00000000`00000000 00000000`00000000 00000000`00000000 0001be67`00000080 : nt!KiBugCheckDispatch+0x69
fffff880`03d6b3a0 fffff800`02ac0469 : 0001be67`00000080 fffff680`00065ac0 fffffa80`00e71dd0 00000001`00000001 : nt!KiPageFault+0x260
fffff880`03d6b530 fffff800`02abf4f7 : fffffa80`0413d700 fffff680`00065ff8 fffffa80`0413d7d0 00000000`10030000 : nt!MiDeletePteRun+0x6af
fffff880`03d6b6e0 fffff800`02a5f405 : ffffffff`00000000 00000000`0cc2bfff fffffa80`00000000 fffffa80`0394c060 : nt!MiDeleteVirtualAddresses+0x41f
fffff880`03d6b8a0 fffff800`02d5f6da : fffff8a0`04cb83d0 fffff880`03d6bbe0 00000000`00000000 fffffa80`0394c060 : nt!MmCleanProcessAddressSpace+0x679
fffff880`03d6b8f0 fffff800`02d42bdd : 00000000`00000000 00000000`00000001 00000000`7ef59000 fffffa80`0251b6c0 : nt!PspExitThread+0x56a
fffff880`03d6b9f0 fffff800`02a80cda : 00000000`00000100 fffffa80`0394c120 00000000`00000001 fffff800`02a83ddd : nt!PsExitSpecialApc+0x1d
fffff880`03d6ba20 fffff800`02a81020 : 00000000`00000246 fffff880`03d6baa0 fffff800`02d42b50 00000000`00000001 : nt!KiDeliverApc+0x2ca
fffff880`03d6baa0 fffff800`02a8d4f7 : fffffa80`0394c060 00000000`0000053c 00000000`00000000 fffffa80`02ddb2a0 : nt!KiInitiateUserApc+0x70
fffff880`03d6bbe0 00000000`741c2e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x9c
00000000`0975ecf8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x741c2e09


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiDeletePteRun+6af
fffff800`02ac0469 f00fba6f1000    lock bts dword ptr [rdi+10h],0

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!MiDeletePteRun+6af

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4fa390f3

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0xA_nt!MiDeletePteRun+6af

BUCKET_ID:  X64_0xA_nt!MiDeletePteRun+6af

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa8018b2de00, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ac0469, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS:  fffffa8018b2de00 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiDeletePteRun+6af
fffff800`02ac0469 f00fba6f1000    lock bts dword ptr [rdi+10h],0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  FlashPlayerPlu

TRAP_FRAME:  fffff88003d6b3a0 -- (.trap 0xfffff88003d6b3a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffff88003d6b4a0
rdx=000000000001919f rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ac0469 rsp=fffff88003d6b530 rbp=000000000004d09f
 r8=0000000000000001  r9=0000000000000000 r10=fffffa80017fdbf8
r11=fffff88003d6b500 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
nt!MiDeletePteRun+0x6af:
fffff800`02ac0469 f00fba6f1000    lock bts dword ptr [rdi+10h],0 ds:00000000`00000010=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a8d769 to fffff80002a8e1c0

STACK_TEXT:  
fffff880`03d6b258 fffff800`02a8d769 : 00000000`0000000a fffffa80`18b2de00 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`03d6b260 fffff800`02a8c3e0 : 00000000`00000000 00000000`00000000 00000000`00000000 0001be67`00000080 : nt!KiBugCheckDispatch+0x69
fffff880`03d6b3a0 fffff800`02ac0469 : 0001be67`00000080 fffff680`00065ac0 fffffa80`00e71dd0 00000001`00000001 : nt!KiPageFault+0x260
fffff880`03d6b530 fffff800`02abf4f7 : fffffa80`0413d700 fffff680`00065ff8 fffffa80`0413d7d0 00000000`10030000 : nt!MiDeletePteRun+0x6af
fffff880`03d6b6e0 fffff800`02a5f405 : ffffffff`00000000 00000000`0cc2bfff fffffa80`00000000 fffffa80`0394c060 : nt!MiDeleteVirtualAddresses+0x41f
fffff880`03d6b8a0 fffff800`02d5f6da : fffff8a0`04cb83d0 fffff880`03d6bbe0 00000000`00000000 fffffa80`0394c060 : nt!MmCleanProcessAddressSpace+0x679
fffff880`03d6b8f0 fffff800`02d42bdd : 00000000`00000000 00000000`00000001 00000000`7ef59000 fffffa80`0251b6c0 : nt!PspExitThread+0x56a
fffff880`03d6b9f0 fffff800`02a80cda : 00000000`00000100 fffffa80`0394c120 00000000`00000001 fffff800`02a83ddd : nt!PsExitSpecialApc+0x1d
fffff880`03d6ba20 fffff800`02a81020 : 00000000`00000246 fffff880`03d6baa0 fffff800`02d42b50 00000000`00000001 : nt!KiDeliverApc+0x2ca
fffff880`03d6baa0 fffff800`02a8d4f7 : fffffa80`0394c060 00000000`0000053c 00000000`00000000 fffffa80`02ddb2a0 : nt!KiInitiateUserApc+0x70
fffff880`03d6bbe0 00000000`741c2e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x9c
00000000`0975ecf8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x741c2e09


