Solved BSOD every first time I turn on pc

[Kuroitsuki]

Hello, I am new to the forums but I hope you will help with my problem.
Every day my pc crashes the first time I turn it on, only to restart later like nothing happened. I have a while with that problem, reinstalled windows but the problem is still there.

I have windows 7 home premium 64 OEM and I have about a year with it.
These are the dump files.


I hope I did everything right, if I messed up or you need more info please let me know,

 

[zigzag3143]

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.



Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html



Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

 

[Kuroitsuki]

Ok, after leaving memtest doing 6 passes and no errors in the screen, I restarted windows and, for the first time, it showed me 2 consecutives BSOD. I ran in safemode next and then ran Verify, checked the boxes, restarted windows normally (not in safe mode), and no blue screen... should I try restarting windows to see if it crashes? or leave it like that, it only shows BSOD right after start up, no that I can remember while in use.
Let me know your opinion thanks for the help

 

[zigzag3143]

Ok, after leaving memtest doing 6 passes and no errors in the screen, I restarted windows and, for the first time, it showed me 2 consecutives BSOD. I ran in safemode next and then ran Verify, checked the boxes, restarted windows normally (not in safe mode), and no blue screen... should I try restarting windows to see if it crashes? or leave it like that, it only shows BSOD right after start up, no that I can remember while in use.
Let me know your opinion thanks for the help

Let it run until it does crash. May take a while as it will only crash when it finds a driver mis-behaving.

 

[Kuroitsuki]

Ok, since I haven't seen BSOD since the last time I checked here, I will mark this topic as solved. But before that, if you could clear something here I would be grateful
You posted

Then select all drivers NOT provided by Microsoft and click "Next"

and I did exactly that, but what happens if I check microsoft ones? What if one of them are faulty? Sorry if the question is too stupid but I am not that computer savvy.
Thank you guys for giving me some good tools.

 

[zigzag3143]

Ok, since I haven't seen BSOD since the last time I checked here, I will mark this topic as solved. But before that, if you could clear something here I would be grateful
You posted

Then select all drivers NOT provided by Microsoft and click "Next"

and I did exactly that, but what happens if I check microsoft ones? What if one of them are faulty? Sorry if the question is too stupid but I am not that computer savvy.
Thank you guys for giving me some good tools.

You certainly can check all drivers (including MS) it just takes longer. Thats why we recommended all other drivers. MS drivers do get corrupted but far less than 3rd party ones.

 

[Kuroitsuki]

Ok then, marking this thread as solved. Thanks guys again