PC not working

[RevCrew1]

I have a problen with my PC, when I turn it there is no response on the keyboard and monitor. The only way i managed to turn it on is by jumpstarting the BIOS pins. And then it works for sometime untill it crashes to a blue screen . And today i completely removed to power cable to cool it off and when i try the bios pin jumper it doesn't work at all, it only turn on the power but no response not even the reset button works.

 

[Megahertz07]

"when I turn it on there is no response on the keyboard and monitor". - No image? No beeps?

"The only way i managed to turn it on is by jump starting the BIOS pins." - BIOS is a program so there are no pins to jump. Please explain what you where doing.

"And then it works for sometime until it crashes to a blue screen . And today i completely removed to power cable to cool it off and when i try the bios pin jumper it doesn't work at all, it only turn on the power but no response not even the reset button works." No beeps?

It can be many things.
I would say that is on the MoBo or Power supply.

 

[Eric3742]

Just a comment:

by jumpstarting the BIOS pins.

It is no good to do this all the time, as it may affect the MB and its components.

When you are doing these, do you remove the PSU first and disconnect all the devices connected to it.



This should be the last option if all else failed.
This is mainly for battery failure that cause the date/time error &or Bios setting issue.

 

[RevCrew1]

"when I turn it on there is no response on the keyboard and monitor". - No image? No beeps?

"The only way i managed to turn it on is by jump starting the BIOS pins." - BIOS is a program so there are no pins to jump. Please explain what you where doing.

"And then it works for sometime until it crashes to a blue screen . And today i completely removed to power cable to cool it off and when i try the bios pin jumper it doesn't work at all, it only turn on the power but no response not even the reset button works." No beeps?

.

When I said BIOS pins I mean there are 3 pins right next to the round battery looking thing can't remember what's it called and the 2 pins are connected with a green jumper while the 3rd bottom one is exposed. And there is no response at all except 1 beep when I turn the computer on

 

[Lance1]

There is no response at all except 1 beep when I turn the computer on

That 1 beep indicates a memory error according to Gigabyte motherboard beep codes. If you have more then two sticks of ram, pull them all and test them one at a time in slot #1. If the beep code changes please post the beep sequence. Here are the beep codes from Gigabyte.

1.AWARD BIOS 1short beep ：System normal. 2 short beep ：CMOS Error. 1 long beep and 1 short beep：Memory error. 1 long beep and 2 short beep：Graphic card error. 1 long beep and 3 short beep ：AGP error. 1 long beep and 9 short beep ：Memory Error. Continuous long beep ：Memory not correctly installed. Continuous short beep ：Power supply unit failed. 2.AMI BIOS 1 short beep ：Memory Error. 2 short beep：Memory parity check error. 3 short beep ：basic memory 64K address check error. 4 short beep ：Real Time Clock malfunction. 5 short beep ：CPU error. 6 short beep：Keyboard error. 7 short beep ：CPU interruption error. 8 short beep：Graphic card error. 9 short beep ：Memory error. 10 short beep ：CMOS error. 11 short beep ：CPU cache memory malfunction.

 

[RevCrew1]

I forgot to change the motherboard description here I don't use Gigabyte anymore now its MSI. Sometimes i get 1 short beep and sometimes no beep at all

 

[RevCrew1]

Still nothing...

 

[Lance1]

Take a look at the MSI Beep Codes If you have an AMD BIOS This might be your issue. What version do you have?

*1beep - Refresh failure - (NO VIDEO) memory refresh failure (bad memory)