Solved BSOD - Windows 7 often for no reason

[panais]

Good news!

And now as you said we must wait,ok then play,work as usual and post back with any results.

Will do

One other thing I forgot to mention was that one of my RAID drives had a Reallocated Sector Count of 3. I'll be keeping an eye on this also. The drive is a couple of years old and not sure when they happened. Only annoyance is I have to the drive from the system to check it in another because HD tune doesn't show any details in windows when they are in RAID.

Oh and still have the problem with not being able to instal SP1..

Run http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html leave it to run overngiht if possible.

Question: Did you ever use driver sweeper?

 

[Magel282]

Good news!

And now as you said we must wait,ok then play,work as usual and post back with any results.

Will do

One other thing I forgot to mention was that one of my RAID drives had a Reallocated Sector Count of 3. I'll be keeping an eye on this also. The drive is a couple of years old and not sure when they happened. Only annoyance is I have to the drive from the system to check it in another because HD tune doesn't show any details in windows when they are in RAID.

Oh and still have the problem with not being able to instal SP1..

Run http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html leave it to run overngiht if possible.

Question: Did you ever use driver sweeper?

I ran the memtest for a couple of passes right after I got the system running again. I haven't had a BSOD since using the different rail either so things look promising.

I use driver sweeper every time I update my graphics driver to make sure it updates properly..

Will I miss out on much by not having SP1 installed? Can I slip stream and repair my installation like last time?

Thanks.

 

[panais]

Sometimes when using in wrong way the driver sweeper you cannot install SP1.

Then you must to use driver sweeper back\restore and restore graphic and again try to install SP1.

 

[Magel282]

Sometimes when using in wrong way the driver sweeper you cannot install SP1.

Then you must to use driver sweeper back\restore and restore graphic and again try to install SP1.

I ended up doing a slipstream and re-installing the OS. Everything has been running fine since I changed over that power cable so hopefully it stays that way.

Thanks for all the help .

 

[panais]

Good news!

You are always welcome!