*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {80, 2, 0, fffff88002aad13e}
*** WARNING: Unable to verify timestamp for cm11264.sys
*** ERROR: Module load completed but symbols could not be loaded for cm11264.sys
Probably caused by : cm11264.sys ( cm11264+8613e )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000080, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88002aad13e, address which referenced memory
Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000310b100
GetUlongFromAddress: unable to read from fffff8000310b1c0
0000000000000080 Nonpaged pool
CURRENT_IRQL: 2
FAULTING_IP:
cm11264+8613e
fffff880`02aad13e 49ffcb dec r11
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: bf4.exe
TAG_NOT_DEFINED_c000000f: FFFFF800048F7FB0
TRAP_FRAME: fffff800048f72a0 -- (.trap 0xfffff800048f72a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000080 rbx=0000000000000000 rcx=fffffa800d779494
rdx=fffffa800d80dd20 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002aad13e rsp=fffff800048f7430 rbp=fffffa800d77b0b0
r8=0000000000000080 r9=0000000000000080 r10=fffffa800d80dd4c
r11=000000000000001f r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
cm11264+0x8613e:
fffff880`02aad13e 49ffcb dec r11
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002ed3129 to fffff80002ed3b80
STACK_TEXT:
fffff800`048f7158 fffff800`02ed3129 : 00000000`0000000a 00000000`00000080 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`048f7160 fffff800`02ed1da0 : fffffa80`0d80d720 fffffa80`0d80dd20 fffffa80`0d80f020 00000000`000948b0 : nt!KiBugCheckDispatch+0x69
fffff800`048f72a0 fffff880`02aad13e : 00000000`00000000 00000000`00000000 fffff800`048f74e0 fffffa80`0d77b0b0 : nt!KiPageFault+0x260
fffff800`048f7430 00000000`00000000 : 00000000`00000000 fffff800`048f74e0 fffffa80`0d77b0b0 fffffa80`0d7ed810 : cm11264+0x8613e
STACK_COMMAND: kb
FOLLOWUP_IP:
cm11264+8613e
fffff880`02aad13e 49ffcb dec r11
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: cm11264+8613e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: cm11264
IMAGE_NAME: cm11264.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4e535a4d
FAILURE_BUCKET_ID: X64_0xD1_cm11264+8613e
BUCKET_ID: X64_0xD1_cm11264+8613e
Followup: MachineOwner
---------
0: kd> lmvm cm11264
start end module name
fffff880`02a27000 fffff880`02bb2000 cm11264 T (no symbols)
Loaded symbol image file: cm11264.sys
Image path: \SystemRoot\system32\drivers\cm11264.sys
Image name: cm11264.sys
Timestamp: Tue Aug 23 13:44:13 2011 (4E535A4D)
CheckSum: 0013F60A
ImageSize: 0018B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4