Internet not working and ipconfig problem

[Nate123]

Hi windows 7 said I am connected to the Internet but I have limited activity. I've tried tons of things and nothing seemed to work. I even tried to reset winsock, didn't work. I did tons of things and nothing so I decided to create a help thread to see if anyone can assist me. Help is needed and greatly appreciated.

When I do ipconfig /renew and release I get

"The operation failed as no adaptor is in the state permissible for this operation,"

Also I get this when I do ipconfig /all

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Seebarran1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\windows\system32>

 

[richnrockville]

Nate123, it looks like your ethernet adapter is not active. You might want to check devices to see if you need the driver for your ethernet card installed?
under properties of my computer, devices and see if your ethernet card is showing up as valid.

Rich

 

[Nate123]

Checked device manager and all adapters are there

 

[richnrockville]

Nate, and they don't show that they are not functioning?

Also. you do have an ethernet cable attached and active?

Sometimes, just removing the driver and then rebooting will allow it to be found and activated.

or it could have the power turned off via the system software turning it off for non-use.
Rich