BSOD IRQL not less or equal.

[Britton30]

I messaged Blue Robot on it.

 

[x BlueRobot]

[COLOR="Red"]BugCheck 3B[/COLOR], {c0000005, fffff80003181de4, fffff88007e24c70, 0}

Probably caused by : ntkrnlmp.exe ( nt!RtlUpcaseUnicodeString+54 )

Usual causes:  System service, Device driver, graphics driver, memory

2: kd> [COLOR="SeaGreen"]!error c0000005[/COLOR]
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

The crash doesn't point to much unfortunately, but you can follow these steps:

Memory:

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Update ATI Mobility Radeon HD 4570 (if possible):

fffff880`04aa2000 fffff880`050e3000   atikmdag  [COLOR="red"]Wed Sep 09 05:22:53 2009[/COLOR] (4AA72D9D)

• http://www.sevenforums.com/graphic-cards/1810-latest-amd-catalyst-video-driver-windows-7-a.html

1. Download Driver
2. Start rb: Type: Device Manager
3. Expand Display Adapters
4. Right-Click Driver Name, Uninstall
5. Reboot
6. Run Driver Sweeper
7. Reboot
8. Install Downloaded Driver

Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:

• http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html

 

[circus0000]

I'll do the ram test tonight. I had about 4 of the similar crashes since then. Is this mainly cause by hardware, specifically the ram?

 

[x BlueRobot]

I've seen quite caused by graphics drivers and graphics cards, it depends upon the user's system. Quite a few are caused by page pool issues.

 

[circus0000]

I ran memtest for over 7 hours I got 1 pass. I updated bios and driver. But I still have the same issue. I had 4 IRQL and 2 screen freeze while playing game. During the screen freeze I can hear the sound but the screen is not working. I attached everything in the zip file anyway.

 

[x BlueRobot]

[COLOR="Red"]BugCheck A[/COLOR], {0, 2, 0, fffff80002ee3242}

Probably caused by : dxgmms1.sys ( dxgmms1!VidMmiProcessTerminationCommand+5f )

Did you run it for 1 pass?

Run some hard-drive diagnostics and follow these steps:

• Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

• SeaTools for DOS | Seagate
• CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

:info: Make sure you have the latest firmware for SSD, and ensure all the SATA and Power cables are connected to the drive.

Check for any file system errors and bad sectors using Option #2 of:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Use this command with Disk Check:

chkdsk C: /f /r

 

[circus0000]

Its a hard drive problem? I can run the diagnostic thing during the start up before the window to check for problems. Should I run memtest again? I did that for 7 hours last time and it only gave me 1 pass. Screenshot was in the zip.

 

[Britton30]

7 hours for less than two memtest passes is horrible. I have 16GB and it takes 8 hours for 3 full passes. Try doing one RAM module at once.

 

[circus0000]

I did the check disk and repair. How can I find out the result of the scan because it restarted automatically. I will do the memtest again later. But what exactly is the problem?

 

[x BlueRobot]

I'm guessing paging or memory problems, from the BSODs you have been getting, and read these steps:

• http://www.sevenforums.com/tutorials/96938-check-disk-chkdsk-read-event-viewer-log.html

 

[circus0000]

I can't find the chkdsk in event viewer. The check disk was done before loading window, or maybe the chkdsk didn't finish?

 

[x BlueRobot]

Have you checked all the chkdsk entries?

 

[circus0000]

Well I sort them by title and those are the chkdsk I can see. Is it possible that the chkdsk didn't complete and my computer just restart by itself?

 

[circus0000]

I have the startup diagnostic to test the memory which looks like the picture attached. But it overheated and shuts down my computer afterward. I'm starting to think my computer has overheating issue.

 

[circus0000]

What do I do with crystaldiskinfo anyway? What information do you need?

 

[x BlueRobot]

With the chkdsk entries have you clicked each one, and checked the General tab for a log of the results?

What are your temperatures while idle and under stress?

Post a screenshot of the CoreTemp output in both situations, remember to unselect any bloatware (programs) which may be offered during the installation process:

• Core Temp

 

[circus0000]

Sorry it was Wininit I'm supposed to look at. Here's the screenshot. chkdsk was fine I think.

 

[x BlueRobot]

Could post that chkdsk information into your post, by using copy and pasting the text into these tags into code tags? It will look like this [-code] [-/code], ignore the - I only added it so you could see the tags.

The temperatures look fine to me, I wouldn't say there is any overheating issues.

 

[circus0000]

Checking file system on C:
The type of the file system is NTFS.
Volume label is OS.

A disk check has been scheduled.
Windows will now check the disk.                         

CHKDSK is verifying files (stage 1 of 5)...
  547584 file records processed.                                          File verification completed.
  2873 large file records processed.                                      0 bad file records processed.                                        0 EA records processed.                                              44 reparse records processed.                                       CHKDSK is verifying indexes (stage 2 of 5)...
  662722 index entries processed.                                         Index verification completed.
  0 unindexed files scanned.                                           0 unindexed files recovered.                                       CHKDSK is verifying security descriptors (stage 3 of 5)...
  547584 file SDs/SIDs processed.                                         Cleaning up 857 unused index entries from index $SII of file 0x9.
Cleaning up 857 unused index entries from index $SDH of file 0x9.
Cleaning up 857 unused security descriptors.
Security descriptor verification completed.
  57570 data files processed.                                            CHKDSK is verifying Usn Journal...
  36886536 USN bytes processed.                                             Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
  547568 files processed.                                                 File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
  65149024 free clusters processed.                                         Free space verification is complete.
Windows has checked the file system and found no problems.

 472985397 KB total disk space.
 211541288 KB in 338617 files.
    179792 KB in 57571 indexes.
         0 KB in bad sectors.
    668221 KB in use by the system.
     65536 KB occupied by the log file.
 260596096 KB available on disk.

      4096 bytes in each allocation unit.
 118246349 total allocation units on disk.
  65149024 allocation units available on disk.

Internal Info:
00 5b 08 00 a7 0b 06 00 60 97 0a 00 00 00 00 00  .[......`.......
90 8b 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.
Please wait while your computer restarts.

Like this?

 

[Layback Bear]

I'm thinking that 87C at 9% load is high. I'm thinking a temperature problem. I know notebooks run hot but I think that to hot.