Solved Convert Dynamic disk to basic w/o wiping

[Carlos37]

I need to convert a hard drive from dynamic back to basic on a laptop running Windows 7 Home Premium 64bit, but appear not to have the option in Windows unless I delete all the partitions and lose everything on the hdd.

I have partition wizard 5.2 (free version) but it won't allow that function.

I hunted down a copy of 4.2 after reading a previous post that this does have the option but requires free registration, I clicked on the link to do this goes to partition wizard's website but a 404 error is displayed, not allowing me to obtain the free registration code, I suppose this is because 4.2 is no longer supported.

Can anyone help me out of this situation and provide me with the code which was free for a free bit of software?

Failing that how about someone give me an alternative solution or another package that is free and can do the same job.

All advice appreciated, this is somewhat urgent so the sooner the better.

Kind Regards,

Carl.

 

[mikedl]

Hi, Carlos37, welcome to the Seven Forums.

Even if you find a free alternative (there are a few out there) you should back up the data before proceeding else you will risk losing it.

There are many paid disk management utilities available as well but, again, back up the disk first, please.

 

[DeaconFrost]

I believe diskpart will do this as one of the commands, but either way, you would be taking a huge risk by not backing up the data. Given that, I'd rather just move the data off, wipe the drive and create a basic partition, then restore my data. If the data is that important to you, then you should already have a backup plan for it.

 

[Carlos37]

Backup done

Thanks for the advice, but the data is backed up already, the reason for the conversion is it will save a lot of time, wiping the operating system, reinstalling, all the windows updates, all the software programs that will have to go back on, were talking a good 4-5 hours of time.

I agree that the conversion may not work and mess things up but I'm prepared to take that chance, I have nothing to lose and everything to gain in terms of time.

No one has really answered my question, I am aware that paid packages exist, but If I can get something free that does the same job then why pay for a package I'm only ever likely to use this once.

Can anyone provide me with a link to a package I can download that will do the job.

Regards,

Carl.

 

[mikedl]

Hi, again, Carlos37.

I'm not sure how handy you are with a hex editor but HxD, a free hex editor, will allow you to edit Sector 0, offset 01C2, of the drive thereby converting it to a Basic Disk. The following article explains a bit more:

Convert Dynamic Disk back to Basic Disk without data loss
I like to share with you my method. I had a 400gb sata drive and xp wont see the data after install until you add it to Disk Management as a Dynamic Disk because it somehow it became a dynamic disk in the past. I not sure why. For it to be seen as a Basic Disk like all the rest of your drives you have to convert it to Basic but this means you lose all your data so say Microsoft. I didn't want to lose 400gb of data. Haha. So here's a hack to convert it to a Basic Disk without losing any data. It also means i can access the drive in dos properly too. Welcome...

First download this great disk editor - No need to install. HxD - Freeware Hex Editor and Disk Editor | mh-nexus - Will also open disk images.

By default it reads your disks Read Only so goto Extras - Options and untick 'Read Only by Default.

Next goto Extras and select Open Disk and select the right Physical Disk of the drive you want to become Basic Disk...

Link...

Note: Proceed at your own risk! Follow the procedure carefully. DO NOT perform this procedure unless you are familiar with hex editing.

One more caveat:

Find Sector 0 Position 1C2 and verify that it is currently 42. If it is not a 42 make sure you selected the right drive, if you did open the correct disk and it isn’t 42 you might not want to try this. You can always undo this change without causing damage so if you are brave give it a shot anyways.

 

[Carlos37]

Thanks

Thanks again for the advice,

I managed to find a product key off the internet for the free version of Partition Wizard 4.2 which has allowed me to convert it without any problems so far.

I will save the information about the hex editor though for future reference, just in case.

Many Thanks.

Carl.

 

[mikedl]

Glad you got it sorted, Carlos.

 

[alikhan1991]

Thanks again for the advice,

I managed to find a product key off the internet for the free version of Partition Wizard 4.2 which has allowed me to convert it without any problems so far.

I will save the information about the hex editor though for future reference, just in case.

Many Thanks.

Carl.

Hey how did u convert .
I am not able to do that.
To convert from dynamic disk to basic disk one should have two HD using partittion wizard 4.2.2

 

[gregrocker]

Sorry I didn't see this until now.

Use free Partition Wizard bootable CD version 4.2 which is still free: pw422.zip ISO - Windows Live

Highlight the Win7 HD, from Disk tab select Convert to Basic.

Back up your files first. When WIn7 is not bootable you can retrieve your files first to back them up using the Win7 DVD or REpair CD: Copy & Paste - in Windows Recovery Console or free Paragon Rescue CD.

 

[criminalno199]

hey
Carlos37
can you please me send me the product key for partition wizard 4.2
i also got the same problem
and i have been searching the solution finally i got your post here
please help me out with product key
here is my email id
[email protected]

waiting for your reply brother

thnx

 

[alan10]

Why bother with obsolete software ?

You can now download
MiniTool Partition Wizard Bootable CD 7.0

Partition Wizard Bootable CD allows user to boot computer directly to manage partition.

Functions of MiniTool Partition Wizard Bootable CD
MiniTool Partition Wizard Bootable CD has the same features as of MiniTool Partition Wizard Home/Professional Edition. Features include: Move/Resize Partition, Copy Partition, Create Partition, Delete Partition, Format Partition, Convert File System, Hide/Unhide Partition, Explore Partition, Partition Recovery, Convert Dynamic Disk to Basic Disk, Rebuild MBR and much more.

 

[gregrocker]

I gave you the download link for PW 4.2 free edition which is the last version which has Dynamic>Basic conversion for free. There is no key for this freeware.

If you can afford to pay for it then by all means purchase the latest version of PW, which is the most valuable tool we use here and has helped thousands of users since Win7 release.