J JanneM New member Local time 1:46 AM Messages 2 Apr 18, 2011 #1 I was installing win7 ultimate x64 on my laptop. After shutting down for the restart the computer won't turn on any more. Any ideas why this happened? My Computer My Computer At a glance Windows 7 Ultimate x64OSWindows 7 Ultimate x64
I was installing win7 ultimate x64 on my laptop. After shutting down for the restart the computer won't turn on any more. Any ideas why this happened?
theog New member Guru Gold Member VIP Local time 11:46 PM Messages 11,404 Location uk Hampshire Apr 18, 2011 #2 Try clearing your BIOS. Clear CMOS - 3 Ways To Clear the CMOS - Reset BIOS My Computer My Computer At a glance ME/XP/Vista/Win7OSME/XP/Vista/Win7
J JanneM New member Thread Starter Local time 1:46 AM Messages 2 Apr 18, 2011 #3 I cleared my BIOS. Now the machine starts, nut the display won't turn on. My Computer My Computer At a glance Windows 7 Ultimate x64OSWindows 7 Ultimate x64
gregrocker New member Guru Local time 3:46 PM Messages 50,634 Apr 18, 2011 #4 Can you see the BIOS screen when it first boots up? In BIOS setup set SATA controller to AHCI to try install. Try wiping the HD to reinstall as you may have infected code or corrupt boot sector: SSD - HDD Optimize for Windows Reinstallation If this fails, try testing your RAM - Test with Memtest86+, then your HD using maker's diagnostic/repair extended CD scan: HD Diagnostic
Can you see the BIOS screen when it first boots up? In BIOS setup set SATA controller to AHCI to try install. Try wiping the HD to reinstall as you may have infected code or corrupt boot sector: SSD - HDD Optimize for Windows Reinstallation If this fails, try testing your RAM - Test with Memtest86+, then your HD using maker's diagnostic/repair extended CD scan: HD Diagnostic
theog New member Guru Gold Member VIP Local time 11:46 PM Messages 11,404 Location uk Hampshire Apr 19, 2011 #5 Try with a exterial monitor. My Computer My Computer At a glance ME/XP/Vista/Win7OSME/XP/Vista/Win7