Solved Problem...Help me please

[LaSFeaR]

Hi guys
I got a Sony Vaio Few years ago with Windows Vista on it and yestarday i dicide to upgrade to Windows 7 Ultimate. I install Windows normally i restarted Laptop once i log in again i did some updates i restarted and after windows loading screen it shows me a black screen with a cursor i can move the cursor but nothing more. I close the laptop (from the Power buttom) i insert Windows 7 Disc to reformat again and when it says "Press any key to Boot from dc/dvd" I press a buttom and it show up a white bar saying "Windows Loading Files" after this finish my Windows start again from windows loading screen and still black screen. This means i cant replair my Windows from CD. After that i tryed to Install Windows XP it start and suddendly it says " Stop error 0x0000007B i cant reformat. i Cant open it. I cant use it at all. I need your help

 

[gregrocker]

Where did you get Win7? Did you burn the DVD yourself?

Enter your BIOS setup at boot to reset it to defaults. Then check the SATA controller to set to AHCI mode.
Under Boot Order set DVD drive to boot first, then HD. Save changes and exit.

Try booting DVD. Are you prompted to "Press any key to boot disk?" If not reboot and tap the one-time BIOS Boot Menu key given on first screen which is often F2 on Sony. What happens when you choose DVD?

Next try writing the Win7 installer ISO to flash stick using Universal USB Installer with WIn7 in dropdown menu. Boot under USB, Removable or HD's on one-time Boot Menu with HD set to boot first in BIOS setup.

If these all fail to boot the disk, use free Partition Wizard bootable CD which will autostart on its own, wipe the HD from Disk tab after clicking on DIsk # to highlight it.

THis will force the installer to autostart to reinstall.

If these steps fail you may have hardware problems. Use the hardware tests in these troubleshooting steps

 

[seavixen32]

Welcomre to Windows Seven Forums.

As your Vaio is a few years old, it's quite likely it has compatibility issues with Windows 7.

Unfortunately, you've formatted the hard drive so unless you can find a Sony Vaio recovery disc or know of the whereabouts of a Windows Vists disc your options are very limited.

If you can get hold of a Vista disc that is the same version as what was installed you can use that along with the product key on your laptop.

Your could also contact Sony and see if they can send you a factory restore disc.

 

[LaSFeaR]

Where did you get Win7? Did you burn the DVD yourself?

Enter your BIOS setup at boot to reset it to defaults. Then check the SATA controller to set to AHCI mode.
Under Boot Order set DVD drive to boot first, then HD. Save changes and exit.

Try booting DVD. Are you prompted to "Press any key to boot disk?" If not reboot and tap the one-time BIOS Boot Menu key given on first screen which is often F2 on Sony. What happens when you choose DVD?

Next try writing the Win7 installer ISO to flash stick using Universal USB Installer with WIn7 in dropdown menu. Boot under USB, Removable or HD's on one-time Boot Menu with HD set to boot first in BIOS setup.

If these all fail to boot the disk, use free Partition Wizard bootable CD which will autostart on its own, wipe the HD from Disk tab after clicking on DIsk # to highlight it.

THis will force the installer to autostart to reinstall.

If these steps fail you may have hardware problems. Use the hardware tests in these troubleshooting steps

The CD is not the original my uncle gave it to me. But it works i install it to my Desktop and it work fine
Well can u please explain me how to reset Bios and check the SATA controller to set to AHCI mode

 

[gregrocker]

You'll need to fill in more of your System Specs in the bottom left corner of your post. We at least need to know your make/model of computer or mobo before being able to answer in detail.

Generally you reboot the computer and tap the key given for BIOS setup. Then look for default settings on first page, or page through the tabs using the key given to find reset to Defaults. More here: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Once you reset to defaults, save and exit, reboot into BIOS setup to look at boot order. Set DVD drive first to boot, then HD. Then tab over to Storage or Hard Drive listings to find SATA controller settings, set to AHCI. Save changes and Exit. Try install.

Did your Uncle provide a Product Key for Ultimate? How are you activating it?

 

[Oldman54]

Application error

Help..
I`ve many error in my win7 Ultimate 64bit,it is about 3 month.
1.Application failed to initialize:0x80070002
2.C:\Windows\system32\ieframe.dll is either not design to run on Windows or it contain an error.Try installing the program again using the orginal installation media or contact your system administrator or the software vendor for support.
3. Alot of program not Responding..?

