Solved diskpart/clean by accident....need to recover partitions,begging :'(

[kado897]

The Windows installation allows you to select where to install. Just chose the unallocated 100GB space.

 

[Kaktussoft]

check D and E as well in the recover screen!!

 

[Kaktussoft]

so recover D,E C and system reserved as well. and make system reserved active. all partitions are primary then?

 

[Kaktussoft]

If you do what I told you... disk layout with partitions is the same as prior to clean command. And hopefully the same as the time when making system image (?)

If the layout is not EXACTLY the same you CANNOT restore the system image!!! You can but it will reformat everything so also D and E.

so if you want to restore.... do what I told you

 

[suspect008]

I did follow you exactly you listed. But after mbr rebuilt, ran the recovery and chose 100mb reserved and 100gb, but when I click finish, it came up with the warning in the picture.
Have you seen it?
It says, if I recover, one of existing will be lost. So i didnt? Thatz what Im waiting on, what should I do?

 

[Kaktussoft]

I did follow you exactly you listed. But after mbr rebuilt, ran the recovery and chose 100mb reserved and 100gb, but when I click finish, it came up with the warning in the picture.
Have you seen it?
It says, if I recover, one of existing will be lost. So i didnt? Thatz what Im waiting on, what should I do?

Select the other 2 partitions as well!!

 

[suspect008]

check D and E as well in the recover screen!!

I dont follow you here kaktussoft, what you mean? And how to do this?

 

[suspect008]

I did follow you exactly you listed. But after mbr rebuilt, ran the recovery and chose 100mb reserved and 100gb, but when I click finish, it came up with the warning in the picture.
Have you seen it?
It says, if I recover, one of existing will be lost. So i didnt? Thatz what Im waiting on, what should I do?

Select the other 2 partitions as well!!

Is it okay about that warning?
Which said that I may lose 1 existing partition?

 

[Kaktussoft]

cancel the recovery! Run it again. It shows you "system reserved" C, D and E? Correct?
If so.... check them ALL!!! And recover

 

[suspect008]

and here is a sugestion from me,
Now, there is my D and E without drive letters. And my system image contains only 100mb and C.

So, what if i make this unallocated space partitioned with windows instalation console ( as it make the 100mb system reserved, and 100gb C and mark the system reserved as active automatically),

And then if its possible to acces these recovered partions with macrium rescue disk, I may get my image restored or if its not, i dont care, I can reinstall, its not a problem.

Thing im afraid is, what does this status 'none' means? And if I re install windows(on newly allocated C), would these two partitions be able to use readily? Wil windows recognize it as formated and data contain readily available partition?

 

[suspect008]

cancel the recovery! Run it again. It shows you "system reserved" C, D and E? Correct?
If so.... check them ALL!!! And recover

Please take a look at my sugestion above and give a opinion. Cuz thats also the same as the partition table when I make the image. Or even to re install windows.

 

[Kaktussoft]

and here is a sugestion from me,
Now, there is my D and E without drive letters. And my system image contains only 100mb and C.

So, what if i make this unallocated space partitioned with windows instalation console ( as it make the 100mb system reserved, and 100gb C and mark the system reserved as active automatically),

And then if its possible to acces these recovered partions with macrium rescue disk, I may get my image restored or if its not, i dont care, I can reinstall, its not a problem.

Thing im afraid is, what does this status 'none' means? And if I re install windows(on newly allocated C), would these two partitions be able to use readily? Wil windows recognize it as formated and data contain readily available partition?

Drive letters is a windows thing!! Can be different when starting from dvd , win7 on disk, or vista on disk... It measn nothing for !! forget drive lettering now!

Did you make system image using standard win7 system image backup or macrium backup???

 

[suspect008]

[/QUOTE]
Drive letters is a windows thing!! Can be different when starting from dvd , win7 on disk, or vista on disk... It measn nothing for !! forget drive lettering now!

Did you make system image using standard win7 system image backup or macrium backup???[/QUOTE]

Its macrium. And I have the profesional edition rescue disk.

 

[suspect008]

so, shal I go with windows partition making or recover all at once from recovery wizard and put my image back? I have little confidence now that what so happen, i may get a copy of my data. Cuz they exist

 

[Kaktussoft]

you didn't tell me before it was macrium!! Macrium is very flexible. Buth i don't know exactly how it works. Will give you some links later

Recovering system reserved and C (in PW) isn't needed when using macrium.

D and E are still recovered on disk? sysreserved and C are not in the list?

 

[suspect008]

you didn't tell me before it was macrium!! Macrium is very flexible. Buth i don't know exactly how it works. Will give you some links later

Recovering system reserved and C (in PW) isn't needed when using macrium.

D and E are still recovered on disk? sysreserved and C are not in the list?

I did tel, i did mentioned one or two times like image with macrium and marium rescue cd

Yes, D and E are recovered
(E : shows used 203gb, size 296gb, NTFS, Primary, STATUS - NONE)
(D : shows used 53gb, size 200gb, NTFS, Primary, STATUS - NONE)

And 100gb unallocated. Can you please tel me what this status NONE means? Is it mean active or not?
But I stil think I should make sys reserved and C with windows partition console in the dvd and then boot with macrium and restore.

 

[Kaktussoft]

so, shal I go with windows partition making or recover all at once from recovery wizard and put my image back? I have little confidence now that what so happen, i may get a copy of my data. Cuz they exist

Recover only D and E with Partition Wizard.

Then you may chose yourself what to do. Reinstall WIN7 in the unallocated space, or use macrium to restore the 2 partitions.

 

[Kaktussoft]

you didn't tell me before it was macrium!! Macrium is very flexible. Buth i don't know exactly how it works. Will give you some links later

Recovering system reserved and C (in PW) isn't needed when using macrium.

D and E are still recovered on disk? sysreserved and C are not in the list?

I did tel, i did mentioned one or two times like image with macrium and marium rescue cd

Yes, D and E are recovered
(E : shows used 203gb, size 296gb, NTFS, Primary, STATUS - NONE)
(D : shows used 53gb, size 200gb, NTFS, Primary, STATUS - NONE)

And 100gb unallocated. Can you please tel me what this status NONE means? Is it mean active or not?
But I stil think I should make sys reserved and C with windows partition console in the dvd and then boot with macrium and restore.

status NONE means no specific status. It could be BOOT (called SYSTEM in win7) if partition has been flagged ACTIVE. So you boot from that partition

It could be SYSTEM (called BOOT in win7) if the partition has the current running Operating system.

 

[Kaktussoft]

no need to create system reserved and C with partition wizard.
Macrium restores those two partitions for you. Give it a try

 

[suspect008]

okay, here what Im going to do, i boot with 7 installation disk and from its partitioning console, i will make my C and system reserved and format both again.

Then cancel the instalation and boot with macrium, and if I CAN SEE MY D and E, i may get my image restored. I suppose this is okay. And i have one last thing to ask, I wil do it when I get to use my note again hope its near. Until then, i wil post if any discripancy occurs. Thank you all and especialy you kaktussoft.