Post Your Overclock! [2]

[Britton30]

Thanks Ryan, I don't understand why Tommy's won't show the RAM info.

Here's this, pretty good today.

 

[ganjiry]

Nice score there mate thats pretty darn close to 30k enit. I think i've only seen Paulpicks post over 30k so far.
MaxxMem wouldn't show some info when i was running my 965be.
On HWiNFO64 sensor page the reading for the cpu/nb is a bit buggy. If i set it to 2400Mhz it shows 2400 but if i then raise the fsb it will still only show the 2400.

 

[Solarstarshines]

My CineBench

 

[ganjiry]

My CineBench

Fairplay! I gotta get me one of those 8350's but its gonna have to wait on a windfall lol

 

[kbrady1979]

My CineBench

Very nice!

 

[Solarstarshines]

So Far so good Currently testing IBT Already passed 2 times all good temps are at 45c im going to do 10 passes but looks like this Puppy can Bang out that 5ghz easy

 

[Solarstarshines]

5ghz

Cinebench would be higher if I didn't have the forum open lol

 

[ganjiry]

Very nice mate Good job

 

[Solarstarshines]

Very nice mate Good job

It was Scary like trying to Skydive I said my Prayers and hoped for the best

 

[ganjiry]

Lols yeah i bet
I've not done anything else with mine as i'm waiting on that bios chip to arrive. Hopefully that bios is a lot better and i can get this cpu properly stable. It should come pre flashed with 1703.
I still get scared of the voltage i'm adding lol and didn't want to add anymore eventhough temps were still good. My chip has a really low VID of 1.337 so should do better than it has been enit.

 

[Solarstarshines]

The chip you have can go 5 ghz easy I read so many reviews on how they push that chip hard

 

[ganjiry]

I don't think i've seen 1 post where a 6100 got 5Ghz. Fairplay to em. Hopefully i'll get some better results but i shall take it easy as i just want to get it properly stable. The cpu/nb v on this is terrible. it's currently set 1.25v in bios which in windows bounces around between 1.244 and 1.296, 1.268 @ load. The majority of time its at 1.257 lol. If i use med llc instead of high it gets worse and goes over 1.3v. It's drove me mad for ages.

Edit: here a HWiNFO64 graph @ idle and then i cinebench run. Note vcore is stable @ 1.452v with the odd drop to 1.440 but cpu/nb is up n down.
I know that it should be doing that due to llc but not as much.

Edit 2: after a quick google i see these doing 5Ghz but with some serious voltage's. 1.6v :O

 

[Britton30]

Congrats on 5GHz Tommy.
Ryan don't stress trying to get 5GHz, I got it once with my i5 but now run 4.4GHz daily which is a full GHz above stock frequency. Remember the people who write about the great overclock have money to burn or AMD/Intel supplies chips by the tray and they pick the best ones.

 

[paulpicks21]

Congrats on 5GHz Tommy.
Ryan don't stress trying to get 5GHz, I got it once with my i5 but now run 4.4GHz daily which is a full GHz above stock frequency. Remember the people who write about the great overclock have money to burn or AMD/Intel supplies chips by the tray and they pick the best ones.

Wise words.

 

[Solarstarshines]

Yea Don't worry trying to get up that high

I wanted to see if I could do it and make it work during IBT @5ghz it ran for like 2 passes then hung the program froze but my PC was still working so I took that as it wasn't ment to be and after hitting 5Ghz I went back to my 24/7 clock of 4.812 Ghz

It was fun trying 4.921 Ghz failed after 8 passes which I think was good enough but it didn't do the last two so hence there is a problem there but on the flip side very satisfied with what I have and i'm part of the 5ghz club yea Buddy

 

[Solarstarshines]

Congrats on 5GHz Tommy.
Ryan don't stress trying to get 5GHz, I got it once with my i5 but now run 4.4GHz daily which is a full GHz above stock frequency. Remember the people who write about the great overclock have money to burn or AMD/Intel supplies chips by the tray and they pick the best ones.

That is really true these people buy like 5 chips and push them all to hell then sell the one's that didn't make there cut

 

[ganjiry]

Don't worry folks
I have absolutely no intention of trying that high i'm not that brave nor clued up enough. I plan to stick with 4.5/6 but want to get to the bottom of why my cpu/nb v and llc is so fkt.
I bugged me big time for age's and is the reason i ent enjoyed playing with my board/cpu as much as i wanted. Hopefully a more mature bios will solve this.
Yeah i know what some of these overclocker's spend lol. I spend a bit of time on the ROG forum's and those guys are nutz. They go out n buy boxes of gpu/cpu's n ring their necks to cherry pick the good one's.
Ok if you got the $$ and patience

 

[ganjiry]

I just found this very detailed comparrison of a lot of different fan's http://www.overclock.net/t/1274407/...e-array-of-tests-and-benchmarks#post_17562684
It's well worth a butcher's

 

[Dude]

Nice link ganjiry

 

[ganjiry]

Cheers chap. Yeah there's some really handy info enit.