Solved Intel (R) network adapter not present on this computer

[nullzella]

I bought my costum build Desktop PC yesterday and installed the Windows 7 OS. I found out that there were no connections available on the internet. I did I thus checked iff I had any devices listed in the Problem Device section (did msinfo32 -> Components) and saw I had 6 devices which didn't had their driver installed.

These are the Device that don't have their Driver installed =

Ethernet Controller PCI\VEN_1969&DEV_E091&SUBSYS_E0911849&REV_10\4&23B6D2A4&0&00E3

Not Available
ACPI\INT33A0\0

PCI Simple Communications Controller PCI\VEN_8086&DEV_8CBA&SUBSYS_8CBA1849&REV_00\3&11583659&0&B0

SM Bus Controller PCI\VEN_8086&DEV_8CA2&SUBSYS_8CA21849&REV_00\3&11583659&0&FB

Universal Serial Bus (USB) Controller PCI\VEN_1B21&DEV_1142&SUBSYS_11421849&REV_00\4&1791F6DD&0&00E6

Universal Serial Bus (USB) Controller PCI\VEN_8086&DEV_8CB1&SUBSYS_8CB11849&REV_00\3&11583659&0&A0



I already tried installing the Windows 7 LAN driver for Asrock Z97 motherboard and nothing happened.

 

[oscer1]

Hi try the drivers from here ASRock > Fatal1ty Z97X Killer

 

[nullzella]

Asrock Z97 Killer

I tried this and it says the following message = Cannot Install drivers. No Intel(R) Adapters are present in this computer. I also activated the SNMP service because it wasn't activated before and it still gives the same error.

I also tried to google the code with the Ethernet Controller which give me a specifique driver to download. The error i get there is the following = The remote name could not be solved: 'db1.drivernavigator.com'

 

[oscer1]

lan driver should be atheros from link. install the inf driver from the link first

 

[nullzella]

INF & Atheros

AFter running the INF setup first and ATheros setup afterwards, the installation proces asked me to restart my computer so I did. Afterwards i had a Killer Network Application on my desktop and I ran a Killer Diagnose. I only added the content which is new to the txt file. The rest was basically everything that was listed in the dxdiag.txt file.

With the Killer Network Manager I have 4 things to chose from namely = Applications, Network,Prestations and Killer Ethernet. I'm not sure what I need to do here to make my drivers work.

 

[nullzella]

Update

It seems My Killer e2200 Gigabit Ethernet Controller actually now has a driver.

Only The PCI SImple Communications Controller, USB Controller and a Unknown Device don't have a driver.

Still no connections for the internet appears. A network cable is not properly plugged in or may be broken.



Nevermind the problem is fixed thank you for your help

 

[oscer1]

Ok good news glad you got it worked out