new build issues

[timeless]

just finished my new build but having problems.

the problem is pretty simple, firstly lm getting no display and the system seems to be power cycling. basically l press the power button everything powers, cpu fan seems to be spinning, everything seems to be powering up then after a few seconds it powers down then back on again (it will continue until l turn off the PSU switch), just wondering if lve missed anything because l cant think of what the problem could be.

by the way this is the board lm using: Gigabyte GA-Z87-D3HP Socket 1150 DVI HDMI 7.1 Channel Audio ATX Motherboard - Ebuyer

 

[N00berG00ber]

reseat the CPU, RAM, and GPU (if u have one).

 

[timeless]

turns out it was a ram issue, the smaller profile ram was harder to see if it was clipped in properly.

only issue l have now is for some reason the wireless keeps on stalling but lm not sure if its the firewall at the second. still investigating.. as it sort of comes and goes.

 

[N00berG00ber]

Update the drivers for the Wi-Fi module.

 

[timeless]

lve updated the driver (its a Tenda W326U, v2.0 havent found any mention of differences) hasnt really changed a whole lot tho it does seem to be holding the connection better but lm still getting annoying fluctuations.

 

[N00berG00ber]

lve updated the driver (its a Tenda W326U, v2.0 havent found any mention of differences) hasnt really changed a whole lot tho it does seem to be holding the connection better but lm still getting annoying fluctuations.

check to see thats both the router an the adapter are using WPA-2 security, make sure its using 2.4GHz "G" connection, and make sure its set at 20MHz or 20/40MHz. are any other devices disconnecting?

 

[timeless]

my laptop is connecting fine with no issues.. in fact this same adapter was fine up till this build.. tho its somewhat more stable than it was now.

on another note, can someone recommend a good temp monitor.. l like to keep an eye on CPU temps but the update for one of the motherboards apps seems to have gotten rid of the page where l could see the temps.

 

[ignatzatsonic]

can someone recommend a good temp monitor.. l like to keep an eye on CPU temps but the update for one of the motherboards apps seems to have gotten rid of the page where l could see the temps.

I use HWinfo; it shows temps, voltages, fan speeds, etc.

HWiNFO, HWiNFO32/64 - Download

 

[AddRAM]

Core Temp

 

[timeless]

found HWmonitor which seems to do the job, tho l did try intels version as well.