Need cmd prompt info to repair ntoskrnl.exe

[jakedog]

I have the win 7 update disk and I want to repair noskrnl.exe. The regular recovery would not fix ie. So I want to use the command prompt in repair. First off x=sources ? What do I put there. Also if you could give me the list of commands in the order to do this./ Any help would be appreciated.

 

[samuria]

We need more info of what you want to do ie extract a file and over write files

 

[jakedog]

Want I wanted to do was to use my win 7 64 bit upgrade disk to expand the ntoskrnl.exe into my OS to try and fix it. But now I don't know if that's the total problem. Since I been having BSOD's I ran mem test,reseated all my ram and graphics card and sound card. Ran sfc/scan now to no avail. I did notice also when I tried to update my AMD drivers for my graphics card.it hasn't installed properly since I been having BSOD"s. I am attaching the .zip report so that there is a possibility that I can get out of this mess with the least damage.

 

[samuria]

You cant use the upgrade disk to fix it as the files will be old you would need to have a disk at the same service pack and update as the pc or it would be wrong ile and make things worse. Run these as they give us more info





Please download MINITOOLBOX and run it.
Downloading MiniToolBox

Checkmark following boxes:



Flush DNS
Reset FF proxy Settings
Reset Ie Proxy Settings
Report IE Proxy Settings
Report FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size
List Devices (problems only)



Click Go and post the result.


Please download and save FRST 64bit or FRST 32 bit to your Desktop.

http://download.bleepingcomputer.com/farbar/FRST.exe

http://download.bleepingcomputer.com/farbar/FRST64.exe

Right click to run as administrator (XP users click run after receipt of Windows Security Warning - Open File). When the tool opens click Yes to disclaimer.
Make sure that Addition option is checked.
Press Scan button.
It will produce a log called FRST.txt in the same directory the tool is run from.
Please copy and paste log back .
The first time the tool is run it generates another log (Addition.txt - also located in the same directory as FRST.exe/FRST64.exe).

 

[jakedog]

OK here are the files you requested.

 

[samuria]

There are tons of problems



Date: 2017-04-06 16:15:25.263
Description:
Windows is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\drivers\atikmpag.sys because file hash could not be found on the system. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.


Run check disk


Error: (07/23/2018 06:15:46 PM) (Source: Service Control Manager) (EventID: 7026) (User: )
Description: The following boot-start or system-start driver(s) failed to load:
AsIO
discache
NNSALPC
NNSHTTP
NNSHTTPS
NNSIDS
NNSPICC
NNSPIHSW
NNSPOP3
NNSPROT
NNSPRV
NNSSMTP
NNSSTRM
NNSTLSC
PSINKNC
spldr
Wanarpv6
Event ID 7026: - TechNet Articles - United States (English) - TechNet Wiki


Name: WPD FileSystem Volume Driver
Description: WPD FileSystem Volume Driver
Class Guid: {eec5ad98-8080-425f-922a-dabf3de3f69a}
Manufacturer: Microsoft
Service: WUDFRd
Problem: : This device cannot start. (Code10)
Resolution: Device failed to start. Click "Update Driver" to update the drivers for this device.
On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard.


the host file has 12686 entries replace with blank one this can kill the system

There are 6091 more sites. in IE


If you have a backup with an imaging software I would try rerunning sp1 and then you may have to do updates but that will replace all system files Remove any software you dontuse as you have loads of things installed

 

[Snick]

Since OP doesn't have any AV listed, I'd run Malwarebytes too!
Sounds like a need for a Repair Install

 

[samuria]

His running


Panda Antivirus Pro (HKLM\...\{13084428-D664-43C4-8245-3E58F9712696}) (Version: 8.31.30 - Panda Security) Hidden
Panda Antivirus Pro (HKLM-x32\...\Panda Universal Agent Endpoint) (Version: 17.00.02.0000 - Panda Security)
Panda Devices Agent (HKLM-x32\...\{3F9548B2-0B34-4453-A92E-35056B053F19}) (Version: 1.08.00 - Panda Security) Hidden
Panda Devices Agent (HKLM-x32\...\Panda Devices Agent) (Version: 1.03.08 - Panda Security) Hidden

 

[jakedog]

I use Malwarebytes all the time to scan. I found nothing. Also I have Windows 7 upgrade disk which doesn't have SP1. I have SP1 installed but got rid of SP1 update long ago. so I can't uninstall it. So I can ONLY do a clean install right ?

 

[samuria]

A clean install will always be the best option and make pc faster