Please help I have no idea

[jayw09]

Okay so I'm only 16 and really need help. I know quite alot about pcs and the BIOS and stuff like that but I have no idea how to fix this. I was on my pc then suddenly a blue screen came up and said dumping physical memory and then went to 100 and restarted and everytime I booted the pc up it did this right away and kept restarting. I just assumed I had a virus and reformatted the pc. However once I reformat it and the pc restarts an error message comes up saying windows setup could not configure on this hardware. I have tried alot of things including changing my SATA mode. Please help I do not know what to try

 

[HarriePateman]

We could help you over in the BSOD Thread.

Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

 

[krustykobb]

try running windows startup repair to see if that can fix the issue

 

[jayw09]

try running windows startup repair to see if that can fix the issue

I cant because every time I load it up now it just gets to the part where it says starting windows then tells me that windows didnt launch and prompts me to start a full destructive recovery and i have done about 4 full recoveries now with no luck what so ever

 

[jayw09]

We could help you over in the BSOD Thread.

Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

But I cannot use this method as i cannot fully boot up the bc so i cant open or run files

 

[HarriePateman]

Can you access safe mode (F8)

 

[jayw09]

Can you access safe mode (F8)

Yes but it still prompts me to do a full recovery when i go into safe mode

 

[krustykobb]

try running windows startup repair to see if that can fix the issue

I cant because every time I load it up now it just gets to the part where it says starting windows then tells me that windows didnt launch and prompts me to start a full destructive recovery and i have done about 4 full recoveries now with no luck what so ever

Try putting in your Windows 7 CD/DVD and run startup repair from that

 

[jayw09]

try running windows startup repair to see if that can fix the issue

I cant because every time I load it up now it just gets to the part where it says starting windows then tells me that windows didnt launch and prompts me to start a full destructive recovery and i have done about 4 full recoveries now with no luck what so ever

Try putting in your Windows 7 CD/DVD and run startup repair from that

Okay good idea Ill try it now ill report back soon

 

[Yard Dog]

Hello.. give this a looking over.. it may help you. : http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

 

[jayw09]

I cant because every time I load it up now it just gets to the part where it says starting windows then tells me that windows didnt launch and prompts me to start a full destructive recovery and i have done about 4 full recoveries now with no luck what so ever

Try putting in your Windows 7 CD/DVD and run startup repair from that

Okay good idea Ill try it now ill report back soon

Still no luck it said it found an error then restarted so i tried booting the pc again but it still prompted me to do a detructive recovery. however it did recover windows 7 home premimum but it didnt work

 

[HarriePateman]

Do you have any system restore points?

Make sure all cables are in correctly and components are free of dust.

 

[krustykobb]

you could try running 'sfc /scannow' from the windows installation disk to see if that throws up any problems (you run that command in the command prompt)

 

[jayw09]

Do you have any system restore points?

Make sure all cables are in correctly and components are free of dust.

No and yes everything is all plugged in okay

 

[jayw09]

you could try running 'sfc /scannow' from the windows installation disk to see if that throws up any problems (you run that command in the command prompt)

Okay ill try now thanks

 

[HarriePateman]

okay, are you overclocked?

 

[krustykobb]

you could try running 'sfc /scannow' from the windows installation disk to see if that throws up any problems (you run that command in the command prompt)

Okay ill try now thanks

no worries

 

[jayw09]

okay, are you overclocked?

No...

 

[jayw09]

Anybody else got anything I can try?​

 

[Layback Bear]

In your first post you state that you reformatted your system.
Did you follow any tutorials? If so could you post which one you followed.
What Windows 7 did you install?

From post # 1

I just assumed I had a virus and reformatted the pc.