Post Your Overclock! [2]

[Britton30]

I hope your health and head get better mate! Don't make me come over there!

 

[ganjiry]

I hope your health and head get better mate! Don't make me come over there!

Cheers chap but i'm sound and will soldier on through as always

 

[ganjiry]

Here's my latest cpu oc based on some suggested settings from Solarsunshine. It still needs some tweaking though but it's stable so far.
Cpu multi = 20.5, Fsb = 219, Vcore = 1.452. Llc = High
Cpu/nb = 2417@ = 1.250v, llc = High
HT Link freq = 2417 @ = 1.212v
Mem freq = 1756 @ 1.50v

Cinebench Score
Cpu = 5.46
Open GL = 50.30.
Thats a couple of points down on previous scores though so gotta get my thinking cap on..

 

[Britton30]

Great job on your RAM Ryan.

 

[ganjiry]

Great job on your RAM Ryan.

Cheers chap

 

[Dude]

Looking good Ganjiry

 

[ganjiry]

After a bit of tweaking but not fully stable as its failing on the second pass of IBT

 

[Solarstarshines]

After a bit of tweaking but not fully stable as its failing on the second pass of IBT

LLC should be fixing that you should have the option of putting optimization in effect as that is the power settings and power delivery fast you pretty much have the same bios but not the same chip so ......

yours won't do it unless you pump something like 1.47volts usually I wouldn't say match volt to speed but it seems that way with AMD 1.46 v-core should put 4.6 ghz stable with LLC high both turbo off spread spectrum off I can't even remember all my tweeks unless I go into bios and look but for the sake of showing overclocks here is mine

 

[ganjiry]

After a bit of tweaking but not fully stable as its failing on the second pass of IBT

LLC should be fixing that you should have the option of putting optimization in effect as that is the power settings and power delivery fast you pretty much have the same bios but not the same chip so ......

yours won't do it unless you pump something like 1.47volts usually I wouldn't say match volt to speed but it seems that way with AMD 1.46 v-core should put 4.6 ghz stable with LLC high both turbo off spread spectrum off I can't even remember all my tweeks unless I go into bios and look but for the sake of showing overclocks here is mine

I think it maybe down to the bios i'm using (1301). PWM Phase control is locked to extreme for some reason. Plus i have a few little bugs with the cpu/nb voltage and llc that is known on this bios or some say early boards shipped with bios 0404 which mine was.
On the cpu llc i need to set it ultra high to get a stable voltage.
With high llc i can set 1.472 in the bios which will give me 1.452-1.464 @ idle and drooping to 1.440 under load hence IBT not passing the second run. Ultra high tightens up the difference and has so far been the most stable although i haven't tried it yet on these settings.
I'll lower the vcore and raise the llc to ultra high which should give me the same voltage but shouldn't droop below 1.452 i think.
Cpu/nb llc is not right though as if i set 1.263 in the bios it will give me 1.263-1.277 idle and anything upto 1.310.
Although temps are not an issue i don't want to be putting more voltage through it.

Edit: Nice oc chap Fairplay!

 

[kbrady1979]

Using Cinebench and MaxxMem for the first time on this rig.......no idea how these stack up!

 

[ganjiry]

Really good score's yo got there Nice 1

 

[Britton30]

Kelly the Maxxmem looks really good. I don't use Cinbench.

 

[kbrady1979]

Thanks guys!

 

[Britton30]

Here is mine from just now, just at stock settings I set manually, no XMP.

 

[kbrady1979]

That's some smokin' memory you got there. I wonder why it doesn't collect my CPU/RAM info at the top of the program like yours.......odd.

 

[Britton30]

That's some smokin' memory you got there. I wonder why it doesn't collect my CPU/RAM info at the top of the program like yours.......odd.

Good question it's the same vesrion. There are other whose don't show the specs either.

 

[kbrady1979]

Well, actually, now that I look at it, my version is 1.91. I didn't even pay attention to that.

 

[Britton30]

Well, actually, now that I look at it, my version is 1.91. I didn't even pay attention to that.

Oops, you're right, here's what I have. If I recall it was a PITA to get downloaded.

View attachment MaxxMEM2_preview.zip

 

[kbrady1979]

I was d/l'ing it as soon as I saw it was out of date. Collected CPU information, but not RAM information.

 

[ganjiry]

Really nice score's both Fast ram