I have just changed my system from a large case to a matx case, but used all the part except the mainboard. Changed from a Asus P6T Deluxe to a Asus Rampage Gene II.
Now I thought I might have to reinstall windows, but as luck would have it, it booted straight into windows with no other problem except I had to register windows.
It was only when I tried plugging in a usb memory stick into the front of the case that I got a bsod. If I plug it into one of the back usb ports it works. So I checked to see if the cable was attached correctly on the internal header and again it was.
So could this be down to windows or a hardware problem?
Now I thought I might have to reinstall windows, but as luck would have it, it booted straight into windows with no other problem except I had to register windows.
It was only when I tried plugging in a usb memory stick into the front of the case that I got a bsod. If I plug it into one of the back usb ports it works. So I checked to see if the cable was attached correctly on the internal header and again it was.
So could this be down to windows or a hardware problem?
My Computer
- Computer Manufacturer/Model Number
- Qmicra II Custom build
- OS
- Windoze Se7en Profesional x64
- CPU
- i7 920
- Motherboard
- Asus Rampage II Gene
- Memory
- Corsair 3x2gb xms3 TR3X6G1333C9
- Graphics Card(s)
- Gigabyte radeon 4870 1Gb
- Monitor(s) Displays
- Dell 24" U2412M
- Screen Resolution
- 1920x1200
- Hard Drives
- 4 Samsung Spinpoint F3 1Tb
- PSU
- Be Quiet Dark Power Pro Modular 750w
- Case
- Qmicra Qv2E matx
- Cooling
- Noctua NH-U12P SE1366 + Noctua NF-S12's
- Keyboard
- Logitech diNovo Edge
- Mouse
- Logitech Performance MX
- Internet Speed
- 16Mb LLU
- Other Info
- Scythe Kaze Master Ace Fan Controller
it might be just the connector, but it might be the whole usb port ?
