Windows 7 x86 update problem 80070643 and 80071A91 errors

[NoelDP]

Did you check to see which drive actually contained the arpab folder first? which driver letter was it?

 

[ArtoPower]

Did you check to see which drive actually contained the arpab folder first? which driver letter was it?

Yes i done . firts i wrote C:/arpab then cmd found this files and then i wrote xcopy c:/arpab c:/windows/winsxs

 

[ArtoPower]

Did you check to see which drive actually contained the arpab folder first? which driver letter was it?

NoelDP ! Look ! i havn't got any errors !

 

[ArtoPower]

But updates don't install with the same errors

 

[NoelDP]

What did you do?

Please run SFC /SCANNOW again and post the new CBS.logfile.

 

[ArtoPower]

What did you do?

Please run SFC /SCANNOW again and post the new CBS.logfile.

i done what you had written in 10 post.
but i boot repair computer by ERD Commander 7.0 !

 

[NoelDP]

You have some nasty errors in the background CBS log - please try this...

reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.


Pick the option to use a Command Prompt
At the prompt type
DISM /image:C:\ /cleanup-image /revertpendingactions

Post any output.

(note: you will have to use the proper drive letter for the command - the C:\ shown may well not be correct)

Once complete, reboot to Normal Mode Windows, and then do another Check for Updates, and attempt to install ONLY the oldest update - what happens?

 

[ArtoPower]

You have some nasty errors in the background CBS log - please try this...

reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.


Pick the option to use a Command Prompt
At the prompt type
DISM /image:C:\ /cleanup-image /revertpendingactions

Post any output.

(note: you will have to use the proper drive letter for the command - the C:\ shown may well not be correct)

Once complete, reboot to Normal Mode Windows, and then do another Check for Updates, and attempt to install ONLY the oldest update - what happens?

/image:C:\ /cleanup-image /revertpendingactions was message like operation done
but nothing changed. i tried to install one oldest update . it's not installed with error 80071A91

 

[NoelDP]

PLease post the new CBS.log, and the C:\Windows\windowsupdate.log files

 

[ArtoPower]

PLease post the new CBS.log, and the C:\Windows\windowsupdate.log files

logs

 

[ArtoPower]

PLease post the new CBS.log, and the C:\Windows\windowsupdate.log files

Noel hi ! Have you an idea what to do with these ?

 

[NoelDP]

Not a clue at the moment - and I have to go attend a wake tonight

Back tomorrow evening.

 

[ArtoPower]

Not a clue at the moment - and I have to go attend a wake tonight

Back tomorrow evening.

Thanks for the reply. i sorry for disturbing .

 

[NoelDP]

Try this...

Open an Elevated Command Prompt, and run the following commands

ATTRIB -H -S C:\Windows\System32\config\TxR\*.*
DEL C:\Windows\System32\config\TxR\*.*
fsutil resource setautoreset true C:\
 
.

WAIT 10 minutes or so after the command prompt returns, then reboot. (post back first if you get any error messages!)

Try Windows Update again.

 

[ArtoPower]

Try this...

Open an Elevated Command Prompt, and run the following commands

ATTRIB -H -S C:\Windows\System32\config\TxR\*.*
DEL C:\Windows\System32\config\TxR\*.*
fsutil resource setautoreset true C:\
 
.

WAIT 10 minutes or so after the command prompt returns, then reboot. (post back first if you get any error messages!)

Try Windows Update again.

Hello Noel ! I have error

Microsoft Windows [Version 6.1.7601]
(c) (Microsoft Corp.), 2009.

C:\Windows\system32>ATTRIB -H -S C:\Windows\System32\config\TxR\*.*

C:\Windows\system32>DEL C:\Windows\System32\config\TxR\*.*
C:\Windows\System32\config\TxR\*.*, Продолжить [Y(да)/N(нет)]? y
C:\Windows\System32\config\TxR\{5263194c-0dc2-11e4-9a59-806e6f6e6963}.TM.blf
The process can not access the file because the file is in use by another process
C:\Windows\System32\config\TxR\{5263194c-0dc2-11e4-9a59-806e6f6e6963}.TMContaine
r00000000000000000001.regtrans-ms
The process can not access the file because the file is in use by another process
C:\Windows\System32\config\TxR\{5263194c-0dc2-11e4-9a59-806e6f6e6963}.TMContaine
r00000000000000000002.regtrans-ms
The process can not access the file because the file is in use by another process
C:\Windows\system32>

 

[NoelDP]

OK - I sorta half-expected that.
Try again while in Safe Mode - it may be more amenable to the commands there.

 

[ArtoPower]

OK - I sorta half-expected that.
Try again while in Safe Mode - it may be more amenable to the commands there.

Noel. the same error in safe mode

 

[NoelDP]

In that case, I suspect that the system is actually working fine
...which means that I'll have to look again for the cause of the errors - back this evening, hopefully!

 

[ArtoPower]

In that case, I suspect that the system is actually working fine
...which means that I'll have to look again for the cause of the errors - back this evening, hopefully!

system working not fine( some times blue screen is coming . error 0x00000093
and system working not fast

 

[NoelDP]

Please follow the http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html and post the resulting logs here - I'll see if I can get someone to try and interpret them.