Solved Recurring BSODs before/after startup

[RJ116]

I haven't contacted corsair yet, but just another thing;
It seems that some BIOS options are actually not matching the defaults, but I can't reset them because the system just loses power before the restart... Would clearing the CMOS be worth it to reset default values?

 

[Britton30]

CMOS reset may help. You may want to double check all the power connections to verify they are all tight and fully seated in their sockets and connectors as well.

It is sounding more like some PSU issue though.

 

[RJ116]

The CMOS reset actually seems to have fixed the issue entirely, no restarts have occured for about a week now I think. Do you reckon it is still worth contacting corasir about the PSU?

 

[Britton30]

It won't hurt/cost anything to ask Corsair. This may be a good time, two other members returned theirs and Corsair sent them a better PSU. No guarantee they will for you, but what the heck?

 

[RJ116]

Haha, fair enough. Thank you all very much for your help

 

[RJ116]

I appear to have spoken too soon, as I am now getting "An attempt was made to write to read only memory" and "paged file in non paged area" bsods. .

 

[essenbe]

I assume you have tried resetting CMOS again. I know we have been through this before, but the message sound like memory to me. You may also try the scannow http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

 

[Britton30]

I appear to have spoken too soon, as I am now getting "An attempt was made to write to read only memory" and "paged file in non paged area" bsods. .

Those can be cause by a memory issue, try this:
RAM (memory):Test

This will require memtest on a bootable CD or USB stick.
RAM - Test with Memtest86+​

 

[RJ116]

Yeah, i'll run memtest again tonight. Would it be helpful if I post another folder from that sevenforums diagnostic tool?

 

[koolkat77]

Yeah, i'll run memtest again tonight. Would it be helpful if I post another folder from that sevenforums diagnostic tool?

Yup

 

[RJ116]

Here you go. Is it possible that this is a software issue, or does it sound more like a hardware one? I seem to be able to run indefinitely on safe mode without any problems

 

[koolkat77]

Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.

http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html
http://www.sevenforums.com/tutorials/1401-startup-programs-change.html

Overclocking

If you are overclocking any hardware, STOP. Reset any changed values back to default.

This is overclocking software and can lead to system instability and BSOD's. Please reset all components to their stock speeds and then remove the software.

Start Menu\Programs\ASUS	Public:Start Menu\Programs\ASUS	Public
Start Menu\Programs\ASUS\AI Suite II	Public:Start Menu\Programs\ASUS\AI Suite II	Public

Temperature

For monitoring heat of the system, use Speccy or HWMonitor:

Speccy System Information
HWMonitor

SFC scannow

The SFC /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

1. Click on the Start rb:
2. Scroll to Accessories
3. Select Command Prompt > Right click and Run as Administrator
4. Type

   SFC /scannow

Disk Check

Run disk check for errors on your Hard Drive(s) http://www.sevenforums.com/tutorials/433-disk-check.html

Stress Test

Hardware - Stress Test With Prime95: http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html
CPU - Stress Test Using IntelBurnTest: http://www.sevenforums.com/tutorials/220743-cpu-stress-test-using-intelburntest.html
Video Card - Stress Test with Furmark: http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

Monitor temperature of the system during the tests (with speccy or hwmonitor listed earlier)

This is for information purposes only. The drivers in red should be updated. If updating does not help, remove them.

hamachi.sys Thu Feb 19 16:36:41 2009 (499D3639)
LogMeIn Hamachi Virtual network interface driver
http://www.carrona.org/drivers/driver.php?id=hamachi.sys

The below is for information purposes only. Contains relevant information from the blue screen analysis:

