BSODs After Installing Glary Utilities

[SkeeterVT]

I Installed the free version of Glary Utilities to my computer, a Dell Precision 690 WorkStation desktop (Windows 7 Professional 32-bit, Service Pack 1). I did so to compare it to Advanced SystemCare, which I've had on my computer for more than five years (Currently have PRO Version 7).

After installing GU and running several of its features, I noticed the next morning a Windows message that it had "recovered form an unexpected shutdown" -- meaning a BSOD crash. So I ran WhoCrashed to learn the cause and received the following information:

* * *

[FONT=Segoe UI, Arial]Crash dumps are enabled on your computer.
[/FONT]
[FONT=Segoe UI, Arial]On Thu 6/5/2014 7:26:20 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\060514-87578-01.dmp
This was probably caused by the following module: [FONT=Segoe UI, Arial]ntkrnlpa.exe[/FONT] (nt+0x40B7F)
Bugcheck code: 0xA (0xFFFFFFFF8F082D40, 0x2, 0x0, 0xFFFFFFFF83CA67A4)
Error: [FONT=Segoe UI, Arial]IRQL_NOT_LESS_OR_EQUAL[/FONT]
file path: C:\Windows\system32\ntkrnlpa.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


[/FONT]
[FONT=Segoe UI, Arial]On Thu 6/5/2014 7:26:20 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: [FONT=Segoe UI, Arial]ntkrpamp.exe[/FONT] (nt!Kei386EoiHelper+0x28B7)
Bugcheck code: 0xA (0xFFFFFFFF8F082D40, 0x2, 0x0, 0xFFFFFFFF83CA67A4)
Error: [FONT=Segoe UI, Arial]IRQL_NOT_LESS_OR_EQUAL[/FONT]
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: ntkrpamp.exe .
Google query: [FONT=Segoe UI, Arial]ntkrpamp.exe IRQL_NOT_LESS_OR_EQUAL[/FONT]


[/FONT]
[FONT=Segoe UI, Arial] Conclusion [/FONT]
[FONT=Segoe UI, Arial]2 crash dumps have been found and analyzed. A third party driver has been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:

[FONT=Segoe UI, Arial]ntkrpamp.exe [/FONT]

If no updates for these drivers are available, try searching with Google on the names of these drivers in combination the errors that have been reported for these drivers and include the brand and model name of your computer as well in the query. This often yields interesting results from discussions from users who have been experiencing similar problems.


I've also attached the ZIP file with more crash information.

Has anyone else encountered BSOD crashes with Glary Utilities? And is there a compatibility issue between Glary Utilities and Advanced SystemCare loaded on the same computer?

Your analysis and reply will be greatly appreciated.
[/FONT]

 

[koolkat77]

Welcome to the forum

Since the problem began after installing GU., how about try a system restore before installing the software?

• How to Do a System Restore in Windows 7

 

[Layback Bear]

If you have used Advanced System Care by Iobits you could be in deep do do. Then using Glary Utilities on top of that well, even deeper.

Many have to do a Clean Install to get their computer working properly again.

If restore point doesn't work.

If you decide to do a Clean Install please read these tutorials.

By Brink:
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

By Gregrocker:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html

Window 7 does not need or want such programs as A.S.C. or Glary.

 

[mt12345]

Window 7 does not need or want such programs as A.S.C. or Glary.

because?

 

[Layback Bear]

Because Windows 7 is all ready tuned up. Their are some built in Windows 7 things you can do.
It is not like XP and older systems.

If one wants to optimize Windows 7 here is a tutorial by Brink that has some great suggestions.

http://www.sevenforums.com/tutorials/11728-optimize-windows-7-a.html

 

[mt12345]

Thanks for the link. That's what I've been looking for.

 

[LMiller7]

I don't have a very high opinion of any IOBit products or Glary Utilities. Windows has no need for and will not benefit from such utilities. The fact that Advanced System Care was previously installed (or is currently installed) further complicates things. Such products don't always coexist well and the results are unpredictable.

I would uninstall both and avoid all such programs. Unfortunately the uninstallers may leave behind portions of the programs which may continue to cause problems.

 

[Lady Fitzgerald]

I disagree about Glary Utilities. I've used it for years without any problems and wouldn't be without it. It has a light footprint and won't do any damage. I run the 1-Click Maintenance everyday after running my diagnostic scans (I do have Boot Defrag, Disk Repair, and Tracks Eraser turned off). I also use the Startup Manager and the Uninstall features (the latter being superior to CCleaner for uninstalling programs; I've had problems when using CCleaner and no longer have it on my computer).

 

[mt12345]

the latter being superior to CCleaner for uninstalling programs.

true.

I use glary 2.xx portable

 

[Yrtross]

SkeeterVT, hope you find useful this info:

BSOD cause by ntoskrnl.exe ( nt+66d08 ) according to - Microsoft Community