Re-imaging a SSD.

Shootist

New member
Local time
7:22 AM
Messages
578
I have a Intel 320 120GB SSD that I just installed last Tuesday. Everything went well with loading a image on it from my spinning HDD. Offset is correct and thdrive is running well.

I got up the other morning to find that somehow Windows Auto Update had been turned on and the system had restarted after Win Update had downloaded & installed 18 updates without my permission.

So today I re-loaded that original image I had used on Tuesday to get rid of the 18 updates (Whether I do them in the further is up to me not MS).

This started me thinking about loading a image on a SSD drive.
1) Should I first run the Clean All command to wipe the drive before loading a image on it?
2) What effect does re-imaging a SSD have on the data, partitions and files that are already on the drive?

The program I use is Acronis TI 2011 that they say has full SSD support. But what does that really mean. During the re-image TI deletes all partitions and then recreates them as to what is contained in the image, even if they are the same.
Reading some reports about SSDs deleting partitions & formatting the speed of the SSD was reduced by just deleting a partition and then recreating it and wasn't reduced by just formatting it. In fact formatting it seemed to improve the performance.
So now I'm wondering Should I go back and format or run the Clean All command and then re-image the drive with that original image.

Or am I just being totally Anal Retentive.

Thanks for any comment. And I do mean any.
 

My Computer My Computer

Computer Manufacturer/Model Number
Built be Me
OS
Windows 7 Pro x64
CPU
i5 760
Motherboard
Asus P7P55D-E Pro
Memory
16GB
Graphics Card(s)
Nvidia GTS450
Sound Card
On board
Monitor(s) Displays
Dell 2007WFP Dell 1800FP
Screen Resolution
1680x1050 1280x1024
Hard Drives
Seagate 250GB & 750GB
WD 1TB
PSU
Antec 750
Case
In Win
Cooling
Cooler Master Hyper 212+
Keyboard
IBM
Mouse
MS
I say leave it alone, when TI puts the image back on the drive it will format it correctly.

I personally use the steps given here when I want to clean my Intel SSDs prior to re-imageing my drives. The info came from the OCZ forum but is applicable to any SSD.

Secure Erase with bootable CD

You can download Parted Magic here.
 

My Computer My Computer

Computer Manufacturer/Model Number
My Build
OS
win7 Ult 64
CPU
i7 3930K & 3960X
Motherboard
ASUS P9X79 Deluxe
Memory
16GB G-Skill 2133MHz
Graphics Card(s)
Sapphire HD 7970
Sound Card
On-board
Monitor(s) Displays
ASUS 27 inch
Screen Resolution
1920X1080
Hard Drives
Crucial M4 256GB, 1.5TB WD Black for Data/Images
PSU
Corsair AX1200
Case
NZXT 810
Cooling
Custom Loop, Swiftech HDBlock
Keyboard
Mionix
Mouse
Mionix
Internet Speed
Cable
I always restore on top of the existing partition. Never had any problems - even not with my Gen1 SSDs. And I restore relatively often because I always muck up the systems with my "experiments".
 

My Computer My Computer

Computer Manufacturer/Model Number
HP, Dell, Gateway, Toshiba - 4 laptops and 2 desktops
OS
Vista, Windows7, Mint Mate, Zorin, Windows 8
CPU
from 1.6GHz Duo to i7
Monitor(s) Displays
2x HP w2207
Hard Drives
5x HDD, 7x SSD, 12x Externals
Keyboard
with trackball - no mices
Mouse
Trackball mice
Internet Speed
DSL 6000
Thanks for the replies and a little reassurance.
 

My Computer My Computer

Computer Manufacturer/Model Number
Built be Me
OS
Windows 7 Pro x64
CPU
i5 760
Motherboard
Asus P7P55D-E Pro
Memory
16GB
Graphics Card(s)
Nvidia GTS450
Sound Card
On board
Monitor(s) Displays
Dell 2007WFP Dell 1800FP
Screen Resolution
1680x1050 1280x1024
Hard Drives
Seagate 250GB & 750GB
WD 1TB
PSU
Antec 750
Case
In Win
Cooling
Cooler Master Hyper 212+
Keyboard
IBM
Mouse
MS
Back
Top