taskhost.exe explorer.exe gwx.exe and dwm.exe multiple errors

bmooch1

New member
Local time
7:09 AM
Messages
2
When I boot into my computer I get the following message:

The instruction at 0xff7773f0 referenced memory at 0xff7773f0 the memory could not be written click ok to terminate.

I click ok then get

explorer.exe application error The exception Privileged instruction. 0xc0000096 occured int he application at location 0xf7631f54 click ok to terminate the program

I click ok then get

GWX.exe application error The instruction at 0x3f361 ade referenced memory at 0x0000006b the memory could not be read click ok to terminate the program

I click ok then get
dwm.exe application error. The application was unable to start correct (0xc0000005) click ok to close the application

If I try to use ctrl alt delete it gives me the dwm error listed above

If I try to create new task I get taskmgr.exe application error. The exception Privileged Instrucation 0xc0000096) occured in the appilcation at location 0xfb7c1f54 click ok to terminate


Here's what I can notice that's difference.. I started to get the dwm.exe error and then it progressively went down hill. It seems the font/display is different and I can't use the touchpad on the pc. I ran Kaspersky disk and it found some odds and ends mostly things that I knew were there but I haven't downloaded or really installed anything lately outside of some windows updates. The odd thing is that I can use the touchpad there. Safe mode doesn't do much either and I can't see my icons at all..
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Home Premium 64
Figured I would peak in and see if any one may have a suggestion to try?

Thx
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Home Premium 64
Hi and welcome to SevenForums,
That is quite a pickle :(

All I can think of is use either of the Linux recovery options to first recover your personal files :/
http://www.sevenforums.com/software/198909-lucid-puppy-way-recover-files-non-bootable-computer.html

http://www.sevenforums.com/tutorials/287439-emergency-kit-save-your-files-dead-os.html

Not sure if you have a installation disk or not to try a repair install :/
http://www.sevenforums.com/tutorials/3413-repair-install.html

If not you can download a win-7 iso file and burn it to flash or cd and clean install after recovering your personal files
http://www.sevenforums.com/installation-setup/383716-iso-image-2.html#post3163070

http://www.sevenforums.com/tutorials/2432-usb-windows-7-installation-key-drive-create.html
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom assembled by me :}
OS
Win-7-Pro64bit 7-H-Prem-64bit
CPU
i7-5930K 2nd i9-9940x both water blocked VRM's too
Motherboard
ASUS SABERTOOTH X99 2nd ASUS x299 Apex
Memory
Trident-z 3200C14 2nd Trident-z 3600C16
Graphics Card(s)
EVGA 1080ti ftw3 2nd Titan Xp both water blocked
Sound Card
Built-in Realtek
Monitor(s) Displays
1-AOC G2460PG 24"G-Sync 144Hz/ 2nd 1-ASUS VG248QE 24" 144Hz
Screen Resolution
1920 x 1080 144Hz
Hard Drives
2-Samsung M.2 Evo & Evo Plus
2-Samsung 850 EVO 500GB SSD's/ 3-2.5 W.D. Black 1tb-&3-1tb/3-3.5 WD Black 1tb hdd's
PSU
EVGA SuperNOVA 1000-P2 2nd 1200-P2
Case
2-Corsair Obsidian Series 450D Black ATX Mid Tower
Cooling
Custom water loops
Keyboard
Logitech G710+/ 2nd Logitech G910
Mouse
2-RedDragon M901 Perdition 16400 dpi Gaming mouse = wired
Internet Speed
Comcast Ping 19ms 89.31mbps download speed 6.12mbps upload
Antivirus
Malwarebytes Pro/ Superantispyware Pro
Browser
FireFox & Pale moon
Other Info
2nd ASUS X299 Apex/Intel i9-9940x with Custom water loop/7H-Prem-x64/Corsair 450D case/Ram Trident-z 3600C16 4x8gb / Samsung970Evo plus 500gb SSD/Dual ssd EZ swap evo/PSU EVGA SuperNova 1200w-P2 80+Platinum/GPU Titan Xp /8-ML-140 on push-pull on 2-280GTX rads
Back
Top