WLM won't sign in

[Mesho90]

hey everyone
I have been trying to sign in to WLM but it won't, I did a troubleshoot and it showed that everything is good and checked, except " IE's offline setting... " unchecked. Internet Explorer is not on offline mode.

help please
​

 

[StalkeR]

There must be some error code. Take a look better. Also look this site.
http://msn-errors.blogspot.com/

You should find your error code there,also and the solution.

 

[Mesho90]

sorry I forgot to post it

Error Code: 80048820
​

 

[StalkeR]

Copied from the site above

MSN Messenger Error Code - 80048820

When you try and launch MSN Messenger and try to logon, you get an error message 80048820. A wild guess, your system time / date needs adjusting.
The Cause of Code 80048820

There are a variety of causes of this error:
1) Incorrect Proxy Setting for Internet Explorer.
2) softpub.dll may have become unregistered.
3) Your system clock may be showing an incorrect time (or date!).
4) Firewall problems.

The Solutions to MSN Error Code 80048820
Internet Explorer - Try removing Internet Explorer proxy server settings and go with the 'Automatically detect settings'.

1) Launch Internet Explorer, click "Tools" and then click Internet Options. From the Internet Options dialog box, go to the Connections tab. Click LAN Setting. Un check the Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections) checkbox. Finally positively tick: 'Automatically detect settings'.

2) Register softpub.dll.
Click Start (Button), and then click Run, type regsvr32 softpub.dll. Restart MSN Messenger. http://www.computerperformance.co.uk/Logon/code/code_81000314.htm

3) If necessary, logon as a local administrator, set the computer's clock to the correct date and time. (Check on the internet if possible.)

4) Turn off the firewall temporarily. Check firewall settings such as Norton: "Block access to secure sites". If this cures the problem, make sure that Microsoft's MSN Messenger is allowed full access through your firewall.

Additional
SOLUTION
If you are using a ‘NETGEAR Wirelss Router’ you will need to enter tthe ‘Netgear’ router set-up settings page, via internet Explorer.

1.Enter IP address 192.168.0.1 on the address bar.
2.Log on via your user name and password of your ISP.
3. Enter Admin, password
4.GOTO advance menu (left hand side of screen)
5.GOTO WAN set-up
6.GOTO MTU size, and change to 1400
7.Apply, OK.

 

[Mesho90]

thank you StalkeR, it was the date, I just had my laptop fixed and they must have changed the date.
​

 

[StalkeR]

You're welcome! Glad that help you.