Random BSOD

[Dave76]

Your RAM is DDR3, Double Data Rate version3, 666MHz X 2 = 1333MHz, it is set correctly.

CPU voltage is for the i3 processor, CPU VTT voltage is the CPU integrated memory controller.
The CPU VTT needs a voltage bump, let me know the current voltage first, then I will recommend a bump, too much voltage here can damage the CPU.

The CPU VTT should be in the same section as the CPU and DRAM voltage.

Check your motherboard BIOS manual page 40, tab O.N.E. > Voltage Control.

It will look like:
View attachment 168750

 

[hdfsi]

Ok here they are.
CPU Vcore - 1.176
CPU Vtt - 1.169
DRAM - 1.587

 

[Dave76]

Those are pretty high voltage settings for 4GB RAM.

Are those setting in 'Auto'?
If they are in 'Auto' change it to 'Manual', the set the DRAM voltage to 1.60v and CPU VTT voltage to 1.170v, Save and Exit.

Manually set (change to Manual) the first four RAM timings to:
9
9
9
24
Leave the rest on 'Auto', make sure the 'Command Rate' is still on 2T.


Are the RAM cards in slots A1 and B1?
From the CPU it would be slots 2 & 4, if not then change them.

Run memtest86+ for a full 6 passes, best to run overnight.
If you get any errors you can stop the test.

 

[hdfsi]

Ok will do. And yes Everything was in auto will change them.
And you want me to move both ram one slot over.
And my ram from my cpu it goes like this X = Installed O = Uninstalled.
1 - 2 - 3 - 4
X O X O

 

[Dave76]

Your mobo manual shows X=not installed and O=Installed.

Count from your CPU, slot #1 empty, slot #2 RAM card installed, slot #3 empty, slot #4 RAM card installed.

These are the correct RAM slots for 2 RAM cards.

 

[hdfsi]

Ok got it fixed. Thanks i am going to run Memtest all night and i will tell you the results.

 

[Dave76]

Ok, let us know the results.

 

[hdfsi]

Ok i just went into my BIOS and set my DRAM to 1.60v But on my CPU Vtt The options are 1.165v or 1.180v

 

[hdfsi]

Memtest finished with 14 passes no errors.

 

[Dave76]

Set CPU Vtt to 1.180v.

Good that there are no errors, just because memtest86+ has no errors doesn't mean that the RAM is 100% ok. Have seen memtest86+ pass several times and then have errors on the next test.

Use your computer and try to simulate the crash scenario.

Let us know if you have any crashes.

 

[hdfsi]

Ok will do. Thanks!

 

[hdfsi]

Hmm Got one i walked out and walked back in like 20 secs later and BSOD.

 

[Dave76]

Can you post all of the supporting information files?

Blue Screen of Death (BSOD) Posting Instructions

This will give us more current information to use in diagnosing the crashes.



STOP*0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes:* Device driver
Cause: A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high.
This bug check is usually caused by drivers that have used improper addresses.

It's blaming a Windows driver, which are rarely to blame.
Check drivers:
Check for new drivers or upgrade. If none can be found, disable or uninstall for testing purposes.
ManyCam Virtual Webcam, http://download.manycam.com/

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800408454a, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002aba100
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
afd!AfdPoll32+5ca
fffff880`0408454a 498b4500        mov     rax,qword ptr [r13]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  bitcoin.exe

TRAP_FRAME:  fffff88006619740 -- (.trap 0xfffff88006619740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000001afd rbx=0000000000000000 rcx=fffffa80061dde50
rdx=0000000000000099 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800408454a rsp=fffff880066198d0 rbp=fffffa800405ede0
 r8=000000000000afd1  r9=0000000000000000 r10=0000000000000000
r11=000000000000afd4 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
afd!AfdPoll32+0x5ca:
fffff880`0408454a 498b4500        mov     rax,qword ptr [r13] ds:5ee0:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff8000288a2a9 to fffff8000288ad00

