Impossible to rebuild MBR

[kalis8]

hi people!
on my laptop i have no OS installed and no partitions and windows cannot create partitions during installation, the disk cannot be written on apparently, i tried all the prompt commands to rebuild the MBR and other programs like mbrfix and ultimate boot cd but no result...i cannot find a solution to rebuild the MBR and create and format partitions to install windows. i have a dell xps 13 9333 with ssd 256gb, i did the bios tests and all are positive so i cannot understand if it is a hardware problem.
i searched A LOT before asking for help!
during installation when windows tries to format partitions mostly i got error 0x80070057 and once i got error 0x80042404
anybody ANY suggestion on how to rebuild the MBR? Please I'm going crazy any help and advice is greatly appreciated Thanks a lot

 

[samuria]

Just delete all partitions DO NOT create any then let windows create what it needs you may be trying to create a the mbr on a gpt disk https://support.microsoft.com/en-gb/help/2476568/error-0x80070057-when-you-format-a-hard-disk-drive-to-install-windows-7

 

[Bat 1]

Not a Samsung SSD ?

Installed USB3 Drivers into Install Media ?

 

[kalis8]

Not a Samsung SSD ?

no it's a liteonit...btw why?

 

[Bat 1]

no it's a liteonit...btw why?

Special Drivers. You did integrate the USB3 Drivers into both the Install and Boot wims ?

 

[kalis8]

what do you mean by "special drivers"?...i didn't do that, it's a totally new procedure please explain what it's about and how do i do that?

 

[Ranger4]

kalis8. This MS website should help you. Read through it & follow the directions. Do you have a Windows 7 installation DVD, which you will need to use to follow the directions in the website.

https://support.microsoft.com/en-us/help/2476568/error-0x80070057-when-you-format-a-hard-disk-drive-to-install-windows-7

 

[kalis8]

samuria and ranger4 thanks as i wrote i did a lot of research and tried that solution too...it worked once then i wanted to clean install win10 so i cleaned the ssd and tried to format again, from that point win7 nor win10 can format the partition for installation, as i wrote i tried other commands (diskpart, chkdsk which says the disk is blocked and cannot repair) and programs like ubcd and mbrfix
bat1 please as soon as you read reply thanks!

 

[kalis8]

i tried to clean the disk with Active@killdisk (hardware level wiping) and result is:
"Cannot update device Fixed Disk 1 (/dev/sda). I/O error"

i run deep bios tests and they are all positive! this is the first problem in years i cannot solve

so is my sdd faulty or maybe it's something else like missing drivers, firmware or what?

 

[SIW2]

is my sdd faulty

Go to the drive manufacturer website , they may have a tool for checking/fixing drive problems.

 

[SIW2]

Downloads | Firmware

or

LITEONIT Solid State Drive Firmware Update Driver Details | Dell US

 

[kalis8]

that's a firmware not a testing software right? do i go with that?