BSOD IRQL Not Less or Equal, KMode Exception Not Handled, Service Exce

[Mugsy420]

Hey,
I keep getting BSOD every few hours randomly. I've tried updating drivers, removing AVG, Registry cleaners, MemTest64, and Seagate drive test. Here are my dump files. View attachment 240526 I'm just stuck and need some help. Any ideas will be much appreciated.

Thanks,
Mugsy420

 

[z3r010]

The dumps are blaming sptd.sys so if you have Daemon tools please uninstall it and see how you go.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {200, 2, 1, fffff80002ad6065}

*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
[COLOR=Red][B]Probably caused by : sptd.sys ( sptd+45c7e )[/B][/COLOR]

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000200, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ad6065, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cfc100
GetUlongFromAddress: unable to read from fffff80002cfc1c0
 0000000000000200 Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KeAcquireSpinLockRaiseToDpc+55
fffff800`02ad6065 f0480fba2900    lock bts qword ptr [rcx],0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff880031fb8a0 -- (.trap 0xfffff880031fb8a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000002 rbx=0000000000000000 rcx=0000000000000200
rdx=fffffa80038691a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002ad6065 rsp=fffff880031fba30 rbp=0000000000000200
 r8=0000000000000000  r9=0000000000000000 r10=000000000000001c
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
nt!KeAcquireSpinLockRaiseToDpc+0x55:
fffff800`02ad6065 f0480fba2900    lock bts qword ptr [rcx],0 ds:00000000`00000200=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002acc569 to fffff80002accfc0

STACK_TEXT:  
fffff880`031fb758 fffff800`02acc569 : 00000000`0000000a 00000000`00000200 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`031fb760 fffff800`02acb1e0 : fffffa80`05a36010 fffff880`00000103 fffff880`07963398 00000000`00000002 : nt!KiBugCheckDispatch+0x69
fffff880`031fb8a0 fffff800`02ad6065 : fffffa80`05be1d90 fffffa80`05d5edf0 fffffa80`05d5eec8 fffffa80`06d27230 : nt!KiPageFault+0x260
fffff880`031fba30 fffff880`0618efed : fffffa80`038691a0 fffff880`0619055c 00000000`00000000 00000000`00000000 : nt!KeAcquireSpinLockRaiseToDpc+0x55
fffff880`031fba80 fffff880`0618c657 : 00000000`00000002 fffffa80`038691a0 fffffa80`05420050 00000000`00000000 : USBPORT!USBPORT_Core_DecIoRequestCount+0x31
fffff880`031fbac0 fffff880`0618cb0f : fffffa80`03825002 fffffa80`05a36010 00000000`ffffffff fffffa80`05420eb0 : USBPORT!USBPORT_Core_iCompleteDoneTransfer+0xa3b
fffff880`031fbba0 fffff880`0618a66f : fffffa80`05420eb0 fffffa80`054201a0 fffffa80`05421050 00000000`00000000 : USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x3a7
fffff880`031fbc00 fffff880`0617bf89 : fffffa80`05420050 00000000`00000000 fffffa80`05420e02 fffffa80`05420eb0 : USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xf3
fffff880`031fbc40 fffff880`00ec2c7e : fffffa80`0534b000 fffffa80`05420ec8 fffffa80`05420e00 fffff880`031fbcc8 : USBPORT!USBPORT_Xdpc_Worker+0x1d9
fffff880`031fbc70 fffffa80`0534b000 : fffffa80`05420ec8 fffffa80`05420e00 fffff880`031fbcc8 00000000`00000000 : sptd+0x45c7e
fffff880`031fbc78 fffffa80`05420ec8 : fffffa80`05420e00 fffff880`031fbcc8 00000000`00000000 fffffa80`0534c1dd : 0xfffffa80`0534b000
fffff880`031fbc80 fffffa80`05420e00 : fffff880`031fbcc8 00000000`00000000 fffffa80`0534c1dd fffff880`031d3180 : 0xfffffa80`05420ec8
fffff880`031fbc88 fffff880`031fbcc8 : 00000000`00000000 fffffa80`0534c1dd fffff880`031d3180 fffffa80`05420eb0 : 0xfffffa80`05420e00
fffff880`031fbc90 00000000`00000000 : fffffa80`0534c1dd fffff880`031d3180 fffffa80`05420eb0 fffffa80`05420ec8 : 0xfffff880`031fbcc8


STACK_COMMAND:  kb

FOLLOWUP_IP: 
sptd+45c7e
fffff880`00ec2c7e ??              ???

SYMBOL_STACK_INDEX:  9

SYMBOL_NAME:  sptd+45c7e

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: sptd

IMAGE_NAME:  sptd.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4bbd315c

FAILURE_BUCKET_ID:  X64_0xA_sptd+45c7e

BUCKET_ID:  X64_0xA_sptd+45c7e

Followup: MachineOwner

 

[Mugsy420]

update

pc finally bricked. pretty sure motherboard is fried. eventually quit getting errors and am stuck with amber flashing power button. have reset cmos, replaced psu, and tried many other things. mobo beeps with no memory and light is green but with memory it will not beep (post).