Computer does not recognize my Seagate external HDD (non-usb)

[sleno]

Now I know that there are a gazillion threads similar to this out there, but I've gone through them and have yet to find a solution.

following this link you can see my computer here

It is a
Medion Akoya X7378
Intel I7-2600 3,4ghz
Windows 7 64GB
6GB DDR

Now my problem is this. I have attached to it a (Lacie) Seagate 250GB that came with the Porsche Design that I wish to plug into one of the slots at the front.

Now I remember when I first bought the com, it worked, but after updating the necessary patches (bios/motherboard/usb/etc.) and all, it stopped working. It has been two years already, but I have yet to figure out how to solve this.

It is not recognized in Windows nor in the Bios and I have set the bios settings to optimized default. I don't really see the drive recognition settings on, but nothing is disabled either.

The drive works fine on USB. I have tested the thing out on other comps, it works, so that couldn't be the problem.

As I am not exactly specialized in this, I'm pretty clueless as to what I could do/check. There are two drives there and it works for neither. It can't be that both drives have a faulty cable, right? I've never touched the inside...

I hope that you guys could help me with this. Let me know if you need any more information. I'd be glad to provide it.

Thanks.

 

[bobafetthotmail]

Can you try the USB on the back? The front ports might not be receiving enough power to use it.

Or do you mean the "2 x hot-swappable wisselframe voor harde schijf" that seem to be hot-swap hard drive bays?

It seems a PC issue, given what you are saying.

 

[Faladu]

Good starting point if it's drivers you need:

LaCie is the premier manufacturer of high quality digital storage.

Troubleshooting help there too, but need the specific model.

Have never used one myself.

 

[sleno]

Can you try the USB on the back? The front ports might not be receiving enough power to use it.

Or do you mean the "2 x hot-swappable wisselframe voor harde schijf" that seem to be hot-swap hard drive bays?

It seems a PC issue, given what you are saying.

that's exactly what i mean. if it's a pc issue, what can i do? :x

 

[bobafetthotmail]

can you try the USB ports on the back of the PC?

 

[sleno]

can you try the USB ports on the back of the PC?

Hi thanks for the suggestion. As I said. As long as I keep it in the casing and plug it into USB, it works. it's just that I want to use the front 2 hot-swaps too, but the comp doesn't recognize the drives.

 

[Faladu]

I suggest you look through the BIOS settings and do some testing, optimized defaults probably did them in, as far as being now totally ignored, if I go optimized defaults, I know I'd have to make at least a dozen adjustments, I hope they are all in my permanent memory.