Solved BSOD playing games and recording

[halppl0x]

Hey it made a dmp file this time. cool. Is there a way to read the file like the way you show it? I'm asking because I'm a comp science major, so this is a bit interesting to me.

 

[Arc]

You have done a clean reinstall very recently. Now update the Chipset too. Apparently it is too old.

    Image name: usbfilter.sys
[COLOR=Red]    Timestamp:        Tue Dec 22 13:56:22 2009[/COLOR] (4B3082AE)

And that is the source of the issue.

BugCheck D5, {fffff98004c5ae40, 0, fffff88004d911aa, 0}

*** WARNING: Unable to verify timestamp for usbfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for usbfilter.sys

Could not read faulting driver name
[COLOR=Red]Probably caused by : usbfilter.sys[/COLOR] ( usbfilter+41aa )

Followup: MachineOwner
---------

You may get the chipset update from Biostar or AMD, wherever you like.

 

[halppl0x]

Ahh okay, thanks.
this one from the manuacturer's website is fine right?

TA970 :: Motherboard :: BIOSTAR

Also, should I update my video driver afterwards, or keep the one you suggested?

 

[Arc]

You need to update the chipset. But if you want, and if it is available, you may update all the drivers including the BIOS.

 

[halppl0x]

Went to the website in my last post, downloaded the chipset for windows 7, and installed the stuff, restarted my computer, tested what I usually do for blue screens, got one.

dmp attached

 

[Arc]

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.

eXtreme Power Supply Calculator - The only power supply calculator trusted by PSU manufacturers and computer enthusiasts
​

Also let us know the wattage of the installed PSU.

Stress test the Graphics Card using Furmark.

Video Card - Stress Test with Furmark
​

Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.
_____________________________________________________

BugCheck 116, {fffffa800a6f8010, fffff88002d45dac, 0, 2}

Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+bdac )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800a6f8010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88002d45dac, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context dependent data.

Debugging Details:
------------------


FAULTING_IP: 
atikmpag+bdac
fffff880`02d45dac 4883ec28        sub     rsp,28h

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT:  1

BUGCHECK_STR:  0x116

PROCESS_NAME:  System

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17336 (debuggers(dbg).150226-1500) amd64fre

STACK_TEXT:  
fffff880`05bf0928 fffff880`03d11134 : 00000000`00000116 fffffa80`0a6f8010 fffff880`02d45dac 00000000`00000000 : nt!KeBugCheckEx
fffff880`05bf0930 fffff880`03d10e3e : fffff880`02d45dac fffffa80`0a6f8010 fffffa80`0b5b8b00 fffffa80`0895e010 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`05bf0970 fffff880`03db8f13 : fffffa80`0a6f8010 00000000`00000000 fffffa80`0b5b8b00 fffffa80`0895e010 : dxgkrnl!TdrIsRecoveryRequired+0x1a2
fffff880`05bf09a0 fffff880`03de2cf1 : fffffa80`ffffffff 00000000`0003efde 00000000`00000000 00000000`00000000 : dxgmms1!VidSchiReportHwHang+0x40b
fffff880`05bf0a80 fffff880`03db42e1 : fffffa80`0895e010 fffffa80`00000008 00000000`0003efde 00000000`00000000 : dxgmms1!VidSchiCheckHwProgress+0x71
fffff880`05bf0ab0 fffff880`03de0ff6 : 00000000`00000000 fffffa80`0a6dad50 00000000`00000080 fffffa80`0895e010 : dxgmms1!VidSchiScheduleCommandToRun+0x1e9
fffff880`05bf0bc0 fffff800`0310e456 : 00000000`fffffc32 fffffa80`0a5b4b50 fffffa80`069dbb10 fffffa80`0a5b4b50 : dxgmms1!VidSchiWorkerThread+0xba
fffff880`05bf0c00 fffff800`02e662c6 : fffff880`030a5180 fffffa80`0a5b4b50 fffff880`030b0040 fffffa80`0916ee20 : nt!PspSystemThreadStartup+0x5a
fffff880`05bf0c40 00000000`00000000 : fffff880`05bf1000 fffff880`05beb000 fffff880`0c22dd40 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  .bugcheck ; kb

