0rbytel
New member
Hey guys,
Hoping you can help me again.
I'm trying to setup videos to play as screensavers, and have downloaded the Microsoft Video Screensaver (International Edition), but have run into a problem (I've had this issue before with validation, and requiring me to manually enter in my product key).
Anyway, I had to download the WGA before it would allow me to download, which I did and all was fine.
I then downloaded the videoscreensaver.msi and accepted, and every time it stops during what seems to be confirmation of validation. It pops up the following page:
http://go.microsoft.com/fwlink/?linkid=33171&LegitCheckError=6
With the error message from the installer:
"Installation Interrupted
the installation was interrupted before Microsoft Video Screensaver could be installed. You need to restart the installer to try again."
I've had issues from the word go with activation, where I had to do it via phone, as it wouldn't allow me to activate over the net.
My version is 100% legit, and is an OEM upgrade disk that I received for my laptop, and it just doesn't want to work for me.
Any suggestions? I've disabled windows firewall, and virus scanners, enabled the DMZ for the static IP assigned to the pc that I'm trying to install it on, and it just doesn't want to work.
Any help would be appreciated.
cheers
Hoping you can help me again.
I'm trying to setup videos to play as screensavers, and have downloaded the Microsoft Video Screensaver (International Edition), but have run into a problem (I've had this issue before with validation, and requiring me to manually enter in my product key).
Anyway, I had to download the WGA before it would allow me to download, which I did and all was fine.
I then downloaded the videoscreensaver.msi and accepted, and every time it stops during what seems to be confirmation of validation. It pops up the following page:
http://go.microsoft.com/fwlink/?linkid=33171&LegitCheckError=6
With the error message from the installer:
"Installation Interrupted
the installation was interrupted before Microsoft Video Screensaver could be installed. You need to restart the installer to try again."
I've had issues from the word go with activation, where I had to do it via phone, as it wouldn't allow me to activate over the net.
My version is 100% legit, and is an OEM upgrade disk that I received for my laptop, and it just doesn't want to work for me.
Any suggestions? I've disabled windows firewall, and virus scanners, enabled the DMZ for the static IP assigned to the pc that I'm trying to install it on, and it just doesn't want to work.
Any help would be appreciated.
cheers
My Computer
- OS
- Windows 7 Professional 64-bit
- CPU
- Intel i5 750 @ 2.8GHz
- Motherboard
- GA-P55M-UD2
- Memory
- 4GB (2x 2GB) Geil DDR3 PC3-12800 Ram CL=9-9-9-28
- Graphics Card(s)
- ATI Sapphire HD 5770
- Sound Card
- Realtek HD Audio
- Monitor(s) Displays
- Viewsonic VS2233wm-3
- Screen Resolution
- 1920 X 1080
- Hard Drives
- OCZ 128gb Vertex SSD (Primary)
1TB WD 7200 SATA2 Caviar
500GB ST3500320AS ATA
500GB Seagate Freeagent External
- PSU
- Thermaltake Key 3 Spirit 600w Toughpower
- Case
- Antec Nine Hundred Two
- Cooling
- Stock Intel HSF; Thermaltake HDD Coolmaster; Deep Cool SF
- Keyboard
- Logitech Media 600
- Mouse
- Microsoft Habu Gamer Mouse
- Internet Speed
- ADSL 2+ 12G/800Mb