I was having problems installing Windows 7 64-bit for a couple days. It was crashing and taking ridiculously long. After some research I removed all but 1 stick of RAM and everything went fine. After getting 7 installed I tried putting my remaining RAM in and the system freezes at the starting windows screen. It starts up and runs fine when I have 1 stick of RAM in. I have tested the RAM and it is all in good condition. I was running XP pro earlier this week on the exact same hardware with no issues.
I also tried manually setting my RAM in BIOS to:
Voltage: 1.90v and 1.8v
CL:4
tRCD:4
tRP:4
tRAS:12
Anyone have any ideas?
I also tried manually setting my RAM in BIOS to:
Voltage: 1.90v and 1.8v
CL:4
tRCD:4
tRP:4
tRAS:12
Anyone have any ideas?
My Computer
At a glance
Windows 7 64-bitPentium Core 2 Duo 2.3GHZ2x2GB DDR2 800 4-4-4-12 1.8-1.9vNvidia GeForce 7950 GT OC 512mb 256-bit
- OS
- Windows 7 64-bit
- CPU
- Pentium Core 2 Duo 2.3GHZ
- Memory
- 2x2GB DDR2 800 4-4-4-12 1.8-1.9v
- Graphics Card(s)
- Nvidia GeForce 7950 GT OC 512mb 256-bit
- Hard Drives
- Seagate Barracuda 7200.10