Solved Windows does not boot

[EzioAuditore]

Hi does lucid puppy backup ir files? If not then i don't know how to backup files with a pc which dont boots. And do u have skype? Could be easier to talk there.

What are ir files? And it doesn't matter if windows boots or not, that method involves booting from a live cd which doesn't depend on windows.
Did you go through the steps which i mentioned in my previous post about SFC and troubleshooting steps?
This forum is meant for public support. So, lets stick to the forums.

Umm i typed with my phone its 3.3 inch display it was supp0sed be be "backup your files"

Yes, you'll be able to backup all your files.

 

[TheGhastSlayer]

ok i have some problems. 1: sfc don't work 2: i don't know where my usb is (that pen thing) and 3 i dont understand troubleshooting page

 

[EzioAuditore]

ok i have some problems. 1: sfc don't work 2: i don't know where my usb is (that pen thing) and 3 i dont understand troubleshooting page

- SFC didn't run or you weren't able to run it? We can guide you through the steps if you wish though the tutorial is self-explanatory.

- You can burn the puppy linux iso to a cd also. In case your uncomfortable with linux, see point 9 of the below tutorial and choose your preferred method.
http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

- What exactly you didn't understand in the above linked tutorial? The points are well laid out with proper links.

 

[TheGhastSlayer]

ok i have some problems. 1: sfc don't work 2: i don't know where my usb is (that pen thing) and 3 i dont understand troubleshooting page

- SFC didn't run or you weren't able to run it? We can guide you through the steps if you wish though the tutorial is self-explanatory.

- You can burn the puppy linux iso to a cd also. In case your uncomfortable with linux, see point 9 of the below tutorial and choose your preferred method.
http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

- What exactly you didn't understand in the above linked tutorial? The points are well laid out with proper links.

What i didnt understand that boot into safe mode thing. i cant press F8 to go to advanced boot options so my friend read that i had to reinstall the os

 

[EzioAuditore]

ok i have some problems. 1: sfc don't work 2: i don't know where my usb is (that pen thing) and 3 i dont understand troubleshooting page

- SFC didn't run or you weren't able to run it? We can guide you through the steps if you wish though the tutorial is self-explanatory.

- You can burn the puppy linux iso to a cd also. In case your uncomfortable with linux, see point 9 of the below tutorial and choose your preferred method.
http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

- What exactly you didn't understand in the above linked tutorial? The points are well laid out with proper links.

What i didnt understand that boot into safe mode thing. i cant press F8 to go to advanced boot options so my friend read that i had to reinstall the os

You need to tap F8 as soon as the POST (or say BIOS) screen appears. What happens when you do so? It just boots to Windows Recovery environment w/o displaying advanced boot options?

 

[TheGhastSlayer]

- SFC didn't run or you weren't able to run it? We can guide you through the steps if you wish though the tutorial is self-explanatory.

- You can burn the puppy linux iso to a cd also. In case your uncomfortable with linux, see point 9 of the below tutorial and choose your preferred method.
http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

- What exactly you didn't understand in the above linked tutorial? The points are well laid out with proper links.

What i didnt understand that boot into safe mode thing. i cant press F8 to go to advanced boot options so my friend read that i had to reinstall the os

You need to tap F8 as soon as the POST (or say BIOS) screen appears. What happens when you do so? It just boots to Windows Recovery environment w/o displaying advanced boot options?

Exactly and i cant even start safe mode with cmd!

 

[EzioAuditore]

You said you even tried safe mode with command option? Exactly how you tried this?
Are you able to boot normally to windows?
Have you tried system restore? Boot up your system and when it arrives at the recovery environment, there should be an option of system restore.

 

[TheGhastSlayer]

You said you even tried safe mode with command option? Exactly how you tried this?
Are you able to boot normally to windows?
Have you tried system restore? Boot up your system and when it arrives at the recovery environment, there should be an option of system restore.

As i said earlier, i have tried all of the options. Nothing works. You can run safe mode if you type bcdedit /set {current} safe mode or something like that and there is another one but i dont remember. But i cant start safe mode with cmd either

 

[TheGhastSlayer]

No im not able to boot normally to windows but at the recovery stuff there is command prompt where i can type sfc /scannow and all that stuff

 

[TheGhastSlayer]

OK im creeped out now!!! I can't restore anymore!!! I could restore since i installed java update but none are available now!!! I'm not sure if i have an OS anymore!!!

 

[EzioAuditore]

No im not able to boot normally to windows but at the recovery stuff there is command prompt where i can type sfc /scannow and all that stuff

type bootrec /scanos in command window and see if it detects windows installation.
To be honest, it'd be quite quicker and wiser to just backup your data and do a repair install.

 

[TheGhastSlayer]

1. How to backup?
2. How to repair?

 

[EzioAuditore]

1. How to backup?
2. How to repair?

Both your questions has already been answered in the earlier ports. Go through this thread again from start.
You didn't even tell if its a laptop or desktop as most laptops come with a recovery partition pre-installed which will reset your machine to factory settings.

 

[writhziden]

You can backup your computer with: http://www.sevenforums.com/tutorials/93347-copy-paste-windows-recovery-console.html

You can repair your computer with a clean install. http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html

1. How to backup?
2. How to repair?

Both your questions has already been answered in the earlier ports. Go through this thread again from start.
You didn't even tell if its a laptop or desktop as most laptops come with a recovery partition pre-installed which will reset your machine to factory settings.

Or you can use the factory system image as suggested. That would probably be the safer route if you have the recovery partition intact. We would need to know what laptop/desktop vendor you have to help you with this.

i gotta go to sleep now... See ya tomorrow.

In the meantime,
Backup your files first-- Backup your files-- http://www.sevenforums.com/software/198909-lucid-puppy-way-recover-files-non-bootable-computer.html

Then try running these:

http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

 

[TheGhastSlayer]

1. How to backup?
2. How to repair?

Both your questions has already been answered in the earlier ports. Go through this thread again from start.
You didn't even tell if its a laptop or desktop as most laptops come with a recovery partition pre-installed which will reset your machine to factory settings.

I have laptop

 

[writhziden]

What vendor? HP, Dell, etc.?

What model?

 

[TheGhastSlayer]

What vendor? HP, Dell, etc.?

What model?

Packard Bell Easynote TM

 

[EzioAuditore]

Also, Open a command window and type diskpart and hit enter.
Enter the commands one at a time.

list disk
select disk <number that is displayed for first command>
list partition

OR
Download partition wizard home edition iso, burn and boot from it and post a screenshot of the disk layout.
www.partitionwizard.com/partition-wizard-bootable-cd.html

 

[TheGhastSlayer]

Also, Open a command window and type diskpart and hit enter.
Enter the commands one at a time.

list disk
select disk <number that is displayed for first command>
list partition

OR
Download partition wizard home edition iso, burn and boot from it and post a screenshot of the disk layout.
www.partitionwizard.com/partition-wizard-bootable-cd.html

why list partition and disk? I have the os i think. I have the files though, cause i loaded drivers like that other guy said and i can delete stuff and copy from there.

 

[TheGhastSlayer]

Also, Open a command window and type diskpart and hit enter.
Enter the commands one at a time.

list disk
select disk <number that is displayed for first command>
list partition

OR
Download partition wizard home edition iso, burn and boot from it and post a screenshot of the disk layout.
www.partitionwizard.com/partition-wizard-bootable-cd.html

why list partition and disk? I have the os i think. I have the files though, cause i loaded drivers like that other guy said and i can delete stuff and copy from there.

Hmm where do i get the iso? i only donwload exe. Do i install the exe file to get the iso?