Solved SPEEDFAN giving a wild reading - Bug?

[TVeblen]

Does Speedfan have a problem with newer motherboards and/or processors?

I am getting a reading of 124C for the CPU in Speedfan. This is on a P9X79-Pro board with an i7-3820, all running at default speeds.

The motherboard UEFI shows at temp or 32C. And I checked with a digital thermometer - not above 32C. All the other temps in Speedfan correspond to the UEFI readings. It's only the processor with that wild reading.

The processor would have shut down long ago if it were running that hot. But the inside the case and the surface of the cooler pipes are cool.

I mostly use Speedfan to get fast SMART readings, not temps or fan control. But I'm curious if anyone else has seen this and knows what it is.

 

[pbcopter]

I am using a Gigabyte GA X79 UD5 board with the Intel i7 3820 and Speedfan version 4.47 reads the correct temps for the CPU.

 

[Solarstarshines]

Does Speedfan have a problem with newer motherboards and/or processors?

I am getting a reading of 124C for the CPU in Speedfan. This is on a P9X79-Pro board with an i7-3820, all running at default speeds.

The motherboard UEFI shows at temp or 32C. And I checked with a digital thermometer - not above 32C. All the other temps in Speedfan correspond to the UEFI readings. It's only the processor with that wild reading.

The processor would have shut down long ago if it were running that hot. But the inside the case and the surface of the cooler pipes are cool.

I mostly use Speedfan to get fast SMART readings, not temps or fan control. But I'm curious if anyone else has seen this and knows what it is.

I don't use it isn't accurate if your machine was that hot it would have caught fire

it gave me a reading of 130f one time we all know that board and machine would have melted just use core temp or hardware monitor you will be better off

 

[TVeblen]

Fascinating.
Right Click on Speedfan > Run as Administrator > CPU temp: 38C
Doh!

 

[pbcopter]

Yeah, you must run it as administrator. I set up a task in the task manager to run it at logon with highest privileges.

 

[TVeblen]

And I knew that! You can't get any hard drives to show up unless it runs as Administrator.
I had just installed a new version and tested to see that it started OK and saw that temp and freaked out.

Stupidy