Keyboard no power during windows resume loader.

mikeekimy

New member
Local time
5:42 PM
Messages
1
Had a storm last night. Desktop was sleeping. Woke up this morning to windows resume loader. No time out on this menu for some extremely idiotic reason. USB keyboard has no power. Tried with a USB to PS/2 adapter and still no power. Tried another keyboard, didn't work neither. There's power on my USB rails for sure as I have tried plugging in headphones and they work. Can't even get into BIOS because keyboard just doesn't work. Currently resetting my BIOS.

Has anyone had this problem before?
 

My Computer My Computer

OS
windows 7 proffesional
I ran into something similar, after some new hardware additions and reconnecting all my usb peripherals. I found that my keyboard wasn't working at boot up to allow me into my BIOS. What I found out was that the usb PCI card I have installed, is where I inadvertently plugged in my usb keyboard. The keyboard didn't get power until the usb PCI card got power then my keyboard would work. So I plugged the usb keyboard into mobo usb slots and bingo bango, keyboard was working properly and I had access to my BIOS.
 

My Computer My Computer

Computer Manufacturer/Model Number
Custom built
OS
Windows 7 Ultimate 64 bit
CPU
AMD Phenom II X4 965 Black Edition
Motherboard
Gigabyte GA-MA790X-DS4
Memory
GSkill 4 X 2 GB PC 8500
Graphics Card(s)
XFX Radeon HD 6790 D
Sound Card
On board RealTek HD
Monitor(s) Displays
Dual monitors:Samsung SyncMaster S20B300
Screen Resolution
1600 X 900
Hard Drives
Seagate Barracuda 1TB (primary)
Seagate Barracuda 2 X 320 GB
PSU
Ultra X4 750 watt fully modular
Case
Thermaltake Overseer RX 1 full tower
Cooling
Core-Contact 92 mm CPU Cooler
Keyboard
Logitech G510
Mouse
Razor DeathAdder
Internet Speed
50/5 Mbps UL/DL
Other Info
Optical: Super Muliti DVD burner w/lightscribe, Hauppauge WinTV HVR-1800
In the early part of the boot process, where the BIOS still has control before handing over to the OS routines, USB functionality is enabled through the Legacy USB Support option in the BIOS. Normally, this is enabled by default in most BIOSes, but if it becomes disabled (either intentionally or through other means such as electrical transients that can occur during severe electrical storms), then it can give rise to this sort of problem. Resetting the BIOS should, hopefully, solve the problem. You might, however, need to both remove the battery AND use the motherboard jumper to reset it fully.
 

My Computer My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Dwarf Dwf/11/2012 r09/2013
OS
Windows 8.1 Pro RTM x64
CPU
Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.4GHz)
Motherboard
ASRock Z77 Extreme4-M
Memory
4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
Graphics Card(s)
MSI GeForce GTX770 Gaming OC 2GB
Sound Card
Realtek High Definition on board solution (ALC 898)
Monitor(s) Displays
ViewSonic VA1912w Widescreen (VGA)
Screen Resolution
1440x900
Hard Drives
OCZ Agility 3 SSD 120GB SATA III x2 (RAID 0)
Samsung HD501LJ 500GB SATA II x2
Hitachi HDS721010CLA332 1TB SATA II
Iomega 1.5TB Ext USB 2.0
WD 2.0TB Ext USB 3.0
PSU
XFX Pro Series 850W Semi-Modular
Case
Gigabyte IF233
Cooling
1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
Keyboard
Microsoft Comfort Curve Keyboard 3000 (USB)
Mouse
Microsoft Comfort Mouse 3000 for Business (USB)
Internet Speed
NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
Antivirus
Avast! 8.0.1497
Browser
IE 11
Other Info
Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
Lexmark S305 Printer/Scanner/Copier (USB)
WEI Score: 8.1/8.1/8.5/8.5/8.25
Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)
Back
Top