Dell Computer PC will not load Windows install CD from computer crash

[Chief12]

I have a two year old Dell PC with Windows 7. I got a virus in my computer that by phone and computer takeover Norton located in my MBR. When they cleaned it my computer will no longer boot up. Norton worked with me for three days on the problem but we were unable to fix the computer. I followed other web sites and repaired my MBR but it still will not boot up. I tried System Repair, Check point, Image, and Dell system restore and all failed. I have tried to use the Windows install CD and all I get is a black screen with a flashing cursor and then after 3 minutes the compute attempts to boot again and fails. I tried everything to try and wipe the drive from C prompt and it will not let me. I have very weak computer skills but I can follow directions and I have wiped a previous computer I owned. (I confirmed that my CD drive is working) I also should mention I have a second hard drive on my computer that I backed everything up to.

 

[writhziden]

See if you can reset the BIOS hardware/software connections and then clear the CMOS to access your Windows 7 install disc.

• Resetting hardware/software connections in the BIOS and clearing temporary memory of corruption:
  1. Shut down and turn off the computer.
  2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  3. "Remove the computer from any port replicator or docking station, disconnect
     cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
  4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
     power from components is drained to clear the software connections between the BIOS
     and hardware and clear any corruption in the temporary memory.
  5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
     and mouse should suffice and be the only peripherals reconnected.
  6. Turn it on to reinitialize the software connections between the BIOS and hardware
  
  
• Clear the CMOS:
  1. Use your system manual to find instructions for accessing the BIOS...
  2. In the BIOS, go to the EXIT screen...
  3. Choose load setup/optimized defaults...
  4. Save...
  5. Exit the BIOS...