sfc /scannow frozen.

[stevieray]

Sigh.

Anybody know what to do if sfc / scannow freezes in the middle of running? Mine stalled at verification 87% complete... stuck for an hour now.

Thanks!

 

[Brink]

Hello Stevieray,

You can just restart the computer. If have any problems with Windows 7 running properly afterwards, then you can do a repair install.

Hope this helps,
Shawn

 

[stevieray]

Thanks Brink. I was worried that stopping in the middle would cause problems, but it worked like a charm.

Thanks!

 

[Brink]

You're welcome. You might run a disk check to see if it may find any disk corruption that may have caused the hang up though.

 

[stevieray]

Good idea. That's one of the few tests I haven't run this past week. I assume I should exit all other programs before I run it... so catch y'all later!

If I'm not back in an hour, send a search party!

 

[Brink]

LOL, ok. I'll fly over with the ship and beam you back.

 

[stevieray]

Wow! That was fast!

I ran the full scan, fix, recover option... came back with "This disk is clean". It would take a half an hour to run the same on my ancient Dell with xp pro... even though the hd was only 20 Gb! Now it whipped through 500 in 20 seconds!

Zoom zoom.

 

[Win7User512]

Good idea. That's one of the few tests I haven't run this past week. I assume I should exit all other programs before I run it... so catch y'all later!

If I'm not back in an hour, send a search party!

I'll just send a Bing party. LOL.

Wow! That was fast!

I ran the full scan, fix, recover option... came back with "This disk is clean". It would take a half an hour to run the same on my ancient Dell with xp pro... even though the hd was only 20 Gb! Now it whipped through 500 in 20 seconds!

Zoom zoom.

Disk Check? There is no way a full scan completed in 20 seconds.

 

[stevieray]

Disk Check? There is no way a full scan completed in 20 seconds.

#@*&^$!

You're right. I just ran it again. The good news is it still came up clean. The bad news is it took 45 minutes this time.

Yesterday, the first three steps took twenty seconds to run; steps 4 and 5 flashed by too quickly to read. Today, the first three steps ran the same as yesterday, but steps four and five crawled.

I ran the two tests the same way... after all, they are only disk checks. They are not complex to run.

I'll add another quirk to the long list of problems that appeared in the past week. Win 7 went from spotless to a buggy mess on May 25th... a few minutes after installing the two MS "test" updates. It hasn't been the same since then.

 

[Win7User512]

#@*&^$!

You're right. I just ran it again. The good news is it still came up clean. The bad news is it took 45 minutes this time.

Yesterday, the first three steps took twenty seconds to run; steps 4 and 5 flashed by too quickly to read. Today, the first three steps ran the same as yesterday, but steps four and five crawled.

I ran the two tests the same way... after all, they are only disk checks. They are not complex to run.

I'll add another quirk to the long list of problems that appeared in the past week. Win 7 went from spotless to a buggy mess on May 25th... a few minutes after installing the two MS "test" updates. It hasn't been the same since then.

Those times sound right. So you didn't do a disk check at reboot?

 

[detoxa]

Sigh.

Anybody know what to do if sfc / scannow freezes in the middle of running? Mine stalled at verification 87% complete... stuck for an hour now.

Thanks!

I had same problem an hour or so ago , Only thing i did was do a hard reboot ( then a quick remount of the ISO via my Vista partition.)

Sorry for being no help.

http://www.sevenforums.com/installation-setup/11871-7137-problem.html

 

[stevieray]

Those times sound right. So you didn't do a disk check at reboot?

Yes, I did a disk check at reboot both yesterday and today. I had both of the boxes ticked both times, scheduled the disk check to run at start up, and then restarted my machine.

The steps I took were identical both days... I cannot understand why the run times were so wildly divergent, but I am getting used to it.

 

[Brink]

I've noticed that if you select to run Disk Check on a drive that Windows 7 is not installed on it runs faster depending on drive size of course. If you select the Windows 7 drive, then Disk Check will need to restart the computer to run the check at boot. This would take longer to run depending on drive size.