Solved Code 37 on All Universal Serial Bus ports.

[c0keBLACK]

Yup. No such luck. Drats

 

[PooMan UK]

Pal one thing you could try is a BIOS upgrade *BE VERY CAREFUL WHEN DOING THIS, READ THE DIRECTIONS TO THE T*

WinFlash for HP Notebook System BIOS

 

[c0keBLACK]

I thought about doing this. But then I read this.
This package contains the WinFlash utility and a system BIOS image for the supported notebook models and operating systems. The WinFlash utility is used to locally flash the system BIOS (ROM) on notebooks operating in a Microsoft Windows Vista environment.

Compatibility:Microsoft Windows Vista, Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit), Microsoft Windows Vista (64-bit)

I am running Windows 7 64 Bit. But I will give it a shot.

 

[c0keBLACK]

Okay so..

Updated the BIOS
Updated the Chipset Drivers
Performed SFC /Scannow
Uninstall-ed USB Hardware from Device Manager
Reinstalled USB Hardware from Device Manager

No such luck

 

[c0keBLACK]

I would also like to add that..

My Card Reader Works Fine
Blu Ray/DVD-RW Works fine.
My eSATA port also does not work
I have not tested the HDMI Port
I Have not tested the VGA Port
I Have not tested the Ethernet port
I Have not tested the Dial-up port

 

[thefabe]

This is a very simple thing to try since you've done about everything else, try resetting the CMOS.

Try unplugging the AC adapter and removing the battery for about 5 minutes. Re-install everything then reboot and see if the ports now work.
Fabe

 

[c0keBLACK]

So I tried Resetting the CMOS with no luck as well.

But if it counts for anything. I stuck a thumb drive in my USB port during the start of of the BIOS and it kicked me back with a message telling me to remove the device. The light stayed "on" on the device but I had to remove it to get to the Windows loading screen.

But once Windows loads I lose the USB ports.

 

[c0keBLACK]

Fix Found..

Re Installing Windows 7 fixed the issue!