Windows 7 Install is Failing and I'm about to quit

[imardnck]

I have Windows 7 64bit RTM and it came from technet. I will disable in the bios anything USB, since I have seen too many people stating to unplug USB. I will start the install and I see a screen that has the white line at the bottom of the screen with "Windows is starting..." Then the line fills twice, the screen will go blank, and I see the windows start up scree, for about 5-10 seconds, then I get a really pretty black screen with about a one inch red line across the top of the screen. There are a feew random dots on the screen, but that is when it stops. The hard drive and DVD drive does not do anything.

Could I have a bad d/l? Or is there something that I am missing.

Any help would be awesome, I would like to install windows 7 and having 8gb on this system is get when you have an OS that will support it.

TIA
Redneck

 

[Kari]

Hello Imardnck and welcome to the SevenForums.

You could try removing most of the RAM, leaving only one module to first slot. A 64-bit Seven has had known issues with installation when there's a lot of RAM. Disconnect also all external devices like CD/DVD, HD, USB HUB's and such. Burn your downloaded ISO with slowest possible speed using verification, and try once more before quitting!

After installation you can then put all the RAM back and reconnect all external devices.

Good luck,

Kari

 

[QuackPot]

I burned the iso file to a DVD (at the slowest speed setting) and it installed in well under 10 minutes.

Can you burn the iso file to a DVD instead of using a USB stick?

 

[DocBrown]

What kind of cable is connecting your video card to your monitor ?

Sometimes first install of Win7 works best with standard 15 pin vga cable to monitor.

Are you booting startup directly from DVD or doing install from within XP ?

" Doc "

 

[imardnck]

Thank you for all you help...

I do not have any external drives connected.
The install is also a clean install from the DVD...or I would like it to be...
Lastly, is burning the disc at a slower speed really helpful? just seems kind of odd to have the highest speed and not be able to use it...

I have the following burning programs at my disposal:

Alcohol 120%
Nero 7
ImgBurn

Which is the best?

I will also try the RAM Thing, but not until the morning...

Redneck

Kari...
Great LSL Pic

 

[DocBrown]

ImgBurn at 4x & with verify ON

Works best for me on over 10 DVD's during the Beta testing & the RTM from TechNet on Aug 6th.

 

[imardnck]

Doc

I have only a DVI cable, and the video card only supports DVI.

Don't have any other systems that support PCIe...

 

[DocBrown]

Is there anything on this HD already ? any current or previous operating system ?

I have had best luck pre-formatting HD's before I do a clean install of Win7

I hope it's not the video combo that is causing the lock up

 

[imardnck]

Same here, but I have noticed, looking at system specs, that there is someone with the same machine as me, and has windows 7 on it... I will try the recommendations, and getg back with all of you tomorrow...

 

[Dave76]

Doc

I have only a DVI cable, and the video card only supports DVI.

Don't have any other systems that support PCIe...

Does your Dell XPS 600 have integrated graphics on the mother board?
Generally used if your graphics card fails, so can use the computer until it's repaired/replaced.

You might try installing Win7 from a USB memory stick.

Just a suggestion, you can make sure you don't have a problem with the ISO burn to a DVD. If you suspect your installation DVD might be corrupt or want to ensure it's not corrupt, try this.

If you have a minimum 4GB USB memory stick, put Windows 7 on it, it will load faster and no burn errors.

The Seven Forums tutorial explains how to do it.

How to Create a Windows 7 Installation USB Key

This is easy and fast to put on a memory stick, less time then burning to a DVD. It will also install Windows 7 faster.

 

[QuackPot]

Thank you for all you help...

I do not have any external drives connected.
The install is also a clean install from the DVD...or I would like it to be...
Lastly, is burning the disc at a slower speed really helpful? just seems kind of odd to have the highest speed and not be able to use it...

I have the following burning programs at my disposal:

Alcohol 120%
Nero 7
ImgBurn

Which is the best?

I will also try the RAM Thing, but not until the morning...

Redneck

Kari...
Great LSL Pic

Yes!

It ensures that all the data is properly burned. Very important for isos.

I had ImgBurn at 2x & with verify ON and it worked a treat because before that I had it up at the fastest speed wit verify off and it would boot from the DVD.

 

[april]

hello sir! have you tried to check the compatibility? would you mind to check the compatibility first before you install it. and what kind of OS are you using before you install it?

 

[imardnck]

The machine does not have integrated Video...I will also try to do the USB Key...I'm gonna start with the RAM, and move down the road...

Wish me luck...

 

[DocBrown]

Good Luck & please post your results & more questions.

" Doc "

 

[imardnck]

Hey Everyone...

I am on WINDOWS 7....took long enough...actually, I did what everyone said, I removed the memory and burned the disk at 4x using Imgburn....This is awesome...I will be installing the memory one at a time until the machine is full..

Thanks again for everyones help...

 

[DocBrown]

Congrats imardnck,

Now you can read the tutorials & customizations threads for more stuff for Win7


" Doc "

 

[QuackPot]

Hey Everyone...

I am on WINDOWS 7....took long enough...actually, I did what everyone said, I removed the memory and burned the disk at 4x using Imgburn....This is awesome...I will be installing the memory one at a time until the machine is full..

Thanks again for everyones help...

Congrats. Enjoy Windows 7. I sure am.

 

[Dave76]

Hey Everyone...

I am on WINDOWS 7....took long enough...actually, I did what everyone said, I removed the memory and burned the disk at 4x using Imgburn....This is awesome...I will be installing the memory one at a time until the machine is full..

Thanks again for everyones help...

Glad that you got it

 

[Kari]

Nice!

 

[imardnck]

IT took me a while to figure out a small little problem, but all is better, I placed all 8 GB of RAM in my machine and this morning it would not boot...Found out that I had a bad memory module....That sucked....Have 4GB for now...Thank you again for everyone's help