BSOD after OS re-installation

[Snapp]

Hello! I have recently encountered multiple BSODs over the last few days. I initially thought that it was OS related, and my first course of action was to re-install Windows 7 Professional 32-Bit. Unfortunately, I am still suffering the same BSOD issues I had prior OS re-installation. I had just finished my 2nd re-install today when I suffered another BSOD crash! This system was initially built in April 2007, with upgrades to RAM, Video Card, and Hard drive over the last 18 months. After researching these symptoms, I must assume that this is a hardware related issue. Any help you can provide in tracking down the source of my problems, would be greatly appreciated! Required file attachments attached below.

 

[yowanvista]

The problem may lie in your CPU
Check if your CPU is properly seated in the socket and ensure that it is not overheating

This test below will tell us if your CPU is defective or not

   Information

Run Prime 95 again to test your CPU.. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, 85b4f01c, b2000040, 800}

Probably caused by : hardware

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 85b4f01c, Address of the WHEA_ERROR_RECORD structure.
Arg3: b2000040, High order 32-bits of the MCi_STATUS value.
Arg4: 00000800, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


OVERLAPPED_MODULE: Address regions for 'CTEXFIFX' and 'CTEXFIFX.SYS' overlap

BUGCHECK_STR:  0x124_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  1f

STACK_TEXT:  
8c9088ac 82c27f3f 00000124 00000000 85b4f01c nt!KeBugCheckEx+0x1e
8c9088e8 82d1ef04 86464c31 85b4f01c 82cb84f0 hal!HalBugCheckSystem+0xab
8c908918 82c281f1 85b50d48 82c35e40 00000000 nt!WheaReportHwError+0x230
8c908a2c 82c282e3 85b50d48 85b50d98 00000004 hal!HalpMcaReportError+0x3b
8c908a50 82c283ff 00000000 85b50d98 00000000 hal!HalpMceHandler+0x8b
8c908a70 82c28548 00000000 85b50d48 8c908b90 hal!HalpMceHandlerWithRendezvous+0x4b
8c908a80 82c1e5f5 00000000 00000000 00000000 hal!HalpHandleMachineCheck+0x34
8c908b90 82c1b261 0000001b 8c903750 00000000 hal!HalpMcaExceptionHandler+0x87
8c908b90 00000000 0000001b 8c903750 00000000 hal!HalpMcaExceptionHandlerWrapper+0x89


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  0x124_GenuineIntel_PROCESSOR_BUS

BUCKET_ID:  0x124_GenuineIntel_PROCESSOR_BUS

Followup: MachineOwner
---------