BSOD Error 0x00007a after hearing buzzing sound

[Baloch]

i m getting BSOD error after hearing buzzing sound from my pc
error is :
KERNEL_DATA_INPAGE_ERROR
Stop 0x00007A

i m using my pc after 2 or 3 hour i hear buzzing sounds from my pc then suddenly my desktop freeze and i get BSOD error , can someone please help me to fix it

I have attached my DM Log file , please check it and help me

 

[Arc]

Hi Baloch.

The zip you uploaded does not contain any crash dump.

Follow it: http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

Edit: Also test your HDD using Data Lifeguard Diagnostic for Windows and let us know the result.

 

[Baloch]

Hi Baloch.

The zip you uploaded does not contain any crash dump.

Follow it: http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Done.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Waiting for BSOD....

Dont run any disc cleanup tool before you upload another zip.

ok

Edit: Also test your HDD using Data Lifeguard Diagnostic for Windows and let us know the result.

I have downloaded the Data LifeGuard Diagnostic but what should i select

1) To Test oR

2) TO RUN SMART status.

If i select test then which option should i select from it

• QUICK TEST - performs SMART drive quick self-test to gather and verify the Data Lifeguard information contained on the drive.
• EXTENDED TEST - performs a Full Media Scan to detect bad sectors. Test may take several hours to complete depending on the size of the drive.
• WRITE ZEROS - writes zeros to the drive with options of Full Erase and Quick Erase. File system and data will be lost.
• VIEW TEST RESULT - displays the latest test results.

 

[Arc]

First test quick test and then opt for extended test too. Dont opt for write zeros.

 

[Baloch]

should i test it on logical driver or physical driver

 

[Baloch]

i have done physical Drive test

Quick Test i get this error
Test Option: QUICK TEST Model Number: WDC WD5000AADS-00S9B0 Unit Serial Number: WD-WCAV91261728 Firmware Number: 01.00A01 Capacity: 500.11 GB SMART Status: PASS Test Result: FAIL Test Error Code: 06-Quick Test on drive 1 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 1! Test Time: 17:24:02, May 20, 2014

 

[Arc]

If the HDD is under warranty, get a replacement.

Otherwise, back up your data externally and get a new HDD.

A failing HDD is one of the most regular causes of a stop 0x7A BSOD. A typical crash dump for a stop 0x7A looks like ....

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.

So as the HDD is failing in your case, it is expected that replacing the HDD will cure the BSODs.

 

[Baloch]

and i get this result when i finished extended test

Test Option: EXTENDED TEST Model Number: WDC WD5000AADS-00S9B0 Unit Serial Number: WD-WCAV91261728 Firmware Number: 01.00A01 Capacity: 500.11 GB SMART Status: PASS Test Result: FAIL Test Error Code: 08-Unable to repair bad sectors. Test Time: 19:46:25, May 20, 2014

i wasn't able to repair the bad sectors

 

[Arc]

Please follow post #7.

 

[Baloch]

thats why my hdd dont read any disk i insert it
sure i will follow my the post #7 and get a new hdd 500 gb

 

[Arc]

If there is any further issue after replacing the HDD, let us know.

 

[Baloch]

i m back after replacing the HDDeverything was working fine but again now i m using my pc after 10 or 15 minute i hear buzzing sound and my browsers get freeze or stuck and i cant do anything after waiting for 2 or 3 minute i get blue screen of death?can u please tell me what is the problem now , my hdd works fine now?

 

[Baloch]

i have testedmy HDD using Data Lifeguard Diagnostic for Windows and the result are here:

Quick Test Result

Test Option: QUICK TEST Model Number: WDC WD5000AADS-00S9B0 Unit Serial Number: WD-WCAV91261728 Firmware Number: 01.00A01 Capacity: 500.11 GB SMART Status: PASS Test Result: PASS Test Time: 13:53:54, August 23, 2014

 

[Baloch]

Pic of blue screen

Here is my New DM Log file , please check it and help me

 

[Baloch]

bump

 

[Arc]

If you are sure that the HDD is actually replaced, take the Data Lifeguard Diagnostic for Windows test on it again, the extended test.

It is the same disc failure.

 

[Baloch]

Test Option: EXTENDED TEST Model Number: WDC WD5000AADS-00S9B0 Unit Serial Number: WD-WCAV91261728 Firmware Number: 01.00A01 Capacity: 500.11 GB SMART Status: PASS Test Result: FAIL Test Error Code: 08- Test Time: 21:03:06, August 25, 2014

 

[Arc]

Test Result: FAIL

So now you know what is causing the BSOD.

Are you sure that the HDD is replaced?

 

[Arc]

Test result posted in post #6 ....

• Unit Serial Number: WD-WCAV91261728

Your post #12 says ....

i m back after replacing the HDD

Test result posted in post #17 .....

• Unit Serial Number: WD-WCAV91261728

So apparently it is the same HDD and post #12 is a false statement.

 

[mohavepc]

either there are 2 internal drives and the one failing was not replaced or the failing drive is attached usb?