My 10" touchscreen wount work with 7

[Plecto]

Hi. I'm having some problems here. My regular 20" LCD screen works just fine, but for some reason my 10" touchscreen wount seem to work. The message "out of range" appears so I guess my windows 7 is sending some signals which the screen cant interpret. The touchscreen works fine with the same VGA cable on any windows XP machine.

 

[brianzion]

hello and welcome The Touch Pack comes preinstalled on some multitouch PCs running Windows 7, but it isn't included in Windows 7. The Touch Pack is available for download from :ar: http://www.microsoft.com/downloads/...dd-82e4-4ddb-a46a-aebe49944428&displaylang=en
Windows Touch - Discover Windows - Microsoft Windows

System Requirements
Supported Operating Systems:Windows 7 Home Premium;Windows 7 Home Premium 64-bit;Windows 7 Home Premium E 64-bit;Windows 7 Home Premium N;Windows 7 Home Premium N 64-bit;Windows 7 Professional;Windows 7 Professional 64-bit;Windows 7 Professional E 64-bit;Windows 7 Professional N;Windows 7 Professional N 64-bit;Windows 7 Ultimate;Windows 7 Ultimate 64-bit;Windows 7 Ultimate E 64-bit;Windows 7 Ultimate N;Windows 7 Ultimate N 64-bit
Genuine Microsoft® Windows® 7 Home Premium, Professional or Ultimate

Touch Pack System Requirements:

1. A computer or monitor that supports Windows Touch (at least 2 touch input support required)

2. PC with 1.3 GHz or higher processor

3. 1 GB of system RAM

4. 600 MB available hard disk space

5. 128 MB 3D video card with Hardware Textures & Lighting

6. DirectX 9.0 or later capable video card

7. Internet access required for Microsoft Surface Globe

8. Sound card, speakers or headphones required for audio

 

[Plecto]

I'm sorry, I wasn't presise enough The actual touch function works just fine, it's just that the display is black. The touch funcion seem to work independently of the display, even when the screen seem to have shut itself off beacuse of no signal input, the touch function still works.

 

[Plecto]

Bump

 

[brianzion]

hello sorry i am stuck for answers at the moment i don't use touch screens i was hoping another user would pick up on the thread for you :banghead:

 

[Plecto]

But does it really have to do with this beeing a touchscreen? As I said, the touch function and the actual viewing function seem to be completely separate. This is then just a regular 10" LCD screen that wount work.

 

[brianzion]

post your system specs here is a good program for that called speccy Speccy - Download

 

[Plecto]

Sure.

OS: Windows 7 ultimate 64bit
CPU: Intel Pentium E2200
RAM: 4GB 335Mhz DDR2
MB: Asus P5QL-EM
Graphics: Nvidia Geforce GT 220
Harddrives:
60GB SSD
1TB Seagate S-ata
500GB Seagate S-ata

 

[brianzion]

Drivers - Download NVIDIA Drivers
check the link above and see if you have updates for your card

 

[Plecto]

The graphics card driver has been installed several times, I believe I've tried different versions aswell along with the control panel client.

 

[brianzion]

NVIDIA DRIVERS 260.99 WHQL

 

[brianzion]

Q. Monitor Out of Range What is this?
A. It means your system display card settings are too high for your monitor. Boot your system into safe mode and set the display settings lower

http://support.microsoft.com/kb/315614

 

[Plecto]

Thanks Safe mode did the trick. So what kind of setting do I have to change in order to make it work without safe mode? The refresh rate is set to 60hz, there is no other options in the list.

 

[brianzion]

that should of changed it for normal run ?

 

[Plecto]

that should of changed it for normal run ?

What do you mean?

 

[brianzion]

have you run it out of safe mode since the changed settings?

 

[Plecto]

Well, I havent changed any settings. I just ran the computer in safe mode, successfully tested the screen and then booted it back up in normal mode. But the screen dosn't work now either after I booted it back up.

 

[brianzion]

go back to safe mode and change the screen settings Change screen resolution

 

[Plecto]

Couldnt I just change the resolution in normal mode? I have tried that by the way, no resolution seem to work.

 

[brianzion]

well in safe mode i just realized it uses the on-board graphics not the card it must be the card settings. in normal desktop can you right click on the screen and in the context menu has it got settings for the nvidia card?