FOLLOWUP_IP: 
atikmpag+bdac
fffff880`02d45dac 4883ec28        sub     rsp,28h

SYMBOL_NAME:  atikmpag+bdac

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: atikmpag

IMAGE_NAME:  atikmpag.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  53507abb

FAILURE_BUCKET_ID:  X64_0x116_IMAGE_atikmpag.sys

BUCKET_ID:  X64_0x116_IMAGE_atikmpag.sys

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0x116_image_atikmpag.sys

FAILURE_ID_HASH:  {83e844bc-fe68-2042-4230-7f5d3e90b48a}

Followup: MachineOwner
---------

2: kd> lmvm atikmpag
start             end                 module name
fffff880`02d3a000 fffff880`02ddd000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Fri Apr 18 06:37:07 2014 (53507ABB)
    CheckSum:         000A6939
    ImageSize:        000A3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

 

[halppl0x]

http://speccy.piriform.com/results/RA68TGkZF60kWmmcJkl4pWH

I have a 500 watt PSU

LEPA N Series N500-SA 500W ATX12V Power Supply - Newegg.com

Not sure if I did the video card right.

Pics of what I tried on extreme power supply calculator.

It was too long so I put it in 2 pics. Will post furmark in a bit.

 

[halppl0x]

furmark attached, no artifacting or bsod. my mouse had some latency. Mouse has some latency

 

[Arc]

Try the latest graphics driver from Download Drivers ... see how it goes.

 

[halppl0x]

That was the driver I had installed before you gave me the other version to use. Got a bluescreen.

dmp attached.

 

[Arc]

Now try any other graphics card there (you can borrow it from friends or family), or even if your board has an option for the onboard graphics, try it too. See if it causing the same BSOD with a different card or not.

 

[halppl0x]

Almost finished?

Okay, so I am using a Nvidia GeForce GTX 275 card, updated the driver using the manufacturer's website, the website minimum requirements are 550 watts, but my computer can still use it okay, however, for higher quality.it heats up really fast, and uses more power, so then it stops working and reboots itself I think. My computer will say my video driver crashed but restarted itself. I cannot use this video card with my current hardware, but it does not blue screen my computer.

Also, I tried the furmark on it, it runs to 100 degrees in about 20 seconds, I dusted it, I dusted my computer, so either the card's fans aren't getting enough power, or the card just isn't good at cooling itself down.

Can you fix the blue screens with my other graphics card, or do I have to get it replaced?

 

[Arc]

Okay, so I am using a Nvidia GeForce GTX 275 card, updated the driver using the manufacturer's website, the website minimum requirements are 550 watts, but my computer can still use it okay, however, for higher quality.it heats up really fast, and uses more power, so then it stops working and reboots itself I think. My computer will say my video driver crashed but restarted itself. I cannot use this video card with my current hardware, but it does not blue screen my computer.

Also, I tried the furmark on it, it runs to 100 degrees in about 20 seconds, I dusted it, I dusted my computer, so either the card's fans aren't getting enough power, or the card just isn't good at cooling itself down.

Can you fix the blue screens with my other graphics card, or do I have to get it replaced?

You should not use a GTX card if your power supply is less than 550 watts. GTX cards, in most of the cases require direct power source for PCIe from the PSU as shown in the picture below.

View attachment 364727
​

And the cable usually not present in the PSUs less than 550 watts.

Without it, it will be harmful for both the card and the computer.

 

[halppl0x]

Yes, my PSU has a direct cable to it, but regardless the computer hasn't blue screened with this card, so I will be switching back because of hardware reasons.

Again, is the only solution to replace the graphics card? If so, I'll mark this thread as solved.

 

[Arc]

As far as I am seeing, you need to replace the card.

 

[halppl0x]

Alrighty, thanks so much for helping me diagnose my computer!