Fresh Windows 7 Professional, x64 install boot problem

[mester1987]

After fresh installed Windows 7 Professional x64 the primary drive, the boot is not completed when the secondary drive is not attached.

I need the solution.

When is installed, the secondary boot disk is attached.

The 1. drive is SSD, i need the solution to work without 2. HDD to boot the system.

 

[SIW2]

if you are using mbr partitioning and assuming your new installation calls itself C:

Open admin command prompt:
diskpart
sel vol c
act
exi
bcdboot c:\windows /s c:

Then you should be able to boot without the other disk attached.

 

[mester1987]

if you are using mbr partitioning and assuming your new installation calls itself C:

Open admin command prompt:
diskpart
sel vol c
act
exi
bcdboot c:\windows /s c:

Then you should be able to boot without the other disk attached.

Other option is available?

Running all command and restart and nothing change.

"Reboot and select proper boot device"

 

[SIW2]

post a screenshot of disk management window.

 

[wither 2]

I may be naive but, can you do the new install without the other drive installed?