What's your memory assessment speed?

[StalkeR]

Hehe... Thanks panais!

 

[Dave76]

Nice improvement StalkeR, 64bit is the best way to go for several reasons, RAM being a good one.

 

[StalkeR]

Thanks Dave!

 

[Umut]

I have (4+2)6GB DDR3 Dual 1333Mhz ELPIDA ram in my laptop. Can anyone give opinion if it's good performance or not? If it's not how can i improve it without buying a new ram

 

[A Guy]

Your ram will only run at the speed of the slowest ram. It is always best to run matched dimms (same speed, size, and even manufacturer). If both the dimms are from the same manufacturer, and are indeed both the same speed, some improvement in the numbers might be had by just running the 4GB dimm only. But the numbers are no substitute for the extra 2GB of ram, so I'd say other then changing the timings (unlikely with a laptops BIOS), then it's probably the best you can hope for. A Guy

 

[Umut]

It's an original HP laptop i didn't change anything in it and the manufacturer is the same. If i use only 4gb one won't it slow down on some games using too much ram?

 

[A Guy]

If it came that way from HP, then it won't help. More ram will be better for you. Only changing to performance ram, if there is any, would make it better. A Guy

 

[Umut]

Thanks for advice A Guy.

 

[barbarossa2241]

Hi,

I am posting this but I need help understanding what it means. Is my PC memory OK ?

DIMM2: Elpida EBJ21UE8BFU0-DJ-F 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

DIMM4: Hynix HMT351S6BFR8C-H9 4 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

 

[Britton30]

barbarossa2241 That shows the transfer speed of your memory and it looks fine. It would be a good idea to have identical RAM sticks though, it might help performance.

Here's mine with 4GB of matching RAM, GSKill 1066, 7-8-7-24T

 

[barbarossa2241]

barbarossa2241 That shows the transfer speed of your memory and it looks fine. It would be a good idea to have identical RAM sticks though, it might help performance.

Here's mine with 4GB of matching RAM, GSKill 1066, 7-8-7-24T
View attachment 188699

This is a new Asus laptop and this is the way it came. I am very happy with it so far. Thanks for the reply Britton. Now I know what was this thread about.

 

[mrdemon]

I think im going to throw all my TOYS out of the pram in a damn min.....

In a recent thred of mine I upgraded the MEM i had from 4 too 8 gig from 1333 too 1600, but under clocking the *******s as I cant for the love of me get them to get too 1600. Weather its the motherboard or the CPU being a bitch who knows, Now I see this thread and see that people getting in the 10k range and I am only getting the following................................................

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.15
> Memory Performance 6835.04 MB/s
> Total Run Time 00:00:07.14

C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.15
> Memory Performance 6845.00 MB/s
> Total Run Time 00:00:07.33

C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.15
> Memory Performance 6830.58 MB/s
> Total Run Time 00:00:06.99

C:\Windows\system32>

:banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead:

 

[Hopalong X]

Intel® Core)

1333MHz front side bus speed.
Voltage range is 0.85-1.3625v

The best you can do possibly is set it to auto and let the bios find the fastest speed possible.
1333MHz may be tops though.

Also from Asus.> ASUSTeK Computer Inc. - Motherboards- ASUS P5Q3 Deluxe/WiFi-AP @n

** DDR3 2000(O.C.)/1600, it is suggested to use one DIMM per channel
**** It is recommended to install the memory modules from the orange slots for better overclocking capability

So that is using 2 sticks of RAM not four in the orange slots only.

 

[mrdemon]

Hopalong X

I know all this already, I have them in the orange sockets. 1 Dimm per slot. How would I get 2 in 1 slot, lol.....

Anyway. It said it can take it but if I try XMP it dont like it, If I try anything like lowering the CPU voltage Nothing. I have had too go back too 1305 in the Bois too as it made it corrupt. And Im sure if i Put the 4gig back in there the damn thing would give me faster speed.

 

[Hopalong X]

I misunderstood. I thought you had 4 sticks in trying to get it to run 1600.

I didn't realize you had tried it with just 2 sticks already.
Just trying to help.
Mike

 

[Dave76]

I think im going to throw all my TOYS out of the pram in a damn min.....

In a recent thred of mine I upgraded the MEM i had from 4 too 8 gig from 1333 too 1600, but under clocking the *******s as I cant for the love of me get them to get too 1600. Weather its the motherboard or the CPU being a bitch who knows, Now I see this thread and see that people getting in the 10k range and I am only getting the following................................................

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>winsat mem
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: System memory performance assessment ''
> Run Time 00:00:05.15
> Memory Performance 6845.00 MB/s
> Total Run Time 00:00:07.33

Just takes a little tweaking.

Your board should handle this.
Your board's website:

4 x DIMM, max. 16GB, DDR3 2000(O.C.) / 1600 / 1333 / 1066 MHz, Non ECC, un-buffered memory

How many RAM cards do you have installed?
Did you take out the old 4GB RAM and install all new RAM?

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs for all RAM cards.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Go to your BIOS and tell us what the CPU, RAM and North Bridge (NB) voltages are.

Sometimes the NB needs a voltage bump.

What exactly did you do to try and get the RAM at 1600?

 

[Speced]

DDR2 1066 4-4-4-12

 

[Britton30]

DDR2 1066 4-4-4-12

Very good! How much DDR2?

 

[Speced]

DDR2 1066 4-4-4-12

Very good! How much DDR2?

8GB

 

[StalkeR]

DDR2 1066 4-4-4-12

Great score !