Thanks

 

[LaSFeaR]

:O I found a way i will install ubuntu from usb stick
I tryed to install windows from CD -USB but nothing i couldnt i am installing ubuntu now and then i will replace them with windows 7. I think at least. Thanks for your help guys

 

[gregrocker]

OldMan54:

Work through these troubleshooting steps, making sure to establish a Clean Boot, run SFC.

Report back results.


LaSFeaR:

Why did you not report back so we could give you other steps to get Win7 installed? THere is a process to troubleshoot a failing install.

Were you able to boot the DVD to install?

I asked for your computer make/model and you didn't even reply to that. Why would you ask for help and then not reply so we could help you?

 

[Oldman54]

Here my spec :
1. MB DFI LAN PARTY 785G-M35
2. RAM 2X Kingston KVR1066D3N7/2G
3. HDD Western Digital Sata 320 GB
4. OS Windows7 Ultimate 64.
I think the problem is my Harddisk,sometime Boot Missing,I tried to repair using Chkdsk C:/r.
Thanks for solution

 

[wanchoo]

It may be more helpful to start your own thread for your problem. Faster help would be forthcoming.

Here my spec :
1. MB DFI LAN PARTY 785G-M35
2. RAM 2X Kingston KVR1066D3N7/2G
3. HDD Western Digital Sata 320 GB
4. OS Windows7 Ultimate 64.
I think the problem is my Harddisk,sometime Boot Missing,I tried to repair using Chkdsk C:/r.
Thanks for solution

 

[LaSFeaR]

OldMan54:

Work through these troubleshooting steps, making sure to establish a Clean Boot, run SFC.

Report back results.


LaSFeaR:

Why did you not report back so we could give you other steps to get Win7 installed? THere is a process to troubleshoot a failing install.

Were you able to boot the DVD to install?

I asked for your computer make/model and you didn't even reply to that. Why would you ask for help and then not reply so we could help you?

Sorry but i dont know my computer model i know just that its sony vaio...

 

[LaSFeaR]

I have another problem now but not with my laptop
I have problem with my desktop i have windows 7 ultimate
All started when my Driver (the game by ubisoft) wont start up i read on ubisoft's forums to delete the game lancher and install it again but i had made a new folder for the game so i moved the game on another folder after i delete the lancher.
I install the lancher but because i moved the game i had to search an appilication to start with i choosed Driver.exe but i forgot that if i didn't unclick the check buttom all programs will start with this Then to open my browser i did the same with chrome.exe
Here is how my desktop looks like now

Please no comments for my Background pic xD

 

[pebbly]

Hi LaSFeaR, Try this http://www.sevenforums.com/tutorials/12196-open-change-default-program.html

 

[LaSFeaR]

Hi LaSFeaR, Try this http://www.sevenforums.com/tutorials/12196-open-change-default-program.html

Hi to you too
Thats what i did and now all my programs/games are like the pic.
Now i have to change each one to the normal again 1 by 1? or there is a way to do all together and it will take time to do 1 by 1 bcoz i have so many programs

 

[pebbly]

Hi LaSFeaR here you go http://www.sevenforums.com/tutorials/700-system-restore.html restore to a date prior to when you messed up

 

[LaSFeaR]

Hi LaSFeaR here you go http://www.sevenforums.com/tutorials/700-system-restore.html restore to a date prior to when you messed up

OMG Thank You SOOOO much it worked perfectly
I was ready to format >_< but it worked thanks again and have a nice day

 

[gregrocker]

Good calls Kathryn. Tried to rep you again but it won't let me yet.

 

[pebbly]

Hi LaSFeaR here you go http://www.sevenforums.com/tutorials/700-system-restore.html restore to a date prior to when you messed up

OMG Thank You SOOOO much it worked perfectly
I was ready to format >_< but it worked thanks again and have a nice day

You're very welcome LaSFeaR ,Glad we were able to help you

 

[pebbly]

Good calls Kathryn. Tried to rep you again but it won't let me yet.

Thank you so much greg, It really means a lot to me

 

[seavixen32]

Kathryn, I tried as well, but I got the same message as Greg.

It was still a good call though.