STACK_TEXT:  
fffff880`066195f8 fffff800`0288a2a9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`06619600 fffff800`02888f20 : fffff880`00000001 00000000`00003db3 00000000`00000001 ffffffff`fff85ee0 : nt!KiBugCheckDispatch+0x69
fffff880`06619740 fffff880`0408454a : ffffffff`fff85ee0 fffffa80`03eeade0 fffffa80`0589a620 00000000`00000000 : nt!KiPageFault+0x260
fffff880`066198d0 fffff880`04076fe5 : fffffa80`05429a00 fffffa80`0405ee00 00000000`00000000 00000000`00000000 : afd!AfdPoll32+0x5ca
fffff880`066199e0 fffff800`02ba5127 : fffffa80`066e51e0 fffff880`06619ca0 fffffa80`0589a810 fffffa80`0589a620 : afd! ?? ::GFJBLGFE::`string'+0x1f35
fffff880`06619a10 fffff800`02ba5986 : 00000000`072cf100 00000000`00000360 00000000`00000001 00000000`00000000 : nt!IopXxxControlFile+0x607
fffff880`06619b40 fffff800`02889f93 : 00000000`742c2450 00000000`072cf170 00000000`072cfd20 00000000`7ef95000 : nt!NtDeviceIoControlFile+0x56
fffff880`06619bb0 00000000`742c2e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`072cf0f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x742c2e09


STACK_COMMAND:  kb

FOLLOWUP_IP: 
afd!AfdPoll32+5ca
fffff880`0408454a 498b4500        mov     rax,qword ptr [r13]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  afd!AfdPoll32+5ca

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: afd

IMAGE_NAME:  afd.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4db4dd96

FAILURE_BUCKET_ID:  X64_0xD1_afd!AfdPoll32+5ca

BUCKET_ID:  X64_0xD1_afd!AfdPoll32+5ca

Followup: MachineOwner
---------

Let's check for a driver that might be causing this, Driver Verifier - Enable and Disable

Enable Driver Verifier and use system normally. Let it run for 24 hours or let us know if there are problems.

 

[hdfsi]

Ok i removed manycam and i run the tests.

 

[Dave76]

Here are some errors from your system event viewer.


There are a lot of this driver errors.
Un-install itunes if you have it installed, then see if you're still getting crashes.
itunes is known to cause crashes on Windows 7.
CD-ROM Class Filter Driver by Gear Software, Also comes with iTunes.
Check for a new driver if it is not itunes: GEAR Software - DVD Mastering Software & CD Burning Software & GEAR PRO Mastering

Event[140]:
  Log Name: System
  Source: Application Popup
  Date: 2011-08-08T12:58:31.375
  Event ID: 1060
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: hdfsi-PC
  Description: 
[B][COLOR="Red"]\SystemRoot\SysWow64\Drivers\GEARAspiWDM.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver[/COLOR][/B].

You can get the update from Windows Update.

Event[161]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2011-08-08T12:52:27.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: hdfsi-PC
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
 	Feature: Behavior Monitoring
 	Error Code: 0x80004005
 	Error description: Unspecified error 
 	[B][COLOR="red"]Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection[/COLOR][/B].

D/L and run Seagate SeaTools – Short Drive Self Test and Long Drive Self Test

Event[472]:
  Log Name: System
  Source: Disk
  Date: 2011-08-07T15:45:45.858
  Event ID: 11
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: hdfsi-PC
  Description: 
The driver detected a controller error on \Device\Harddisk1\DR1.

These are errors from your Application event viewer:


If you're having problems with MSE, un-install it and then re-install.

Event[1]:
  Log Name: Application
  Source: SideBySide
  Date: 2011-08-08T17:59:56.000
  Event ID: 72
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: hdfsi-PC
  Description: 
Activation context generation failed for "c:\program files\microsoft security client\MSESysprep.dll".Error in manifest or policy file "c:\program files\microsoft security client\MSESysprep.dll" on line 10. The element imaging appears as a child of element urn:schemas-microsoft-com:asm.v1^assembly which is not supported by this version of Windows.

 

[hdfsi]

Been along time but i am still getting bluescreens like nothing.. I dont know why still. Here are some dumps. All the info is already in the thread.

 

[hdfsi]

Any help plz

 

[Dave76]

Have you done any of the previous suggestions?

If yes, can you give us some details?

 

[hdfsi]

yes i have

 

[hdfsi]

here are 3 BSODS from today maybe you can tell me what i should do first. with drivers.