BSOD while playing, ntoskrnl.exe

[catch22]

Just now, while playing BF3.exe (always god damned BF3)..

 

[x BlueRobot]

[COLOR="Red"]BugCheck 3B[/COLOR], {c0000005, fffff80002af0980, fffff8800a0d16b0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KeClearEvent+0 )

Usual causes:  System service, Device driver, graphics driver, memory

This bugcheck can also be due to page pool errors, graphics card and malware.

0: kd> [COLOR="SeaGreen"]!error 00000000c0000005[/COLOR]
Error code: (NTSTATUS) [COLOR="Red"]0xc0000005[/COLOR] (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

Please run the following tests for your graphics card:

Graphics Card:

• http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

:warn:Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

Use the following program to monitor your hardware temperatures during the stress test:

• CPUID HWMonitor

Test the Power Supply/Video RAM -

• http://www.sevenforums.com/tutorials/160729-nvidia-amd-video-card-test-occt.html

 

[catch22]

I get 88 degrees on the power supply test, no errors in memory with the OCCT (10 passes). Ran for 15 minutes, as it was quote: "very intensive on power supply".. posted pics with the diagrams.. Looks good. I've stresstested with Furmark before, similar results ~ 88-89 degrees C ..


The GTX680 I have is a non overclock, reference design..

 

[catch22]

Also, yesternight I tried playing around some with the voltages of memory and the vcore of the CPU, first I tried increasing RAM voltages from 1.5v to 1.65, made me crash into Windows after 5 minutes of play. Removed SpeedStep and some other intel setting on the mobo, aswell as increasing vcore with .01 volts, after some reading on a different forum. After that I could play uninterrupted for the rest of the night. I will get into a game now and see what happens.

 

[x BlueRobot]

Did you change the DRAM voltage settings? The highest recommend value is 1.6v and no higher.

 

[catch22]

Yes, but switched back since it was no good.. they are now back at 1.5v

 

[x BlueRobot]

What is your PSU brand? You could try increasing the VccSA and VccIO voltages slightly to about 1.100v and then the DRAM voltages to about 1.550v.

 

[catch22]

I have a Fractal Design Tesla,650W..

 

[x BlueRobot]

• GeForce GTX 680 | Specifications | GeForce

Change the voltages and then report back the results.

 

[catch22]

well I haven't had any crash since vcore increase.. Do you think I still should increase vccIO/SA + DRAM?
also, I'm not sure what you mean with the nvidia specs?

 

[x BlueRobot]

I just posted just in case anyone else, posts later in this thread, and leave the voltages for now. Use your system as you normally would and then report back the results.

 

[catch22]

Two in a row, while computer was booted up and idle. I was not at the computer at the time being.. This might relate to settings on the BIOS. I see that the referenced address was the same in both crashes.. Should i increase vccio and vccsa?

 

[x BlueRobot]

[COLOR="Red"]BugCheck 3B[/COLOR], {c0000005, fffff80002d5c30e, fffff88008d185e0, 0}

Probably caused by : ntkrnlmp.exe ( nt!CmpKcbCacheLookup+1de )

Usual causes:  System service, Device driver, graphics driver, memory

Update to the latest graphics driver, even if these drivers are beta, then increase the voltages to the recommend values in my last post.

 

[catch22]

I switched to running OS off of another SSD aswell, will get the newest drivers aswell.

 

[catch22]

Crashed today too, while computer was idle. It's weird, it never happens when I'm using it..


Will reset BIOS and memory, also downclock DRAM to 1333mhz for now

 

[x BlueRobot]

[COLOR="Red"]BugCheck 50[/COLOR], {fffff6d8b00001c0, 0, fffff80002aa2501, 5}

Could not read faulting driver name
Probably caused by : [COLOR="red"]memory_corruption[/COLOR] ( nt!MiDispatchFault+d1 )

Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:

• http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

:info: Additional Help - http://www.sevenforums.com/crash-lo...-driver-verifier-identify-issues-drivers.html

Run the Intel CPU test:

• http://www.sevenforums.com/tutorials/220743-cpu-stress-test-using-intelburntest.html

Check for any file system errors and bad sectors using Option #2 of:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Use this command with Disk Check:

chkdsk C: /f /r

 

[catch22]

Hey Blue. Another bluescreen while I was away and computer was idle.. The computer had gone into a bootloop of sorts and BIOS had put a hold on it. I came home and computer was off thinking it had crashed and shut itself down, but weird part is, it shouldn't turn itself off. It should just boot into windows again right?

So I tried pushing the power button and it wouldn't start! I had to shut it off for a couple seconds, then try again and it booted into bios saying something like "boot failed several times" and then some basic info about drives..

So, it might be something with power options? The bluescreen is reported as the same time I managed to get the computer running, or just a minute before.. This is weird..

All bios settings are normal and latest Geforce drivers... Please Advise!

 

[x BlueRobot]

[COLOR="Red"]BugCheck 3B[/COLOR], {[COLOR="blue"]c000001d[/COLOR], fffff880016318ad, fffff88003fd0c50, 0}

Probably caused by : [COLOR="red"]memory_corruption[/COLOR]

0: kd> [COLOR="SeaGreen"]!error c000001d[/COLOR]
Error code: (NTSTATUS) [COLOR="Blue"]0xc000001d[/COLOR] (3221225501) - {EXCEPTION}  Illegal Instruction  An attempt was made to execute an illegal instruction.

What are the results of the above tests?

 

[catch22]

ChkDisk came back fine, bluescreened today again while away. Computer won't start the first time i push the power button.. It will start up but peripherals won't get any power, screen is black, mouse and keyboard are both black too.

Verifier was on while this happened, so hopefully something..
I am currently setting up Intel Burntest. Will reply

 

[x BlueRobot]

[COLOR="Red"]BugCheck 1A[/COLOR], {888a, fffff9802d126f80, fffff6fcc02f8ec1, fffffa800af1ce50}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+37f50 )

Usual causes:  Device driver, memory, kernel

Have which used the System File Checker (sfc /scannow)?

This bugcheck is usually hardware related, but can be caused by drivers and insufficient hard-drive and RAM space to load the operating system.