BSOD on Startup

[Benjomane]

Hey guys, I have an BSOD in last time often, most seconds after Windows has started. Sometimes, after the BSOD, when I start the system, there is the information, that no booting hardware is installed. The HardDrive is maybe not clearly started up. Maybe the Log Information will help.

 

[Benjomane]

The Dump

heres the zip file

 

[Boozad]

Welcome to 7F Benjomane, I'll take a look at your dumps and see if I can help resolve your issue.

I'd like to run a couple of diagnostic tests to check the integrity of your Hard Drive.

PROCESS_OBJECT: fffffa800ac94b30

IMAGE_NAME:  csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000 

PROCESS_NAME:  csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

BUGCHECK_STR:  0xF4_IOERR

PROCESS_OBJECT: fffffa8009e24730

IMAGE_NAME:  wininit.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: wininit

FAULTING_MODULE: 0000000000000000 

PROCESS_NAME:  wininit.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

BUGCHECK_STR:  0xF4_c0000005

CUSTOMER_CRASH_COUNT:  1

:ar: Download and run MemTest86+ to test your RAM. http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

   Note

Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.

:ar: Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

:ar: Run chkdsk. http://www.sevenforums.com/tutorials/433-disk-check.html

Report back with the results.