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiDeletePteRun+6af
fffff800`02ac0469 f00fba6f1000    lock bts dword ptr [rdi+10h],0

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!MiDeletePteRun+6af

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4fa390f3

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0xA_nt!MiDeletePteRun+6af

BUCKET_ID:  X64_0xA_nt!MiDeletePteRun+6af

Followup: MachineOwner
---------

How many memory modules do you have? and is this a new build?

Following the steps mentioned in the tutorial below test each module for at least 8 passes
:ar: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Take all the time needed and post back results
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Self assembled
OS
Windows 10 Home 64Bit
CPU
Intel Core i5 10400 @ 2.90GHz
Motherboard
Intel Corporation DG41WV (PROCESSOR)
Memory
8.00GB Single-Channel Unknown @ 1329MHz (16-20-20-38)
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
DELL E170S
Screen Resolution
1280x1024 pixels
Hard Drives
931GB TOSHIBA DT01ACA100 (SATA)
238GB TEAM TM8PS7256G (SATA SSD)
Case
Nothing Fancy
Cooling
Fans
Keyboard
A4 Tech Co LTD
Mouse
A4 Tech Co Ltd/Logitech
Internet Speed
25 Mbps
koolkat77,

Thanks for your help.

I have two sticks of RAM, but last week I switched the slots that they were plugged into hoping it would stop the BSOD's. Yesterday when I opened the case I noticed that one RAM module was not flush in the socket. BSOD occured before and after all the RAM movement.

I have ordered two sticks of RAM(combo pack) that was on ASUS suggestion list for my MOBO. Hopefully this will fix my issue. I will use the memtest utility for my current RAM then with my new RAM and post back.

This is a build was from December 2011. I have had BSOD in the past, but the system has just started getting heavy use in the past three months where I was able to see how often the BSOD occurs. The spec for this system is listed under "My System Specs".
 

My Computer

Computer Manufacturer/Model Number
Custom
OS
Windows 7 Professional
CPU
Intel Core 2 Extreme (Quad) CPU X9750 @3.2 Ghz
Motherboard
ASUS P5N-D LGA 775 NVIDIA nForce 750i SLI ATX
Memory
4 GB of RAM
Graphics Card(s)
ATI Radeon HD 5750
Hard Drives
Crosair Force 3 SSD 90GB;
Seagate Barracuda ST500DM002 500GB 7200 RPM
PSU
Rosewill Stallion Series RD500-2DB 500W ATX12V
Case
COOLER MASTER Elite RC-310-BWN1-GP Black Steel
Cooling
Rosewill RCX-Z90-AL 92mm Sleeve CPU Cooler
Thanks for adding the system specs
Keep us updated of the results and your new ram modules as well
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Self assembled
OS
Windows 10 Home 64Bit
CPU
Intel Core i5 10400 @ 2.90GHz
Motherboard
Intel Corporation DG41WV (PROCESSOR)
Memory
8.00GB Single-Channel Unknown @ 1329MHz (16-20-20-38)
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
DELL E170S
Screen Resolution
1280x1024 pixels
Hard Drives
931GB TOSHIBA DT01ACA100 (SATA)
238GB TEAM TM8PS7256G (SATA SSD)
Case
Nothing Fancy
Cooling
Fans
Keyboard
A4 Tech Co LTD
Mouse
A4 Tech Co Ltd/Logitech
Internet Speed
25 Mbps
You must log in or register to reply here.

Similar threads

Solved Received BSOD on 04/19/26 after istalling manual windows update
Replies
9
Views
4K
torchwood
torchwood
bad_pool_header BSOD
Replies
3
Views
17K
torchwood
torchwood
BSOD during use
Replies
1
Views
74
torchwood
torchwood
WHEA-Logger - code 18 still generating after stat system
Replies
6
Views
3K
SGvagon
SGvagon
Problem with Windows Explorer crashing
Replies
11
Views
2K
Gwaihir
Gwaihir
Back
Top