Random BSOD, error 0x0D1

[Terronium 12]

Been having this problem for quite a while but forgot to enable small dumps, thus I was never able to get help on the issue.

If this is still the same stop code (0x0D1) then I'd appreciate any help in getting this annoyance out of my hair. It happens randomly but I do believe from reading up on it that it's either Avast! or driver-related and since I was having this problem before I installed Avast! I would say it's fairly decisive to exclude that as a possible culprit, but I'd love to be proven wrong and have the problem accessed by someone who can actually read these things.

Thanks in advance.

 

[Arc]

Bad news, Michael Crashes are not good.
Your crash dump indicates recurring ATI Display Driver failure.

fffff880`065bc3a8  fffff880`04b16d35Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0xa4d35
fffff880`065bc3b0  fffffa80`0a583480
fffff880`065bc3b8  fffff880`04457345Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x6345
fffff880`065bede8  fffff880`04113f12Unable to load image cmdguard.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cmdguard.sys
*** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys
 cmdguard+0x22f12

Install the latest beta, iit may work better than the July version of ATI driver.

After making the change, let us know the results.
It may take some further analysis, I am guessing

 

[Terronium 12]

Been away for a bit but that's definitely not something I wanted to hear.

I just went through two more stop screens, one of which happened while uninstalling the AMD drivers. I've attached both, but for the time being I'll wipe everything AMD-related clean (including profiles) and I'll go from whatever the latest two indicate.

 

[Arc]

ATI Function Driver for HD Audio Service.

*** WARNING: Unable to verify timestamp for AtihdW76.sys
*** ERROR: Module load completed but symbols could not be loaded for AtihdW76.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88008e0152c, fffff880035ee818, fffff880035ee070}

[COLOR=Red]Probably caused by : AtihdW76.sys[/COLOR] ( AtihdW76+152c )

Followup: MachineOwner
---------

Update it from AMD Support & Drivers.

And, another one is Logitech SetPoint HID Filter Driver.

fffff800`04bc3ed8  fffff880`05e66595Unable to load image LHidFilt.Sys, Win32 error 0n2
[COLOR=Red]*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
 LHidFilt+0xc595[/COLOR]

Update it from Logitech - Support & Software Downloads.
At the same time, change the display driver, too.

 

[Terronium 12]

Updated to 12.9 and reinstalled Setpoint as the most up-to-date version for the G9x is exactly what I had installed - 6.32.

Let's see how things go from here. Greatly appreciated!

 

[Terronium 12]

Not out of the woods yet it would seem. I came over to my computer moments ago, turned on the monitor and saw it had blue screened, perhaps overnight.

Same code as the original post: 0x0D1 and the cause was usbport.sys (Driver_IRQL_Not_Less_Or_Equal). Dump attached.

 

[Arc]

Mate you do two things here.

First update the Atheros AR9271 Wireless Network Adapter driver from ATHEROS drivers for Microsoft Windows (Atheros?????).

fffff800`00b9c6f8  fffff880`02c187c3Unable to load image athurx.sys, Win32 error 0n2
[COLOR=Red]*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
 athurx+0x27c3
[/COLOR]++++++++++++++++++++++++++++++++++++++++[COLOR=Red]
[/COLOR]lmvm athurx
start             end                 module name
fffff880`02c16000 fffff880`02dde000   athurx   T (no symbols)           
    Loaded symbol image file: athurx.sys
    Image path: athurx.sys
   [COLOR=Red] Image name: athurx.sys
    Timestamp:        Tue Jan 05 08:53:16 2010[/COLOR] (4B42B0A4)
    CheckSum:         001C7F92
    ImageSize:        001C8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

It is not only failing, but also too old.

Also, Disable http://www.sevenforums.com/tutorials/147369-usb-selective-suspend-turn-off.html.

Let us know the results.

 

[Terronium 12]

Done and done (it was enabled so I disabled it). Will report if anything happens.

I'd rep you again if I could.

 

[Arc]

Sure mate!
Let us know for any further problem!

 

[Terronium 12]

Man, I cannot catch a break with this. Same thing - 0x0D1.

Dump attached:

 

[Arc]

This time it is due to Blackmagic Design Pty. Ltd Intensity Pro driver.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff8804663c7d7, 2, 8, fffff8804663c7d7}

Unable to load image Intensity.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Intensity.sys
*** ERROR: Module load completed but symbols could not be loaded for Intensity.sys
[COLOR=Red]Probably caused by : Intensity.sys [/COLOR]( Intensity+25c93 )

Followup: MachineOwner
---------
lmvm Intensity
start             end                 module name
fffff880`0472e000 fffff880`04782000   Intensity T (no symbols)           
    Loaded symbol image file: Intensity.sys
    Image path: Intensity.sys
[COLOR=Red]    Image name: Intensity.sys
    Timestamp:        Thu Aug 18 14:08:29 2011[/COLOR] (4E4CCF85)
    CheckSum:         0004FDF2
    ImageSize:        00054000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update it from Blackmagic Design: Support.

 

[Terronium 12]

That simple, huh? Thanks as always.

 

[Arc]

Sometimes things are simple

Let us know the result!

 

[Terronium 12]

Got this one earlier today and I suspect it has something to do with the Catalyst drivers as I just installed the 12.10 Profiles and was trying to DL the 12.10 driver itself, remembering I only had the 12.9 Beta.

If it is to do with ATi then I'll just update to 12.4. Other than that I can't possibly think of what the probem is.

 

[Arc]

That is why you were having so much and so frequent crashes. Hardware.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

[COLOR=Red]BugCheck 124[/COLOR], {0, fffffa800a3d9028, b2000000, 10005}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

Follow the guide http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

You are to find it out, what device is causing the problem, and replace it.