BSOD need help on analysis thank you

[neyesice]

need your help sirs. very much appreciated

 

[neyesice]

newer minidump files. thanks

 

[ttran]

STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED http://www.carrona.org/bsodindx.html#top

Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL http://www.carrona.org/bsodindx.html#top

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
STOP 0x0000001A: MEMORY_MANAGEMENT http://www.carrona.org/bsodindx.html#top

Usual causes: Device driver, memory, kernel

There is an exception code ffffffc000005, which suggest memory corruption. Please download third party called memtestx86, burn it to CD using http://isorecorder.alexfeinman.com/W7.htm, and let it run for at least 7 passes.

Run system file check:
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Do you overclock anything?

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : CLASSPNP.SYS ( CLASSPNP!TransferPktComplete+1ce )

Followup: MachineOwner
---------
BugCheck 1E, {ffffffffc0000005, fffff80002d9885b, 0, ffffffffffffffff}

Probably caused by : fileinfo.sys ( fileinfo!FIPfInterfaceClose+48 )

Followup: MachineOwner
---------
BugCheck A, {fffffa7fffffffd0, 2, 1, fffff80002ad41e3}

Probably caused by : memory_corruption ( nt!MiInsertPageInFreeOrZeroedList+4d3 )

Followup: MachineOwner
---------
BugCheck 1E, {0, 0, 0, 0}

Probably caused by : CLASSPNP.SYS ( CLASSPNP!TransferPktComplete+1ce )

Followup: MachineOwner
---------
BugCheck 1A, {5002, fffff780c0000000, 724b, ff6e41fffffffe}

Probably caused by : udfs.sys ( udfs!UdfCommonRead+b1b )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff80002bbd90d, fffff88006c2d870, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+53d )

Followup: MachineOwner
---------

Run check disk too:
http://www.sevenforums.com/tutorials/433-disk-check.html

That's some generic things to try

Let us know if you need help

Tuan

 

[neyesice]

thank you for your quick reply. does memtestx86 run on 64bit windows 7? i have 2-2gb kingston ram which was newly bought this week, since i thought it could might as well be my old ram.
already removed my video card since it was showing "display driver stopped responding and has recovered"
its starting to look like my motherboard's busted. it was newly purchased last march. could my processor and or hardisk have something to do with these events?

no overclocking that i know of. i will try out your suggestions thank you.

 

[Davidxtux]

You run it outside of windows. You restart and either boot it from a disc or usb.

 

[neyesice]

You run it outside of windows. You restart and either boot it from a disc or usb.

would it work on a 64bit windows? thanks

 

[Davidxtux]

It doesn't matter which version of windows you are using. You boot it from either disc or usb before windows has loaded.

Burn it to disc or copy to usb. Make sure bios settings are set to boot from either disc or usb before hdd. After restart press f8 and select boot from disc or usb then run it from there.