Solved Different BSODs, Kernel-Power Event 41 Error

[JellyPeanuts]

I bought some new parts for my customized computer, I've added a new PSU, new RAM, new motherboard and new CPU. When I start the computer, it just freezes up, I start it up again, I get many different kinds of BSOD's like:

'AFD.sys'
'netio.sys'
'Page Fault in Non Paged Area'
'dxgmms1.sys'
'BAD_POOL_CALLER'
'ACPI.sys'

'IRQL_NOT_LESS_OR_EQUAL' then it says 'Dumping physical memory to disk: 100'

I've reinstalled my OS, installed the latest updates for Windows 7, installed the latest driver for my video card but it still making me crash. Is there any way to fix this? I've run a Windows Memory Diagnostic Test for both of my RAM, they're all successful, no errors at all. I do not get any CRC errors. I'm worried right now that I have to replace another new motherboard, new RAM or anything else, probably everything I have to replace. I hope someone can help me. Thanks.


AMD Athlon II X3 455 3.3GHz
8GB of RAM DDR2
M4A785-M Motherboard
600WATT ATX PSU
EVGA GTS 450 1GB SuperClocked
300GB SATA Hard Drive

 

[zigzag3143]

I bought some new parts for my customized computer, I've added a new PSU, new RAM, new motherboard and new CPU. When I start the computer, it just freezes up, I start it up again, I get many different kinds of BSOD's like:

'AFD.sys'
'netio.sys'
'Page Fault in Non Paged Area'
'dxgmms1.sys'
'BAD_POOL_CALLER'
'ACPI.sys'

'IRQL_NOT_LESS_OR_EQUAL' then it says 'Dumping physical memory to disk: 100'

I've reinstalled my OS, installed the latest updates for Windows 7, installed the latest driver for my video card but it still making me crash. Is there any way to fix this? I've run a Windows Memory Diagnostic Test for both of my RAM, they're all successful, no errors at all. I do not get any CRC errors. I'm worried right now that I have to replace another new motherboard, new RAM or anything else, probably everything I have to replace. I hope someone can help me. Thanks.


AMD Athlon II X3 455 3.3GHz
8GB of RAM DDR2
M4A785-M Motherboard
600WATT ATX PSU
EVGA GTS 450 1GB SuperClocked
300GB SATA Hard Drive

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.



To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

 

[JellyPeanuts]

I'm afraid I cannot do that. My computer is now not working anymore. When I start up the computer, the computer freezes before Windows 7 starts to load. It tells me that a checksum is corrupted, restarted my computer, now it tells me that a Windows 7 file is corrupted when I just installed a fresh copy earlier. I don't know what to do. I tried restarting the computer using the power button over thirty times, it just freezes after three seconds. One time I restarted the computer, it shows the Motherboard model number, everything turned colourful after. I am on my friend's laptop right now. Sorry.

 

[zigzag3143]

Bump, I got the files. Here.

No dmps included in upload try this method.




To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.



To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

 

[JellyPeanuts]

I got the Minidump file.

 

[zigzag3143]

I got the Minidump file.

Memory corruption probably caused by your asacpi.sys (from 2005)

1-ASACPI.SYS a major cause of BSOD's in the 2005 rev.

The pre 2009 version of this driver is a known BSOD cause.

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).


2- Run memtest

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Let us know the results from the report at the end.

 

[JellyPeanuts]

I've downloaded the file and I checked the ASACPI.sys file and it says it's modified to 2009. Also time stamped to 2009, correct?

 

[JellyPeanuts]

Sorry for double posting. I've got results from the memtest you told me to do. It says:

'Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windir/Logs/CBS/CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

The system file repair will take effect after the next reboot.'

Here is the SFC file results:

 

[zigzag3143]

Sorry for double posting. I've got results from the memtest you told me to do. It says:

'Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windir/Logs/CBS/CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

The system file repair will take effect after the next reboot.'

Here is the SFC file results:

Your DMP dated 7/2 still has the 2005 asacpi.sys (se pix)

 

[JellyPeanuts]

The problem is fixed. It was a faulty CPU and Motherboard.