My default gateway is 0.0.0.0 how do i change my default gateway

[MvdB]

actually the truth is i dont know

If you are using the same pc... Then it is something else... You are not fully blockec.
Are you using SF through a browser? Does it recognise the www.sevenforums.com address?

yes

OK, that's a surprise... That works normally. Next question is... what does not work?
Appears you can surf, do DNS resolution, post stuff in SF...
Apart from the weird IPconfig settings, what does not work as you want it to?

 

[sal123]

If you are using the same pc... Then it is something else... You are not fully blockec.
Are you using SF through a browser? Does it recognise the www.sevenforums.com address?

yes

OK, that's a surprise... That works normally. Next question is... what does not work?
Appears you can surf, do DNS resolution, post stuff in SF...
Apart from the weird IPconfig settings, what does not work as you want it to?

i cant forward a port
which affects my download speed .it is really miserable 0.2kbps can you belive that .the port forwarding software i use doesn't recognize my gateway :sarc:

 

[sal123]

you lose the bet you think i have gone mad or what before posting this thread i have checked thousands of time

I'd just like to say that my PIBKAC comment was meant light heartedly, I didn't mean to offend and I'm truly sorry if I did. Thats why I put the and after it.

Well if it is showing 0.0.0.0 as default gateway in ipconfig/all you shouldn't have any internet? So now I'm really just like everyone else in this thread.

this is the mystery

 

[alphanumeric]

i cant forward a port
which affects my download speed .it is really miserable 0.2kbps can you belive that .the port forwarding software i use doesn't recognize my gateway :sarc:

Port forwarding at home would normally be done on "your" router, which would be your default gateway. The router obtains one public IP address from your ISP on its WAN side. On the LAN side the router gives out private ip addresses to each PC, normally something like 192.168.0.xxx. The IP address listed as default gateway in ipconfig would be the LAN side IP address or the router. Its the IP address you use to log into the router and setup port forwarding. The PCs on the LAN side are isolated from the WAN side (the internet) by NAT. Network Address Translation. This causes problems with some web based apps and requires you to port forward. You link a port on a PC to the WAN/Public IP your ISP gives the router.

If you are directly connected to the Internet, and not going though a router, you will get a public IP address from your ISP. In this case "you can not port forward". Your default gateway will be your ISP, it will be equipment belonging to them and totally under their control. You don't have access to change any settings etc.

sal123 would you please confirm that you use a mmx 310g 3g USB modem for your internet. And also post the first two sets of numbers listed under ipconfig as your ip address. If it is a public IP address you are wasting your time trying to port forward to your PC. I'm not trying to be a smart ass etc, I'm just trying to sort it out and maybe save you some headaches trying to do something that may not even be possible with your current Internet setup.

 

[Stonecaper]

Okay, I am very Sorry to revive a very old thread here But i am fed with a similar problem.I have been using two internet connections together, 1) an ADSl 2 MBPS wired connection via a router and 2)a 26 wireless Connection via a Docomo Sim on a LG turbo modem

My problem is the error 734 while accessing the second connection started a few days ago,i cant seem to get over it,i have enabled netBIOS over TCP\IP,disabled ipv6,but nothing seems to solve the problem
the simcard downloads data fine on a Mobile phone.

I am really frustrated,Please help me if you can

ipconfig/all copy-paste (ADSL Connection on) -

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\Stonecaper>ipconfig/all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Stonecaper-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : local.lan

PPP adapter Broadband Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Broadband Connection
   Physical Address. . . . . . . . . :
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 117.194.33.168(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
   DNS Servers . . . . . . . . . . . : 218.248.255.162
                                       218.248.255.163
   NetBIOS over Tcpip. . . . . . . . : Disabled

Unknown adapter Local Area Connection 2:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : LGE WirelessSA USB NDIS Device
   Physical Address. . . . . . . . . : 02-B1-A8-39-84-14
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . : local.lan
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 00-30-67-60-B7-CA
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, July 24, 2012 11:03:11 PM
   Lease Expires . . . . . . . . . . : Wednesday, July 25, 2012 11:03:10 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

C:\Users\Stonecaper>

ipconfig/all copy-paste (ADSL Connection off) -

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\Stonecaper>ipconfig/all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Stonecaper-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : local.lan

Unknown adapter Local Area Connection 2:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : LGE WirelessSA USB NDIS Device
   Physical Address. . . . . . . . . : 02-B1-A8-39-84-14
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . : local.lan
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 00-30-67-60-B7-CA
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, July 24, 2012 11:03:10 PM
   Lease Expires . . . . . . . . . . : Wednesday, July 25, 2012 11:03:09 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

C:\Users\Stonecaper>

and My network Connection -

 

[trex6187]

same problem like sal i use mmx310g datacard and bsnl sim

James has a good point! You need netbios or something like it for your Session Layer.

If your up to it, there's a great, but somewhat technical tutorial here: http://www.sevenforums.com/tutorials/55419-internetwork-troubleshooting-guide.html

If that's too much: check this:

To enable NetBIOS over TCP/IP:
Click Start, and then click Network. (Or you can click Start, type ncpa.cpl into the search box, and press ENTER).
Click on the Network and Sharing Center, and then click Manage Network Connections.
Right click on the Local Area Connection or the connection you are using.
Select the Internet Protocol version 4 (TCP/IPv4)
Click the Advanced button under the General tab.
Click the WINS tab.

You should see a similar screen as below. Make sure the buttun the arrow points to is on.... That says that your DHCP server gives you the netbios settings. That is how it should be. If in doubt, post your version of this screen.

View attachment 162587

Good luck!

the button you showed is not being allowed to click but i have enabled netbios over tcp/ip

I read the whole thread and found that sal has done mistake here, he didnt go to the LAN properties he actually gone to the BSNL EAST INTERNET(connection profile name) properties and there the option is not allowed to click that what is sal saying. Anyways i go the LAN IPV4 PROPERTIES and saw that the settings(see screenshots) are correct. My default gateway is also 0.0.0.0 and i m able to access internet. see screenshots.. I didnt do anything like sal123 but i have seen peoples who use broadband have default gateway 0.0.0.0 even if it is broadband...

:shock:

 

[chev65]

This problem is usually caused by either an out of date driver or the router needs a firmware update or replacement.

There is also a way to fix this problem manually by typing the correct default gateway into the IPv4 properties. The link below shows you how.

Windows 7 Unidentified Network, Limited Access, No Internet Connection Problem Resolved