Question on troubleshoot: Fix Problems With Windows Update

[BostonDriver]

Under Control Panel... System and security there is a link to 'Fix Problems with Windows Update'

I keep fixing, and after the fix, re-run, and the same issue is found.

Is there something to fix the fix?

I already installed (several times) the SP1 Rediness hotfix.

Hotfix for Windows (KB947821)
Installation date: ‎3/‎13/‎2011 10:09 AM
Installation status: Successful
Update type: Important
Fix for KB947821

Even after that, this troublshooting tool still detects (and says it fixes) the issue.

Is there something else to look at?

 

[niemiro]

Hello!

Can you please post for me your C:\Windows\Logs\CBS\CheckSUR.persist.log?

Thanks!

Richard

 

[BostonDriver]

Can you please post for me your C:\Windows\Logs\CBS\CheckSUR.persist.log?

Hi Ricard. Here is the log. I ran this AFTER getting SP1 installed (details in other thread you replied to.)

I re-ran this because I still have the issue when troubleshoot windows update finds (and fixes) an error, but when I re-run, troubleshoot finds it again.

As mentioned, I also was able to get SP1 installed. SP1 shows up as an installed update. But it does NOT show up in "show recent updates" via windows update. The most recent run of CheckSER (KB 947821) done after SP1 installed does... it shows as the most recent.

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-12 20:43
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 677
No errors detected

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-13 10:00
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 540
No errors detected

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-13 12:49
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 438
No errors detected

Thanks

 

[niemiro]

Hello again!

Log looks good. No errors. The persist version includes all runs, not just the last one. There have never been any detected errors.

A few things...

You said that you deleted some folders. Which ones? Don't worry! You haven't done any damage! It is just that running this tool: How do I reset Windows Update components?

in aggressive mode will empty your history. Maybe you did something along those lines.

Please press the Windows Key + R to open the Run dialogue, and type winver. Press enter. Is SP1 installed there?

If it is, then fine.

Also, are there any other errors or problems which you are receiving related to Windows Updates?

Thanks!

Richard

 

[BostonDriver]

Hello again!

Log looks good. No errors. The persist version includes all runs, not just the last one. There have never been any detected errors.

A few things...

You said that you deleted some folders. Which ones? Don't worry! You haven't done any damage!

It was the folder that updates download into. I didn't delete, just moved the contents to a backup directory, just in case. C:\Windows\SoftwareDistribution\Downloads was an empty dir

It is just that running this tool: How do I reset Windows Update components?

in aggressive mode will empty your history. Maybe you did something along those lines.

I do not remember running that last night. I might have months ago, as Office Pro 2007 had update issues, and I ran some fix it (I posted about it at the time in case the solution helped others.) I know for a fact that I didn't check or click anything re aggressive mode, with Win7, ever.

Please press the Windows Key + R to open the Run dialogue, and type winver. Press enter. Is SP1 installed there?

If it is, then fine.

Also, are there any other errors or problems which you are receiving related to Windows Updates?

Other than SP1, the other 11 updates yesterday went fine. Had to uncheck SP1 to get to them all though.

winver shows SP1

But troubleshoot Windows Update still says it finds (and fixes) a problem... then finds the problem again

 

[niemiro]

Hello!

Please copy C:\Windows\WindowsUpdate.log into a new folder on your Desktop. Please copy C:\Windows\Logs\CBS\CBS.log into that folder also. Right click on that folder > Send to > Compressed (zipped) folder and upload that zip file here.

Then please give me as much detail from the troubleshooter as possible.

Thanks!

Richard

 

[BostonDriver]

Requested log files, screen shots (bmp) of the Windows Update Troubleshooter and printout (to pdf creator) of the "elevated diagnostics" the troubleshooter produces when click its 'print' icon are in the zip file... assuming I didn't screw up the upload... worst case I'll put it on my site and post (or PM) a link to it.

I ran the troubleshooter, then copied the logs. The most recent run will be the most recent timestamp / at the end of the logs

Thanks

 

[niemiro]

Hello!

With those logs, which I have just looked at, please do run this tool in Aggressive Mode: How do I reset Windows Update components?

I shall go more specific on those logs if necessary, but the above may well help with your errors.

Thanks!

Richard

 

[BostonDriver]

Hello!

With those logs, which I have just looked at, please do run this tool in Aggressive Mode: How do I reset Windows Update components?

I shall go more specific on those logs if necessary, but the above may well help with your errors.

Thanks!

Richard

I'm warned about using this tool for Windows 7

This article applies to a different version of Windows than the one you  are using. Content in this article may not be relevant to you.[URL="http://support.microsoft.com/ph/14019"]Visit the Windows 7 Solution Center[/URL]

 

[niemiro]

Hello!

With those logs, which I have just looked at, please do run this tool in Aggressive Mode: How do I reset Windows Update components?

I shall go more specific on those logs if necessary, but the above may well help with your errors.

Thanks!

Richard

I'm warned about using this tool for Windows 7

This article applies to a different version of Windows than the one you  are using. Content in this article may not be relevant to you.[URL="http://support.microsoft.com/ph/14019"]Visit the Windows 7 Solution Center[/URL]

Hello again!

Sorry about that. I forgot that Microsoft still have not fixed that :devil: It works absolutely fine on Windows 7. It is perfectly safe.

Thanks!

Richard

 

[BostonDriver]

Sorry for the delay in trying things. That job thing kept me busy. The delay did result in a new Win7 update being detected when I booted. So I installed it. Everything went smooth. So as things are, updates seem to behave. I still don't like that SP1 shows up as failed, canceled and never success. It does show up under installed updates

I tried the windows update troubleshooter I referred to earlier just to see what it says now. This time, I get the output below. I'm not told there is a problem anymore, but I'm told that what is there can't be fixed. I think the later is due to my having checked 'automatically fix'.

Since I can always try aggressive mode, I wanted to wait and provide this info first.

Windows Update
Potential issues that were checked
Repair default Windows Update locations Issue not present
Repair Windows Update components Issue not present
Potential issues that were checked
Repair default Windows Update locations Issue not present
Change Windows Update locations to Windows default settings
Repair Windows Update components Issue not present
Repairing Windows Update components frequently resolves common Windows
Update errors
Detection details
Collection information
Computer Name: P690-WIN7-64
Windows Version: 6.1
Architecture: amd64
Time: Friday, March 25, 2011 9:04:03 PM
Publisher details
Windows Update
Resolve problems that prevent you from updating Windows.
Package Version: 4.0.2.20110211
Publisher: Microsoft Corporation
Page 1 of 1
file://