[FONT="Lucida Console"]Debug session time: Wed Apr 24 22:07:35.377 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-53929-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:40.251
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003592671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003592671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Wed Apr 24 21:49:48.630 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-50934-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:03.879
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003558671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003558671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Wed Apr 24 21:41:10.732 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-19016-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:03.981
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003560671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003560671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Wed Apr 24 12:59:35.621 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042413-19796-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:02.870
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003592671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003592671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Apr 23 02:34:13.532 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-14476-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:57.407
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+44cde )
BugCheck BE, {fffff8a000120000, 80000001c5d08121, fffff880029e7150, b}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x000000BE]ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)[/url]
Bugcheck code 000000bE
Arguments: 
Arg1: fffff8a000120000, Virtual address for the attempted write.
Arg2: 80000001c5d08121, PTE contents.
Arg3: fffff880029e7150, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0xBE_nt!_??_::FNODOBFM::_string_+44cde
MaxSpeed:     3300
CurrentSpeed: 3365
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Apr 23 02:30:47.782 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-15958-02.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:55.656
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003546671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003546671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Apr 23 02:29:09.463 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-15958-01.dmp]
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:57.712
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck BE, {fffff8a00011e000, 80000001cb504121, fffff880029ee150, b}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x000000BE]ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)[/url]
Bugcheck code 000000bE
Arguments: 
Arg1: fffff8a00011e000, Virtual address for the attempted write.
Arg2: 80000001cb504121, PTE contents.
Arg3: fffff880029ee150, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Apr 23 02:27:27.841 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042213-15865-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:53.715
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff8000359c671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8000359c671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Apr 21 16:41:45.770 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042113-14929-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:02.644
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+44cde )
BugCheck BE, {fffff8a0000a7000, 80000001cc980121, fffff880029b6150, b}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x000000BE]ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)[/url]
Bugcheck code 000000bE
Arguments: 
Arg1: fffff8a0000a7000, Virtual address for the attempted write.
Arg2: 80000001cc980121, PTE contents.
Arg3: fffff880029b6150, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR:  0xBE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0xBE_nt!_??_::FNODOBFM::_string_+44cde
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Apr 21 16:35:14.582 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042113-15116-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:34.831
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff8000355c671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8000355c671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Apr 21 16:31:56.322 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\042113-15397-01.dmp]
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:56.571
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 50, {ffffffffffffffff, 0, fffff800035ac671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800035ac671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Apr 18 13:19:42.017 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041813-21652-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:11.892
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003550671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003550671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Apr 18 13:17:46.676 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041813-19234-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:47.925
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003558671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003558671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Apr 15 13:21:50.971 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041513-21793-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:18.220
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003593671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003593671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Apr 15 13:18:09.395 2013 (UTC + 6:00)
Loading Dump File [C:\Users\Koolkat77\SysnativeBSODApps\041513-18922-01.dmp]
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:01:39.644
Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellPaged+a1 )
BugCheck 50, {ffffffffffffffff, 0, fffff80003558671, 0}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x00000050]PAGE_FAULT_IN_NONPAGED_AREA (50)[/url]
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffff, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003558671, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  services.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!HvpGetCellPaged+a1
MaxSpeed:     3300
CurrentSpeed: 3399
BiosVersion = 1015
BiosReleaseDate = 05/02/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``[/FONT]

 

[RJ116]

Does this seem to be a driver problem then?

 

[VistaKing]

Most recent BIOS VERSION

NAME | VERSION | OPERATING SYSTEM | DOWNLOAD
P8Z77-V PRO BIOS|

1908​

|

Windows 7 x64-bit​

|
Download

FIXES:
1.Fixed Power On By RTC function failed.
2.Fixed F8 function is abnormal under fastboot
3.Support new CPUs. Please refer to our website at: ASUSTeK Computer Inc. -Support- CPU Support

   Note

Read manual on how to upgrade bios

 

[RJ116]

I am running a chkdsk /r at the moment so I will run memtest during the day tomorrow and update the bios in the evening.

 

[koolkat77]

You mentioned having no BSOD's in safe mode so it does sound like a driver problem.

When did you last reinstall windows?

 

[VistaKing]

I am running a chkdsk /r at the moment so I will run memtest during the day tomorrow and update the bios in the evening.

RJ116

I believe you forgot the /F

For

chkdsk /F /R

 

[RJ116]

I'd say the last time I installed windows was a bit before I got my new RAM, so a couple of months ago. CHKDSK and SCANNOW don't seem to have fixed anything, and memtest picks up no errors after 10 passes. A clean startup still bsod's with the "paged fault in non paged area" code.
I have deleted hamanchi and it's driver but that didn't seem to help.

Also, I have yet to have a bsod in safe mode, if that is of any use...

 

[koolkat77]

I'd say the last time I installed windows was a bit before I got my new RAM, so a couple of months ago. CHKDSK doesn't seem to have fixed anything, and memtest picks up no errors after 10 passes. A clean startup still bsod's with the "paged fault in non paged area" code.
I have deleted hamanchi and it's driver but that didn't seem to help.

Also, I have yet to have a bsod in safe mode, if that is of any use...

Start afresh.

Follow this tutorial for a perfect reinstall - http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html

 

[RJ116]

Start afresh.

Follow this tutorial for a perfect reinstall - http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html

I shall. Backing up my user folder now